ip4

2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy

2n1l-10ge2p1x710-ethip4-ip4base-adlalwlistbase-scapy

ADL Security IPv4 allowlist test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. ADL security allowlist are applied on DUT1 ingress interface from TG. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:

 Test Name 

 Status 

 64b-0c-ethip4- 
ip4base-adlalwlistbase-scapy

PASS

2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy

2n1l-10ge2p1x710-ethip4-ip4base-adlblklistbase-scapy

ADL Security IPv4 allowlist test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. ADL security allowlist are applied on DUT1 ingress interface from TG. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:

 Test Name 

 Status 

 64b-0c-ethip4- 
ip4base-adlblklistbase-scapy

PASS

2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy

2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-scapy

IPv4 iAcl whitelist test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. IPv4 iAcl security whitelist is applied on DUT1 ingress interface from TG. [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:

 Test Name 

 Status 

 64b-0c-ethip4- 
ip4base-iacldstbase-scapy

PASS

2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy

2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-scapy

IPv4 policer test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 on all links. [Cfg] DUT configuration: On DUT1 configure interfaces IPv4 adresses, and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface. [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1. [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.

 Test Name 

 Status 

 64b-0c-ethip4- 
ip4base-ipolicemarkbase-scapy

PASS

2n1l-10ge2p1x710-ethip4-ip4base-scapy

2n1l-10ge2p1x710-ethip4-ip4base-scapy

IPv4 routing test cases

[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing on both links. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries. [Ver] TG verification: Test IPv4 packet with IP protocol=61 is sent in one direction by TG on links to DUT1; on receive TG verifies packet for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC791, RFC826, RFC792

 Test Name 

 Status 

 64b-0c-ethip4-ip4base-scapy 

PASS

2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy

2n1l-10ge2p1x710-ethip4tcp-nat44det-scapy

NAT44 deterministic mode test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /24 route entries. DUT1 is tested with Intel-X710. [Ver] TG verification: Eth-IPv4-TCP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: RFC791, RFC793, RFC3022, RFC4787.

 Test Name 

 Status 

 64b-0c- 
ethip4tcp-nat44det-scapy

PASS

2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy

2n1l-10ge2p1x710-ethip4tcp-nat44ed-scapy

Connections per second NAT44 endpoint-dependent mode performance test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with Intel-X710. [Ver] TG verification: Eth-IPv4-TCP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: RFC791, RFC793, RFC3022, RFC4787.

 Test Name 

 Status 

 64b-0c-ethip4tcp-nat44ed-scapy 

PASS

2n1l-10ge2p1x710-ethip4udp-nat44det-scapy

2n1l-10ge2p1x710-ethip4udp-nat44det-scapy

NAT44 deterministic mode test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /24 route entries. DUT1 is tested with Intel-X710. [Ver] TG verification: Eth-IPv4-UDP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: RFC791, RFC768, RFC3022, RFC4787.

 Test Name 

 Status 

 64b-0c- 
ethip4udp-nat44det-scapy

PASS

2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy

2n1l-10ge2p1x710-ethip4udp-nat44ed-scapy

RFC2544: Pkt throughput NAT44 endpoint-dependent mode performance test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /22 route entries. DUT1 is tested with Intel-X710. [Ver] TG verification: Eth-IPv4-UDP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: RFC791, RFC768, RFC3022, RFC4787.

 Test Name 

 Status 

 64b-0c-ethip4udp-nat44ed-scapy 

PASS