2.110. vpp_papi_provider module¶

class vpp_papi_provider.BRIDGE_FLAGS¶

ARP_TERM = 16¶

FLOOD = 4¶

FWD = 2¶

LEARN = 1¶

NONE = 0¶

UU_FLOOD = 8¶

class vpp_papi_provider.L2_PORT_TYPE¶

BVI = 1¶

NORMAL = 0¶

UU_FWD = 2¶

class vpp_papi_provider.L2_VTR_OP¶

L2_DISABLED = 0¶

L2_POP_1 = 3¶

L2_POP_2 = 4¶

L2_PUSH_1 = 1¶

L2_PUSH_2 = 2¶

L2_TRANSLATE_1_1 = 5¶

L2_TRANSLATE_1_2 = 6¶

L2_TRANSLATE_2_1 = 7¶

L2_TRANSLATE_2_2 = 8¶

class vpp_papi_provider.QOS_SOURCE¶

EXT = 0¶

IP = 3¶

MPLS = 2¶

VLAN = 1¶

exception vpp_papi_provider.UnexpectedApiReturnValueError¶

Bases: exceptions.Exception

exception raised when the API return value is unexpected

class vpp_papi_provider.VppPapiProvider(name, shm_prefix, test_class, read_timeout)¶

Bases: object

VPP-api provider using vpp-papi

@property hook: hook object providing before and after api/cli hooks

abf_itf_attach_add_del(is_add, attach)¶

abf_itf_attach_dump()¶

abf_policy_add_del(is_add, policy)¶

abf_policy_dump()¶

acl_add_replace(acl_index, r, tag='', expected_retval=0)¶: Add/replace an ACL :param int acl_index: ACL index to replace, 2^32-1 to create new ACL. :param acl_rule r: ACL rules array. :param str tag: symbolic tag (description) for this ACL. :param int count: number of rules.

acl_del(acl_index, expected_retval=0)¶

Parameters:	acl_index –
Returns:

acl_dump(acl_index, expected_retval=0)¶

acl_interface_add_del(sw_if_index, acl_index, is_add=1)¶

Add/Delete ACL to/from interface

Parameters:	sw_if_index – acl_index – is_add – (Default value = 1)

acl_interface_list_dump(sw_if_index=4294967295, expected_retval=0)¶

acl_interface_set_acl_list(sw_if_index, n_input, acls, expected_retval=0)¶

acl_interface_set_etype_whitelist(sw_if_index, n_input, whitelist, expected_retval=0)¶

add_node_next(node_name, next_name)¶

Set the next node for a given node request

Parameters:	node_name – next_name –

api(api_fn, api_args, expected_retval=0)¶

Call API function and check it’s return value. Call the appropriate hooks before and after the API call

Parameters:	api_fn – API function to call api_args – tuple of API function arguments expected_retval – Expected return value (Default value = 0)
Returns:	reply from the API

app_namespace_add(namespace_id, ip4_fib_id=0, ip6_fib_id=0, sw_if_index=4294967295, secret=0)¶

bd_ip_mac_add_del(bd_id, mac, ip, is_ipv6=0, is_add=1)¶

bfd_auth_del_key(conf_key_id)¶

bfd_auth_keys_dump()¶

bfd_auth_set_key(conf_key_id, auth_type, key)¶

bfd_udp_add(sw_if_index, desired_min_tx, required_min_rx, detect_mult, local_addr, peer_addr, is_ipv6=0, bfd_key_id=None, conf_key_id=None)¶

bfd_udp_auth_activate(sw_if_index, local_addr, peer_addr, is_ipv6=0, bfd_key_id=None, conf_key_id=None, is_delayed=False)¶

bfd_udp_auth_deactivate(sw_if_index, local_addr, peer_addr, is_ipv6=0, is_delayed=False)¶

bfd_udp_del(sw_if_index, local_addr, peer_addr, is_ipv6=0)¶

bfd_udp_del_echo_source()¶

bfd_udp_get_echo_source()¶

bfd_udp_mod(sw_if_index, desired_min_tx, required_min_rx, detect_mult, local_addr, peer_addr, is_ipv6=0)¶

bfd_udp_session_dump()¶

bfd_udp_session_set_flags(admin_up_down, sw_if_index, local_addr, peer_addr, is_ipv6=0)¶

bfd_udp_set_echo_source(sw_if_index)¶

bier_disp_entry_add_del(bdti, bp, payload_proto, next_hop_afi, next_hop, next_hop_tbl_id=0, next_hop_rpf_id=-1, next_hop_is_ip4=1, is_add=1)¶: BIER Route add/del

bier_disp_entry_dump(bdti)¶

bier_disp_table_add_del(bdti, is_add=1)¶: BIER Disposition Table add/del

bier_disp_table_dump()¶

bier_imp_add(bti, src, ibytes, is_add=1)¶: BIER Imposition Add

bier_imp_del(bi_index)¶: BIER Imposition del

bier_imp_dump()¶

bier_route_add_del(bti, bp, paths, is_add=1, is_replace=0)¶: BIER Route add/del

bier_route_dump(bti)¶

bier_table_add_del(bti, mpls_label, is_add=1)¶: BIER Table add/del

bier_table_dump()¶

bond_create(mode, lb, use_custom_mac, mac_address='')¶

Parameters:	mode – mode lb – load balance use_custom_mac – use custom mac mac_address – mac address

bond_delete(sw_if_index)¶

Parameters:	sw_if_index – interface the operation is applied to

bond_detach_slave(sw_if_index)¶

Parameters:	sw_if_index – slave interface the operation is applied to

bond_enslave(sw_if_index, bond_sw_if_index, is_passive, is_long_timeout)¶

Parameters:	sw_if_index – slave sw_if_index bond_sw_if_index – bond sw_if_index is_passive – is passive lacp speaker is_long_time – 90 seconds timeout instead of 3 seconds timeout

bridge_domain_add_del(bd_id, flood=1, uu_flood=1, forward=1, learn=1, arp_term=0, is_add=1)¶

Create/delete bridge domain.

