2.22. test_bfd module

BFD tests

class test_bfd.AuthKeyFactory

Bases: object

Factory class for creating auth keys with unique conf key ID

create_random_key(test, auth_type=4)

create a random key with unique conf key id

class test_bfd.BFD4TestCase(methodName='runTest')

Bases: framework.VppTestCase

Bidirectional Forwarding Detection (BFD)

pg0 = None

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_admin_up_down()

put session admin-up and admin-down

test_config_change_remote_demand()

configuration change while peer in demand mode

test_conn_down()

verify session goes down after inactivity

test_echo()

echo function

test_echo_fail()

session goes down if echo function fails

test_echo_looped_back()

echo packets looped back

test_echo_source_removed()

echo function stops if echo source is removed

test_echo_stop()

echo function stops if peer sets required min echo rx zero

test_hold_up()

hold BFD session up

test_immediate_remote_min_rx_reduction()

immediately honor remote required min rx reduction

test_intf_deleted()

interface with bfd session deleted

test_invalid_echo_checksum()

echo packets with invalid checksum don’t keep a session up

test_large_required_min_rx()

large remote required min rx interval

test_modify_detect_mult()

modify detect multiplier

test_modify_req_min_rx_double()

modify session - double required min rx

test_modify_req_min_rx_halve()

modify session - halve required min rx

test_no_periodic_if_remote_demand()

no periodic frames outside poll sequence if remote demand set

test_peer_discr_reset_sess_down()

peer discriminator reset after session goes down

test_poll_response()

test correct response to control frame with poll bit set

test_queued_poll()

test poll sequence queueing

test_session = None

test_session_down()

bring BFD session down

test_session_up()

bring BFD session up

test_session_up_by_ip()

bring BFD session up - first frame looked up by address pair

test_slow_timer()

verify slow periodic control frames while session down

test_stale_echo()

stale echo packets don’t keep a session up

test_zero_remote_min_rx()

no packets when zero remote required min rx interval

vpp_clock_offset = None

vpp_session = None

class test_bfd.BFD6TestCase(methodName='runTest')

Bases: framework.VppTestCase

Bidirectional Forwarding Detection (BFD) (IPv6)

pg0 = None

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_echo()

echo function

test_echo_looped_back()

echo packets looped back

test_hold_up()

hold BFD session up

test_intf_deleted()

interface with bfd session deleted

test_session = None

test_session_up()

bring BFD session up

test_session_up_by_ip()

bring BFD session up - first frame looked up by address pair

vpp_clock_offset = None

vpp_session = None

class test_bfd.BFDAPITestCase(methodName='runTest')

Bases: framework.VppTestCase

Bidirectional Forwarding Detection (BFD) - API

pg0 = None

pg1 = None

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_activate_auth()

activate SHA1 authentication

test_add_auth_nonexistent_key()

create BFD session using non-existent SHA1 (negative case)

test_add_bfd()

create a BFD session

test_add_bfd6()

create IPv6 BFD session

test_add_bfd_sha1()

create a BFD session (SHA1)

test_add_sha1_keys()

add SHA1 keys

test_change_key()

change SHA1 key

test_deactivate_auth()

deactivate SHA1 authentication

test_double_add()

create the same BFD session twice (negative case)

test_double_add_sha1()

create the same BFD session twice (negative case) (SHA1)

test_mod_bfd()

modify BFD session parameters

test_set_del_udp_echo_source()

set/del udp echo source

test_shared_sha1_key()

share single SHA1 key between multiple BFD sessions

class test_bfd.BFDAuthOnOffTestCase(methodName='runTest')

Bases: framework.VppTestCase

Bidirectional Forwarding Detection (BFD) (changing auth)

pg0 = None

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_auth_change_key_delayed()

change auth key without disturbing session state (delayed)

test_auth_change_key_immediate()

change auth key without disturbing session state (immediate)

test_auth_off_delayed()

turn auth off without disturbing session state (delayed)

test_auth_off_immediate()

turn auth off without disturbing session state (immediate)

test_auth_on_delayed()

turn auth on without disturbing session state (delayed)

test_auth_on_immediate()

turn auth on without disturbing session state (immediate)

test_session = None

vpp_session = None

class test_bfd.BFDCLITestCase(methodName='runTest')

