ip4¶
eth2p-ethip4-ip4base-copblklistbase-dev¶
COP Security IPv4 whitelist test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. COP security white-lists is applied on DUT1 ingress interface from TG.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
|
|
|---|---|
|
PASS |
eth2p-ethip4-ip4base-copwhtlistbase-dev¶
COP Security IPv4 whitelist test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. COP security white-lists is applied on DUT1 ingress interface from TG.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
|
|
|---|---|
|
PASS |
eth2p-ethip4-ip4base-iacldstbase-dev¶
IPv4 iAcl whitelist test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. IPv4 iAcl security whitelist is applied on DUT1 ingress interface from TG.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
|
|
|---|---|
|
PASS |
eth2p-ethip4-ip4base-ipolicemarkbase-dev¶
IPv4 policer test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: On DUT1 configure interfaces IPv4 adresses, and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface.
[Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.
[Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
|
|
|---|---|
|
PASS |
eth2p-ethip4tcp-nat44det-dev¶
NAT44 deterministic mode test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /24 route entries. DUT1 is tested with virtual.
[Ver] TG verification: Eth-IPv4-TCP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
[Ref] Applicable standard specifications: RFC791, RFC793, RFC3022, RFC4787.
|
|
|---|---|
|
PASS |
eth2p-ethip4tcp-nat44ed-dev¶
Connections per second NAT44 endpoint-dependent mode performance test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with virtual.
[Ver] TG verification: Eth-IPv4-TCP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-TCP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
[Ref] Applicable standard specifications: RFC791, RFC793, RFC3022, RFC4787.
|
|
|---|---|
|
PASS |
eth2p-ethip4udp-nat44det-dev¶
NAT44 deterministic mode test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /24 route entries. DUT1 is tested with virtual.
[Ver] TG verification: Eth-IPv4-UDP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
[Ref] Applicable standard specifications: RFC791, RFC768, RFC3022, RFC4787.
|
|
|---|---|
|
PASS |
eth2p-ethip4udp-nat44ed-dev¶
RFC2544: Pkt throughput NAT44 endpoint-dependent mode performance test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /22 route entries. DUT1 is tested with virtual.
[Ver] TG verification: Eth-IPv4-UDP packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then Eth-IPv4-UDP packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG.
[Ref] Applicable standard specifications: RFC791, RFC768, RFC3022, RFC4787.
|
|
|---|---|
|
PASS |
eth2p-ethipv4-ip4base-dev¶
IPv4 routing test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing on both links.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries.
[Ver] TG verification: Test IPv4 packet with IP protocol=61 is sent in one direction by TG on links to DUT1; on receive TG verifies packet for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC791, RFC826, RFC792
|
|
|---|---|
|
PASS |