Parameters:

bd_id (int) – Bridge domain index.
flood (int) – Enable/disable bcast/mcast flooding in the BD. (Default value = 1)
uu_flood (int) – Enable/disable unknown unicast flood in the BD. (Default value = 1)
forward (int) – Enable/disable forwarding on all interfaces in the BD. (Default value = 1)
learn (int) – Enable/disable learning on all interfaces in the BD. (Default value = 1)
arp_term (int) – Enable/disable arp termination in the BD. (Default value = 1)
is_add (int) – Add or delete flag. (Default value = 1)

bridge_domain_dump(bd_id=0)¶

Parameters:	bd_id (int) – Bridge domain ID. (Default value = 0 => dump of all existing bridge domains returned)
Returns:	Dictionary of bridge domain(s) data.

bridge_flags(bd_id, is_set, feature_bitmap)¶

Enable/disable required feature of the bridge domain with defined ID.

Parameters:	bd_id (int) – Bridge domain ID. is_set (int) – Set to 1 to enable, set to 0 to disable the feature. flags (int) – Bitmap value of the feature to be set: - learn (1 << 0), - forward (1 << 1), - flood (1 << 2), - uu-flood (1 << 3) or - arp-term (1 << 4).

classify_add_del_session(is_add, table_index, match, opaque_index=4294967295, hit_next_index=4294967295, advance=0, action=0, metadata=0)¶

Parameters:	is_add – table_index – match – opaque_index – (Default value = 0xFFFFFFFF) hit_next_index – (Default value = 0xFFFFFFFF) advance – (Default value = 0) action – (Default value = 0) metadata – (Default value = 0)

classify_add_del_table(is_add, mask, match_n_vectors=1, table_index=4294967295, nbuckets=2, memory_size=2097152, skip_n_vectors=0, next_table_index=4294967295, miss_next_index=4294967295, current_data_flag=0, current_data_offset=0)¶

Parameters:

is_add –
mask –
match_n_vectors – (Default value = 1)
table_index – (Default value = 0xFFFFFFFF)
nbuckets – (Default value = 2)
memory_size – (Default value = 2097152)
skip_n_vectors – (Default value = 0)
next_table_index – (Default value = 0xFFFFFFFF)
miss_next_index – (Default value = 0xFFFFFFFF)
current_data_flag – (Default value = 0)
current_data_offset – (Default value = 0)

cli(cli)¶

Execute a CLI, calling the before/after hooks appropriately.

Parameters:	cli – CLI to execute
Returns:	CLI output

collect_events()¶: Collect all events from the internal queue and clear the queue.

connect()¶: Connect the API to VPP

control_ping()¶

create_loopback(mac='')¶

Parameters:	mac – (Optional)

create_p2pethernet_subif(sw_if_index, remote_mac, subif_id)¶

Create p2p ethernet subinterface

Parameters:	sw_if_index – main (parent) interface remote_mac – client (remote) mac address

create_subif(sw_if_index, sub_id, outer_vlan, inner_vlan, no_tags=0, one_tag=0, two_tags=0, dot1ad=0, exact_match=0, default_sub=0, outer_vlan_id_any=0, inner_vlan_id_any=0)¶

Create subinterface from vpe.api: set dot1ad = 0 for dot1q, set dot1ad = 1 for dot1ad

Parameters:

sub_id – param inner_vlan:
sw_if_index –
outer_vlan –
inner_vlan –
no_tags – (Default value = 0)
one_tag – (Default value = 0)
two_tags – (Default value = 0)
dot1ad – (Default value = 0)
exact_match – (Default value = 0)
default_sub – (Default value = 0)
outer_vlan_id_any – (Default value = 0)
inner_vlan_id_any – (Default value = 0)

create_vhost_user_if(is_server, sock_filename, renumber, disable_mrg_rxbuf, disable_indirect_desc, custom_dev_instance, use_custom_mac, mac_address, tag='')¶