Bases: framework.VppTestCase

Bidirectional Forwarding Detection (BFD) (CLI)

cli_verify_no_response(cli)

execute a CLI, asserting that the response is empty

cli_verify_response(cli, expected)

execute a CLI, asserting that the response matches expectation

pg0 = None

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_add_mod_del_bfd_udp()

create/modify/delete IPv4 BFD UDP session

test_add_mod_del_bfd_udp6()

create/modify/delete IPv6 BFD UDP session

test_add_mod_del_bfd_udp6_auth()

create/modify/delete IPv6 BFD UDP session (authenticated)

test_add_mod_del_bfd_udp_auth()

create/modify/delete IPv4 BFD UDP session (authenticated)

test_admin_up_down()

put session admin-up and admin-down

test_auth_on_off()

turn authentication on and off

test_auth_on_off_delayed()

turn authentication on and off (delayed)

test_set_del_meticulous_sha1_key()

set/delete meticulous SHA1 auth key

test_set_del_sha1_key()

set/delete SHA1 auth key

test_set_del_udp_echo_source()

set/del udp echo source

test_show()

show commands

class test_bfd.BFDFIBTestCase(methodName='runTest')

Bases: framework.VppTestCase

BFD-FIB interactions (IPv6)

static pkt_is_not_data_traffic(p)

not data traffic implies BFD or the usual IPv6 ND/RA

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_session = None

test_session_with_fib()

BFD-FIB interactions

vpp_session = None

class test_bfd.BFDSHA1TestCase(methodName='runTest')

Bases: framework.VppTestCase

Bidirectional Forwarding Detection (BFD) (SHA1 auth)

execute_rogue_session_scenario(vpp_bfd_udp_session, legitimate_test_session, rogue_test_session, rogue_bfd_values=None)

execute a rogue session interaction scenario

1. create vpp session, add config

2. bring the legitimate session up

3. copy the bfd values from legitimate session to rogue session

4. apply rogue_bfd_values to rogue session

5. set rogue session state to down

6. send message to take the session down from the rogue session

7. assert that the legitimate session is unaffected

pg0 = None

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_hold_up()

hold BFD session up

test_hold_up_meticulous()

hold BFD session up - meticulous auth

test_mismatch_auth()

session is not brought down by unauthenticated msg

test_mismatch_bfd_key_id()

session is not brought down by msg with non-existent key-id

test_mismatched_auth_type()

session is not brought down by msg with wrong auth type

test_restart()

simulate remote peer restart and resynchronization

test_send_bad_seq_number()

session is not kept alive by msgs with bad sequence numbers

test_session = None

test_session_up()

bring BFD session up

vpp_clock_offset = None

vpp_session = None

class test_bfd.BFDTestSession(test, interface, af, detect_mult=3, sha1_key=None, bfd_key_id=None, our_seq_number=None, tunnel_header=None, phy_interface=None)

Bases: object

BFD session as seen from test framework side

create_packet()

create a BFD packet, reflecting the current state of session

fill_packet_fields(packet)

set packet fields with known values in packet

inc_seq_num()

increment sequence number, wrapping if needed

send_packet(packet=None, interface=None)

send packet on interface, creating the packet if needed

update(my_discriminator=None, your_discriminator=None, desired_min_tx=None, required_min_rx=None, required_min_echo_rx=None, detect_mult=None, diag=None, state=None, auth_type=None)

update BFD parameters associated with session

verify_bfd(packet)

Verify correctness of BFD layer.

verify_sha1_auth(packet)

Verify correctness of authentication in BFD layer.

class test_bfd.BFDTunTestCase(methodName='runTest')

Bases: framework.VppTestCase

BFD over GRE tunnel

static pkt_is_not_data_traffic(p)

not data traffic implies BFD or the usual IPv6 ND/RA

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_bfd_o_gre()

BFD-o-GRE

test_session = None

vpp_session = None

test_bfd.bfd_session_down(test)

Bring BFD session down

test_bfd.bfd_session_up(test)

Bring BFD session up

test_bfd.getrandbits(k) → x. Generates an int with k random bits.

test_bfd.verify_bfd_session_config(test, session, state=None)

test_bfd.verify_event(test, event, expected_state)

Verify correctness of event values.

test_bfd.verify_ip(test, packet)

Verify correctness of IP layer.

test_bfd.verify_udp(test, packet)

Verify correctness of UDP layer.

test_bfd.wait_for_bfd_packet(test, timeout=1, pcap_time_min=None, is_tunnel=False)

wait for BFD packet and verify its correctness

Parameters

• timeout – how long to wait

• pcap_time_min – ignore packets with pcap timestamp lower than this

Returns

tuple (packet, time spent waiting for packet)