srv6

eth2p-ethip6ip6-ip6base-srv6enc1sid-dev

Segment routing over IPv6 dataplane with one SID (SRH not inserted) test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with one SID - Segment Routing Header not inserted.

  • [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Status 

 78b-ethip6ip6- 
ip6base-srv6enc1sid-dev

PASS

eth2p-ethip6srhip6-ip6base-srv6enc2sids-dev

Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted.

  • [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Status 

 78b-ethip6srhip6- 
ip6base-srv6enc2sids-dev

PASS

eth2p-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-dev

Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted.

  • [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Status 

 78b-ethip6srhip6-ip6base- 
srv6enc2sids-nodecaps-dev

PASS

eth2p-ethip6srhip6-ip6base-srv6proxy-dyn-dev

Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.

  • [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Status 

 78b-ethip6srhip6-ip6base- 
srv6proxy-dyn-dev

PASS

eth2p-ethip6srhip6-ip6base-srv6proxy-masq-dev

Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.

  • [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Status 

 78b-ethip6srhip6-ip6base- 
srv6proxy-masq-dev

PASS

eth2p-ethip6srhip6-ip6base-srv6proxy-stat-dev

Segment routing over IPv6 dataplane with Static SRv6 proxy test cases.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted.

  • [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Status 

 78b-ethip6srhip6-ip6base- 
srv6proxy-stat-dev

PASS