Parameters:	is_server – is server sock_filename – socket name renumber – renumber disable_mrg_rxbuf – disable mergable rx buffers disable_indirect_desc – disable indirect descriptors custom_dev_instance – custom dev instance use_custom_mac – use custom mac mac_address – mac address tag – tag (default ‘’)

create_vlan_subif(sw_if_index, vlan)¶

Parameters:	vlan – sw_if_index –

delete_loopback(sw_if_index)¶

delete_p2pethernet_subif(sw_if_index, remote_mac)¶

Delete p2p ethernet subinterface

Parameters:	sw_if_index – main (parent) interface remote_mac – client (remote) mac address

delete_subif(sw_if_index)¶

Delete subinterface

Parameters:	sw_if_index –

delete_vhost_user_if(sw_if_index)¶

Parameters:	sw_if_index – interface the operation is applied to

dhcp6_client_enable_disable(sw_if_index, prefix_group='', enable=1)¶

dhcp6_clients_enable_disable(enable=1)¶

dhcp6_pd_client_enable_disable(sw_if_index, prefix_group='', enable=1)¶

dhcp6_pd_send_client_message(msg_type, sw_if_index, T1, T2, prefixes, server_index=4294967295, irt=0, mrt=0, mrc=1, mrd=0, stop=0)¶

dhcp6_send_client_message(msg_type, sw_if_index, T1, T2, addresses, server_index=4294967295, irt=0, mrt=0, mrc=1, mrd=0, stop=0)¶

dhcp_client(sw_if_index, hostname, client_id='', is_add=1, set_broadcast_flag=1, want_dhcp_events=0)¶

dhcp_client_dump()¶

dhcp_proxy_config(dhcp_server, dhcp_src_address, rx_table_id=0, server_table_id=0, is_add=1, is_ipv6=0)¶

dhcp_proxy_set_vss(table_id, vss_type=255, vpn_ascii_id='', oui=0, vpn_index=0, is_add=1, is_ip6=0)¶

disconnect()¶: Disconnect the API from VPP

dslite_add_del_pool_addr_range(start_addr, end_addr, is_add=1)¶

Add/del address range to DS-Lite pool

Parameters:	start_addr – First IP address end_addr – Last IP address is_add – 1 if add, 0 if delete (Default value = 1)

dslite_set_aftr_addr(ip6, ip4)¶

Set DS-Lite AFTR addresses

Parameters:	ip4 – IPv4 address ip6 – IPv6 address

dslite_set_b4_addr(ip6, ip4)¶

Set DS-Lite B4 IPv6 address

Parameters:	ip4 – IPv4 address ip6 – IPv6 address

expect_negative_api_retval()¶: Expect API failure

expect_zero_api_retval()¶: Expect API success

gbp_contract_add_del(is_add, src_epg, dst_epg, acl_index)¶: GBP contract Add/Del

gbp_contract_dump()¶: GBP contract Dump

gbp_endpoint_add(sw_if_index, ips, mac, epg)¶: GBP endpoint Add

gbp_endpoint_del(handle)¶: GBP endpoint Del

gbp_endpoint_dump()¶: GBP endpoint Dump

gbp_endpoint_group_add_del(is_add, epg, bd, ip4_rd, ip6_rd, uplink_sw_if_index)¶: GBP endpoint group Add/Del

gbp_endpoint_group_dump()¶: GBP endpoint group Dump

gbp_recirc_add_del(is_add, sw_if_index, epg, is_ext)¶: GBP recirc Add/Del

gbp_recirc_dump()¶: GBP recirc Dump

gbp_subnet_add_del(is_add, table_id, is_internal, prefix, sw_if_index=4294967295, epg_id=65535, is_ip6=False)¶: GBP Subnet Add/Del

gbp_subnet_dump()¶: GBP Subnet Dump

geneve_add_del_tunnel(local_addr, remote_addr, mcast_sw_if_index=4294967295, is_add=1, is_ipv6=0, encap_vrf_id=0, decap_next_index=4294967295, vni=0)¶

Parameters:	remote_addr – local_addr – is_add – (Default value = 1) is_ipv6 – (Default value = 0) encap_vrf_id – (Default value = 0) decap_next_index – (Default value = 0xFFFFFFFF) mcast_sw_if_index – (Default value = 0xFFFFFFFF) vni – (Default value = 0)

gre_tunnel_add_del(src_address, dst_address, outer_fib_id=0, tunnel_type=0, instance=4294967295, session_id=0, is_add=1, is_ip6=0)¶

Add a GRE tunnel

Parameters:	src_address – dst_address – outer_fib_id – (Default value = 0) tunnel_type – (Default value = 0) instance – (Default value = 0xFFFFFFFF) session_id – (Defalt value = 0) is_add – (Default value = 1) is_ipv6 – (Default value = 0)

gtpu_add_del_tunnel(src_addr, dst_addr, is_add=1, is_ipv6=0, mcast_sw_if_index=4294967295, encap_vrf_id=0, decap_next_index=4294967295, teid=0)¶

Parameters:	is_add – (Default value = 1) is_ipv6 – (Default value = 0) src_addr – dst_addr – mcast_sw_if_index – (Default value = 0xFFFFFFFF) encap_vrf_id – (Default value = 0) decap_next_index – (Default value = 0xFFFFFFFF) teid – (Default value = 0)

igmp_clear_interface(sw_if_index)¶: Remove all (S,G)s from specified interface doesn’t send IGMP report!

igmp_dump(sw_if_index=None)¶: Dump all (S,G) interface configurations

igmp_enable_disable(sw_if_index, enable, host)¶: Enable/disable IGMP on a given interface

igmp_listen(filter, sw_if_index, saddrs, gaddr)¶

Listen for new (S,G) on specified interface

Parameters:	enable – add/del sw_if_index – interface sw index saddr – source ip4 addr gaddr – group ip4 addr

input_acl_set_interface(is_add, sw_if_index, ip4_table_index=4294967295, ip6_table_index=4294967295, l2_table_index=4294967295)¶

