l2bd¶
2n1l-10ge2p1x710-avf-ethip4-l2bdbasemaclrn-scapy¶
2n1l-10ge2p1x710-avf-ethip4-l2bdbasemaclrn-scapy¶
L2 bridge-domain test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Both apply to all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge-domain switching. [Ver] TG verification: Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC792
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy¶
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy¶
L2BD test cases with ACL [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy¶
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy¶
L2BD test cases with ACL [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy¶
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy¶
L2BD test cases with ACL [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required MACIP ACL rules are applied to input paths of both DUT1 intefaces. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy¶
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy¶
L2BD test cases with ACL [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy¶
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy¶
L2BD test cases with ACL [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy¶
2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy¶
L2 bridge-domain test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Both apply to all links. [Cfg] DUT configuration: DUT1 is configured with L2 bridge-domain switching. [Ver] TG verification: Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC792
|
|
---|---|
|
|