ip6¶
eth2p-ethip6-ip6base-copblklistbase-dev¶
COP Security IPv6 whitelist test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6 on all links.
[Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. COP security white-lists are applied on DUT1 ingress interface from TG.
[Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
|
|
|---|---|
|
PASS |
eth2p-ethip6-ip6base-copwhtlistbase-dev¶
COP Security IPv6 whitelist test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6 on all links.
[Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. COP security white-lists are applied on DUT1 ingress interface from TG.
[Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
|
|
|---|---|
|
PASS |
eth2p-ethip6-ip6base-iacldstbase-dev¶
IPv6 iAcl whitelist test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6 on all links.
[Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress interface from TG.
[Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
|
|
|---|---|
|
PASS |
eth2p-ethip6-ip6base-ipolicemarkbase-dev¶
IPv4 policer test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6 on all links.
[Cfg] DUT configuration: On DUT1 configure interfaces IPv6 adresses, and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface.
[Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.
[Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
|
|
|---|---|
|
PASS |
eth2p-ethipv6-ip6base-dev¶
IPv6 routing test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing on both links.
[Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries.
[Ver] TG verification: Test IPv6 packet is sent in one direction by TG on links to DUT1; on receive TG verifies packet for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861
|
|
|---|---|
|
PASS |