Parameters:	is_add – sw_if_index – ip4_table_index – (Default value = 0xFFFFFFFF) ip6_table_index – (Default value = 0xFFFFFFFF) l2_table_index – (Default value = 0xFFFFFFFF)

ip6_add_del_address_using_prefix(sw_if_index, address, prefix_length, prefix_group, is_add=1)¶

ip6_fib_dump()¶

ip6_mfib_dump()¶

ip6_nd_address_autoconfig(sw_if_index, enable, install_default_routes)¶

ip6_nd_proxy(address, sw_if_index, is_del=0)¶

ip6_sw_interface_enable_disable(sw_if_index, enable)¶: Enable/Disable An interface for IPv6

ip6_sw_interface_ra_config(sw_if_index, no, suppress, send_unicast)¶

ip6_sw_interface_ra_prefix(sw_if_index, address, address_length, use_default=0, no_advertise=0, off_link=0, no_autoconfig=0, no_onlink=0, is_no=0, val_lifetime=4294967295, pref_lifetime=4294967295)¶

ip6nd_send_router_solicitation(sw_if_index, irt=1, mrt=120, mrc=0, mrd=0)¶

ip_add_del_route(dst_address, dst_address_length, next_hop_address, next_hop_sw_if_index=4294967295, table_id=0, next_hop_table_id=0, next_hop_weight=1, next_hop_n_out_labels=0, next_hop_out_label_stack=[], next_hop_via_label=1048576, next_hop_id=4294967295, is_resolve_host=0, is_resolve_attached=0, classify_table_index=4294967295, is_add=1, is_drop=0, is_unreach=0, is_prohibit=0, is_ipv6=0, is_local=0, is_classify=0, is_multipath=0, is_dvr=0, is_udp_encap=0, is_source_lookup=0)¶

Parameters:

dst_address_length –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
dst_address –
next_hop_address –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
vrf_id – (Default value = 0)
lookup_in_vrf – (Default value = 0)
classify_table_index – (Default value = 0xFFFFFFFF)
is_add – (Default value = 1)
is_drop – (Default value = 0)
is_ipv6 – (Default value = 0)
is_local – (Default value = 0)
is_classify – (Default value = 0)
is_multipath – (Default value = 0)
is_resolve_host – (Default value = 0)
is_resolve_attached – (Default value = 0)
is_dvr – (Default value = 0)
is_source_lookup – (Default value = 0)
next_hop_weight – (Default value = 1)

ip_dump(is_ipv6=0)¶

Return IP dump.

Parameters:	is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

ip_fib_dump()¶

ip_mfib_dump()¶

ip_mroute_add_del(src_address, grp_address, grp_address_length, e_flags, next_hop_afi, next_hop_sw_if_index, next_hop_address, i_flags, bier_imp=0, rpf_id=0, table_id=0, is_add=1, is_ipv6=0, is_local=0)¶: IP Multicast Route add/del

ip_neighbor_add_del(sw_if_index, mac_address, dst_address, is_add=1, is_ipv6=0, is_static=0, is_no_adj_fib=0)¶

Add neighbor MAC to IPv4 or IPv6 address.

Parameters:	sw_if_index – mac_address – dst_address – is_add – (Default value = 1) is_ipv6 – (Default value = 0) is_static – (Default value = 0) is_no_adj_fib – (Default value = 0)

ip_neighbor_dump(sw_if_index, is_ipv6=0)¶

Return IP neighbor dump.

Parameters:	sw_if_index – is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

ip_punt_police(policer_index, is_ip6=0, is_add=1)¶

ip_punt_redirect(rx_sw_if_index, tx_sw_if_index, nh, is_ip6=0, is_add=1)¶

ip_reassembly_enable_disable(sw_if_index, enable_ip4=False, enable_ip6=False)¶: Enable/disable IP reassembly

ip_reassembly_get(is_ip6=0)¶: Get IP reassembly parameters

ip_reassembly_set(timeout_ms, max_reassemblies, expire_walk_interval_ms, is_ip6=0)¶: Set IP reassembly parameters

ip_table_add_del(table_id, is_add=1, is_ipv6=0)¶: :param table_id :param is_add: (Default value = 1) :param is_ipv6: (Default value = 0)

ip_unnumbered_dump(sw_if_index=4294967295)¶

ipip_6rd_add_tunnel(ip6_table_id, ip6_prefix, ip6_prefix_len, ip4_table_id, ip4_prefix, ip4_prefix_len, ip4_src, security_check)¶: 6RD tunnel Add

ipip_6rd_del_tunnel(sw_if_index)¶: 6RD tunnel Delete

ipip_add_tunnel(src_address, dst_address, is_ipv6=1, instance=4294967295, table_id=0, tc_tos=0)¶: IPIP tunnel Add/Del

ipip_del_tunnel(sw_if_index)¶: IPIP tunnel Delete

ipsec_interface_add_del_spd(spd_id, sw_if_index, is_add=1)¶

IPSEC interface SPD add/del - Wrapper to associate/disassociate SPD to interface in VPP Sample CLI : ‘set interface ipsec spd GigabitEthernet0/6/0 1’

