3n-skx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   89  208  317       114  238  347  
 4.   65  111  129        73  123  190  
 5.   92  134  145       103  130  140  

 1518b-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   77  195  295        69  140  250  
 4.   51   82   96        43   76   92  
 5.   60   80   96        65   92  107  

 imix-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.94      20.05 
 2.  6.00      20.26 

 imix-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.64      22.40 
 2.  6.67      22.51 

 imix-8t4c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.98      23.57 
 2.  7.09      23.92

25ge2p1xxv710-avf-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.14      38.83 
 2.  3.16      39.02 
  
 3.   60  188  292        81  226  339  
 4.   93  130  156        90  145  164  
 5.  149  214  232       155  221  241  

 1518b-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.52      43.48 
 2.  3.53      43.70 
  
 3.   67  182  299       106  218  329  
 4.   69  105  145        96  156  229  
 5.  202  250  290       245  289  311  

 imix-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.08      12.47 
 2.  4.10      12.54 

 imix-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.56      13.93 
 2.  4.61      14.07 

 imix-8t4c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.84      14.79 
 2.  4.87      14.87

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   22   58   80        21   66   99  
 4.   51  102  117        66  122  135  
 5.   96  129  149       120  154  166  

 1518b-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   22   42   70        21   41   72  
 4.   47   72   89        51   91  114  
 5.   69   85  100        81  119  135  

 imix-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  4.75      16.03 
 2.  4.80      16.19 

 imix-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.42      18.28 
 2.  5.44      18.37 

 imix-8t4c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.86      19.79 
 2.  5.92      19.98

25ge2p1xxv710-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  2.59      32.08 
 2.  2.59      32.08 
  
 3.   22   44   73        22   51   80  
 4.   51  108  135        55  136  163  
 5.  143  196  258       169  248  317  

 1518b-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  2.95      36.44 
 2.  2.95      36.44 
  
 3.   23   51   70        28   58   74  
 4.   44   64   93        56   87  103  
 5.  136  181  216       139  179  206  

 imix-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.43      10.47 
 2.  3.43      10.47 

 imix-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.84      11.72 
 2.  3.84      11.72 

 imix-8t4c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.19      12.79 
 2.  4.19      12.79