:param spd_id - SPD ID to associate with the interface . mandatory :param sw_if_index - Interface Index which needs to ipsec association mandatory :param is_add - add(1) or del(0) association with interface (Default 1 - add) . optional :returns: reply from the API

ipsec_sad_add_del_entry(sad_id, spi, integrity_algorithm, integrity_key, crypto_algorithm, crypto_key, protocol, tunnel_src_address='', tunnel_dst_address='', is_tunnel=1, is_tunnel_ipv6=0, is_add=1, udp_encap=0)¶: IPSEC SA add/del :param sad_id: security association ID :param spi: security param index of the SA in decimal :param integrity_algorithm: :param integrity_key: :param crypto_algorithm: :param crypto_key: :param protocol: AH(0) or ESP(1) protocol :param tunnel_src_address: tunnel mode outer src address :param tunnel_dst_address: tunnel mode outer dst address :param is_add: :param is_tunnel: :** reference /vpp/src/vnet/ipsec/ipsec.h file for enum values of

crypto and ipsec algorithms

ipsec_spd_add_del(spd_id, is_add=1)¶

SPD add/del - Wrapper to add or del ipsec SPD Sample CLI : ‘ipsec spd add 1’

:param spd_id - SPD ID to be created in the vpp . mandatory :param is_add - create (1) or delete(0) SPD (Default 1 - add) .

optional

Returns:	reply from the API

ipsec_spd_add_del_entry(spd_id, sa_id, local_address_start, local_address_stop, remote_address_start, remote_address_stop, local_port_start=0, local_port_stop=65535, remote_port_start=0, remote_port_stop=65535, protocol=0, policy=0, priority=100, is_outbound=1, is_add=1, is_ipv6=0, is_ip_any=0)¶

IPSEC policy SPD add/del -: Wrapper to configure ipsec SPD policy entries in VPP

Parameters:	spd_id – SPD ID for the policy local_address_start – local-ip-range start address

:param local_address_stop : local-ip-range stop address :param remote_address_start: remote-ip-range start address :param remote_address_stop : remote-ip-range stop address :param local_port_start: (Default value = 0) :param local_port_stop: (Default value = 65535) :param remote_port_start: (Default value = 0) :param remote_port_stop: (Default value = 65535) :param protocol: Any(0), AH(51) & ESP(50) protocol (Default value = 0) :param sa_id: Security Association ID for mapping it to SPD :param policy: bypass(0), discard(1), resolve(2) or protect(3) action

(Default value = 0)

Parameters:	priority – value for the spd action (Default value = 100) is_outbound – flag for inbound(0) or outbound(1) (Default value = 1) is_add – (Default value = 1)

ipsec_tunnel_if_add_del(local_ip, remote_ip, local_spi, remote_spi, crypto_alg, local_crypto_key, remote_crypto_key, integ_alg, local_integ_key, remote_integ_key, is_add=1, esn=0, anti_replay=1, renumber=0, show_instance=0)¶

l2fib_add_del(mac, bd_id, sw_if_index, is_add=1, static_mac=0, filter_mac=0, bvi_mac=0)¶

Create/delete L2 FIB entry.

Parameters:

mac (str) – MAC address to create FIB entry for.
bd_id (int) – Bridge domain index.
sw_if_index (int) – Software interface index of the interface.
is_add (int) – Add or delete flag. (Default value = 1)
static_mac (int) – Set to 1 to create static MAC entry. (Default value = 0)
filter_mac (int) – Set to 1 to drop packet that’s source or destination MAC address contains defined MAC address. (Default value = 0)
bvi_mac (int) – Set to 1 to create entry that points to BVI interface. (Default value = 0)

l2fib_flush_all()¶: Flush all L2 FIB.

l2fib_flush_bd(bd_id)¶

Flush L2 FIB entries for bd_id.

Parameters:	sw_if_index (int) – Bridge Domain id.

l2fib_flush_int(sw_if_index)¶

Flush L2 FIB entries for sw_if_index.

Parameters:	sw_if_index (int) – Software interface index of the interface.

lisp_adjacencies_get(vni=0)¶

lisp_adjacency(leid, reid, leid_len, reid_len, eid_type, is_add=1, vni=0)¶

lisp_eid_table_dump(eid_set=0, prefix_length=0, vni=0, eid_type=0, eid=None, filter_opt=0)¶

lisp_enable_disable(is_enabled)¶

lisp_local_mapping(ls_name, eid_type, eid, prefix_len, vni=0, key_id=0, key='', is_add=1)¶

lisp_locator(ls_name, sw_if_index, priority=1, weight=1, is_add=1)¶

lisp_locator_dump(is_index_set, ls_name=None, ls_index=0)¶

lisp_locator_set(ls_name, is_add=1)¶

lisp_locator_set_dump()¶

lisp_remote_mapping(eid_type, eid, eid_prefix_len=0, vni=0, rlocs=[], rlocs_num=0, is_src_dst=0, is_add=1)¶

macip_acl_add(rules, tag='')¶

Add MACIP acl

Parameters:	rules – list of rules for given acl tag – acl tag

macip_acl_add_replace(rules, acl_index=4294967295, tag='')¶

Add MACIP acl

Parameters:	rules – list of rules for given acl tag – acl tag

macip_acl_del(acl_index)¶

Parameters:	acl_index –
Returns:

macip_acl_dump(acl_index=4294967295)¶: Return MACIP acl dump

macip_acl_interface_add_del(sw_if_index, acl_index, is_add=1)¶

Add MACIP acl to interface

Parameters:	sw_if_index – acl_index – is_add – (Default value = 1)

macip_acl_interface_get()¶: Return interface acls dump

map_add_domain(ip6_prefix, ip6_prefix_len, ip6_src, ip6_src_prefix_len, ip4_prefix, ip4_prefix_len, ea_bits_len=0, psid_offset=0, psid_length=0, is_translation=0, is_rfc6052=0, mtu=1280)¶

memif_create(role, mode, rx_queues=None, tx_queues=None, _id=None, socket_id=None, secret=None, ring_size=None, buffer_size=None, hw_addr=None)¶

memif_delete(sw_if_index)¶

memif_dump()¶

memif_socket_filename_add_del(is_add, socket_id, socket_filename)¶

memif_socket_filename_dump()¶

mfib_signal_dump()¶

mpls_fib_dump()¶

mpls_ip_bind_unbind(label, dst_address, dst_address_length, table_id=0, ip_table_id=0, is_ip4=1, is_bind=1)¶

mpls_route_add_del(label, eos, next_hop_proto, next_hop_address, next_hop_sw_if_index=4294967295, table_id=0, next_hop_table_id=0, next_hop_weight=1, next_hop_n_out_labels=0, next_hop_out_label_stack=[], next_hop_via_label=1048576, is_resolve_host=0, is_resolve_attached=0, is_interface_rx=0, is_rpf_id=0, is_multicast=0, is_add=1, is_drop=0, is_multipath=0, classify_table_index=4294967295, is_classify=0)¶

Parameters:

dst_address_length –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
dst_address –
next_hop_address –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
vrf_id – (Default value = 0)
lookup_in_vrf – (Default value = 0)
classify_table_index – (Default value = 0xFFFFFFFF)
is_add – (Default value = 1)
is_drop – (Default value = 0)
is_ipv6 – (Default value = 0)
is_local – (Default value = 0)
is_classify – (Default value = 0)
is_multipath – (Default value = 0)
is_multicast – (Default value = 0)
is_resolve_host – (Default value = 0)
is_resolve_attached – (Default value = 0)
next_hop_weight – (Default value = 1)

mpls_table_add_del(table_id, is_add=1)¶: :param table_id :param is_add: (Default value = 1)

mpls_tunnel_add_del(tun_sw_if_index, next_hop_proto_is_ip4, next_hop_address, next_hop_sw_if_index=4294967295, next_hop_table_id=0, next_hop_weight=1, next_hop_n_out_labels=0, next_hop_out_label_stack=[], next_hop_via_label=1048576, is_add=1, l2_only=0, is_multicast=0)¶

Parameters:

dst_address_length –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
dst_address –
next_hop_address –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
vrf_id – (Default value = 0)
lookup_in_vrf – (Default value = 0)
classify_table_index – (Default value = 0xFFFFFFFF)
is_add – (Default value = 1)
is_drop – (Default value = 0)
is_ipv6 – (Default value = 0)
is_local – (Default value = 0)
is_classify – (Default value = 0)
is_multipath – (Default value = 0)
is_resolve_host – (Default value = 0)
is_resolve_attached – (Default value = 0)
next_hop_weight – (Default value = 1)
is_multicast – (Default value = 0)

mpls_tunnel_dump(sw_if_index=4294967295)¶

nat44_add_del_address_range(first_ip_address, last_ip_address, is_add=1, vrf_id=4294967295, twice_nat=0)¶

Add/del NAT44 address range

Parameters:	first_ip_address – First IP address last_ip_address – Last IP address vrf_id – VRF id for the address range twice_nat – twice NAT address for extenal hosts is_add – 1 if add, 0 if delete (Default value = 1)

nat44_add_del_identity_mapping(ip='0', sw_if_index=4294967295, port=0, addr_only=1, vrf_id=0, protocol=0, tag='', is_add=1)¶

Add/delete NAT44 identity mapping

Parameters:	ip – IP address (Default value = 0) sw_if_index – Interface instead of IP address port – Port number (Default value = 0) addr_only – 1 if address only mapping, 0 if address and port vrf_id – VRF ID protocol – IP protocol (Default value = 0) tag – Opaque string tag is_add – 1 if add, 0 if delete (Default value = 1)

nat44_add_del_lb_static_mapping(external_addr, external_port, protocol, twice_nat=0, self_twice_nat=0, out2in_only=0, tag='', affinity=0, local_num=0, locals=[], is_add=1)¶

Add/delete NAT44 load balancing static mapping

Parameters:	twice_nat – 1 if translate external host address and port tag – Opaque string tag affinity – if 0 disabled, otherwise client IP affinity timeout

:param is_add - 1 if add, 0 if delete

nat44_add_del_static_mapping(local_ip, external_ip=0, external_sw_if_index=4294967295, local_port=0, external_port=0, addr_only=1, vrf_id=0, protocol=0, twice_nat=0, self_twice_nat=0, out2in_only=0, tag='', is_add=1)¶

Add/delete NAT44 static mapping

Parameters:

local_ip – Local IP address
external_ip – External IP address
external_sw_if_index – External interface instead of IP address
local_port – Local port number (Default value = 0)
external_port – External port number (Default value = 0)
addr_only – 1 if address only mapping, 0 if address and port
vrf_id – VRF ID
protocol – IP protocol (Default value = 0)
twice_nat – 1 if translate external host address and port
self_twice_nat – 1 if translate external host address and port whenever external host address equals local address of internal host
out2in_only – if 1 rule is matching only out2in direction
tag – Opaque string tag
is_add – 1 if add, 0 if delete (Default value = 1)

nat44_add_interface_addr(sw_if_index, twice_nat=0, is_add=1)¶

Add/del NAT44 address from interface

Parameters:	sw_if_index – Software index of the interface twice_nat – twice NAT address for extenal hosts is_add – 1 if add, 0 if delete (Default value = 1)

nat44_address_dump()¶: Dump NAT44 addresses :return: Dictionary of NAT44 addresses

nat44_del_session(addr, port, protocol, vrf_id=0, is_in=1, ext_host_address=None, ext_host_port=0)¶

Delete NAT44 session

Parameters:	addr – IPv4 address por – port number protocol – IP protocol number vrf_id – VRF ID is_in – 1 if inside network addres and port pari, 0 if outside ext_host_address – external host IPv4 address ext_host_port – external host port

nat44_forwarding_enable_disable(enable)¶

Enable/disable forwarding for NAT44

Parameters:	enable – 1 for enable, 0 for disable

nat44_identity_mapping_dump()¶: Dump NAT44 identity mappings :return: Dictionary of NAT44 identity mappings

nat44_interface_add_del_feature(sw_if_index, is_inside=1, is_add=1)¶

Enable/disable NAT44 feature on the interface

Parameters:	sw_if_index – Software index of the interface is_inside – 1 if inside, 0 if outside (Default value = 1) is_add – 1 if add, 0 if delete (Default value = 1)

nat44_interface_add_del_output_feature(sw_if_index, is_inside=1, is_add=1)¶

Enable/disable NAT44 output feature on the interface

Parameters:	sw_if_index – Software index of the interface is_inside – 1 if inside, 0 if outside (Default value = 1) is_add – 1 if add, 0 if delete (Default value = 1)

nat44_interface_addr_dump()¶: Dump NAT44 addresses interfaces :return: Dictionary of NAT44 addresses interfaces

nat44_interface_dump()¶: Dump interfaces with NAT44 feature :return: Dictionary of interfaces with NAT44 feature

nat44_interface_output_feature_dump()¶: Dump interfaces with NAT44 output feature :return: Dictionary of interfaces with NAT44 output feature

nat44_lb_static_mapping_dump()¶

Dump NAT44 load balancing static mappings

Returns:	Dictionary of NAT44 load balancing static mapping

nat44_static_mapping_dump()¶: Dump NAT44 static mappings :return: Dictionary of NAT44 static mappings

nat44_user_dump()¶

Dump NAT44 users

Returns:	Dictionary of NAT44 users

nat44_user_session_dump(ip_address, vrf_id)¶

Dump NAT44 user’s sessions

Parameters:	ip_address – ip adress of the user to be dumped cpu_index – cpu_index on which the user is vrf_id – VRF ID
Returns:	Dictionary of S-NAT sessions

nat64_add_del_interface(sw_if_index, is_inside=1, is_add=1)¶: Enable/disable NAT64 feature on the interface :param sw_if_index: Index of the interface :param is_inside: 1 if inside, 0 if outside (Default value = 1) :param is_add: 1 if add, 0 if delete (Default value = 1)

nat64_add_del_pool_addr_range(start_addr, end_addr, vrf_id=4294967295, is_add=1)¶

Add/del address range to NAT64 pool

Parameters:	start_addr – First IP address end_addr – Last IP address vrf_id – VRF id for the address range is_add – 1 if add, 0 if delete (Default value = 1)

nat64_add_del_prefix(prefix, plen, vrf_id=0, is_add=1)¶

Add/del NAT64 prefix

Parameters:	prefix – NAT64 prefix plen – NAT64 prefix length vrf_id – VRF id of tenant (Default 0) is_add – 1 if add, 0 if delete (Default value = 1)

nat64_add_del_static_bib(in_ip, out_ip, in_port, out_port, protocol, vrf_id=0, is_add=1)¶

Add/delete S-NAT static BIB entry

Parameters:	in_ip – Inside IPv6 address out_ip – Outside IPv4 address in_port – Inside port number out_port – Outside port number protocol – IP protocol vrf_id – VRF ID (Default value = 0) is_add – 1 if add, 0 if delete (Default value = 1)

nat64_add_interface_addr(sw_if_index, is_add=1)¶

Add/del NAT64 address from interface

Parameters:	sw_if_index – Software index of the interface is_add – 1 if add, 0 if delete (Default value = 1)

nat64_bib_dump(protocol=255)¶

Dump NAT64 BIB

Parameters:	protocol – IP protocol (Default value = 255, all BIBs)
Returns:	Dictionary of NAT64 BIB entries

nat64_get_timeouts()¶

Get values of timeouts for NAT64

Returns:	Timeouts for NAT64 (in seconds)

nat64_interface_dump()¶: Dump interfaces with NAT64 feature :return: Dictionary of interfaces with NAT64 feature

nat64_pool_addr_dump()¶: Dump NAT64 pool addresses :return: Dictionary of NAT64 pool addresses

nat64_prefix_dump()¶

Dump NAT64 prefix

Returns:	Dictionary of NAT64 prefixes

nat64_set_timeouts(udp=300, icmp=60, tcp_trans=240, tcp_est=7440, tcp_incoming_syn=6)¶

Set values of timeouts for NAT64 (in seconds)

Parameters:	udpi – UDP timeout (Default value = 300) icmp – ICMP timeout (Default value = 60) tcp_trans – TCP transitory timeout (Default value = 240) tcp_est – TCP established timeout (Default value = 7440) tcp_incoming_syn – TCP incoming SYN timeout (Default value = 6)

nat64_st_dump(protocol=255)¶

Dump NAT64 session table

Parameters:	protocol – IP protocol (Default value = 255, all STs)
Returns:	Dictionary of NAT64 sesstion table entries

nat66_add_del_interface(sw_if_index, is_inside=1, is_add=1)¶: Enable/disable NAT66 feature on the interface :param sw_if_index: Index of the interface :param is_inside: 1 if inside, 0 if outside (Default value = 1) :param is_add: 1 if add, 0 if delete (Default value = 1)

nat66_add_del_static_mapping(in_ip, out_ip, vrf_id=0, is_add=1)¶

Add/delete NAT66 static mapping

Parameters:	in_ip – Inside IPv6 address out_ip – Outside IPv6 address vrf_id – VRF ID (Default value = 0) is_add – 1 if add, 0 if delete (Default value = 1)

nat66_interface_dump()¶: Dump interfaces with NAT66 feature :return: Dictionary of interfaces with NAT66 feature

nat66_static_mapping_dump()¶: Dump NAT66 static mappings :return: Dictionary of NAT66 static mappings

nat_det_add_del_map(in_addr, in_plen, out_addr, out_plen, is_add=1)¶

Add/delete deterministic NAT mapping

:param is_add - 1 if add, 0 if delete :param in_addr - inside IP address :param in_plen - inside IP address prefix length :param out_addr - outside IP address :param out_plen - outside IP address prefix length

nat_det_close_session_in(in_addr, in_port, ext_addr, ext_port)¶

Close deterministic NAT session using inside address and port

:param in_addr - inside IP address :param in_port - inside port :param ext_addr - external host IP address :param ext_port - external host port

nat_det_close_session_out(out_addr, out_port, ext_addr, ext_port)¶

Close deterministic NAT session using outside address and port

:param out_addr - outside IP address :param out_port - outside port :param ext_addr - external host IP address :param ext_port - external host port

nat_det_forward(in_addr)¶

Get outside address and port range from inside address

:param in_addr - inside IP address

nat_det_map_dump()¶

Dump deterministic NAT mappings

Returns:	Dictionary of deterministic NAT mappings

nat_det_reverse(out_addr, out_port)¶

Get inside address from outside address and port

:param out_addr - outside IP address :param out_port - outside port

nat_det_session_dump(user_addr)¶

Dump deterministic NAT sessions belonging to a user

:param user_addr - inside IP address of the user :return: Dictionary of deterministic NAT sessions

nat_get_addr_and_port_alloc_alg()¶: Get address and port assignment algorithm

nat_get_mss_clamping()¶: Get TCP MSS rewriting configuration

nat_get_reass()¶

Get NAT virtual fragmentation reassembly configuration

Returns:	NAT virtual fragmentation reassembly configuration

nat_get_timeouts()¶

Get values of timeouts for NAT sessions

Returns:	Timeouts for NAT sessions (in seconds)

nat_ipfix(domain_id=1, src_port=4739, enable=1)¶

Enable/disable NAT IPFIX logging

Parameters:	domain_id – Observation domain ID (Default value = 1) src_port – Source port number (Default value = 4739) enable – 1 if enable, 0 if disable (Default value = 1)

nat_reass_dump()¶

Dump NAT virtual fragmentation reassemblies

Returns:	Dictionary of NAT virtual fragmentation reassemblies

nat_set_addr_and_port_alloc_alg(alg=0, psid_offset=0, psid_length=0, psid=0, start_port=0, end_port=0)¶

Set address and port assignment algorithm

Parameters:	alg – algorithm: 0 - default, 1 - MAP-E, 2 - port range psid_offset – number of offset bits (valid only for MAP-E alg) psid_length – length of PSID (valid only for MAP-E alg) psid – Port Set Identifier value (valid only for MAP-E alg) start_port – beginning of the port range end_port – end of the port range

nat_set_mss_clamping(enable=0, mss_value=1500)¶

Set TCP MSS rewriting configuration

Parameters:	enable – disable(0)/enable(1) MSS rewriting feature mss_value – MSS value to be used for MSS rewriting

nat_set_reass(timeout=2, max_reass=1024, max_frag=5, drop_frag=0, is_ip6=0)¶

Set NAT virtual fragmentation reassembly

Parameters:	timeout – reassembly timeout (Default 2sec) max_reass – maximum concurrent reassemblies (Default 1024) max_frag – maximum fragmets per reassembly (Default 5) drop_frag – if 0 translate fragments, otherwise drop fragments is_ip6 – 1 if IPv6, 0 if IPv4

nat_set_timeouts(udp=300, tcp_established=7440, tcp_transitory=240, icmp=60)¶

Set values of timeouts for NAT sessions (in seconds)

:param udp - UDP timeout (Default value = 300) :param tcp_established - TCP established timeout (Default value = 7440) :param tcp_transitory - TCP transitory timeout (Default value = 240) :param icmp - ICMP timeout (Default value = 60)

nat_show_config()¶: Show NAT plugin config :return: NAT plugin config parameters

output_acl_set_interface(is_add, sw_if_index, ip4_table_index=4294967295, ip6_table_index=4294967295, l2_table_index=4294967295)¶

Parameters:	is_add – sw_if_index – ip4_table_index – (Default value = 0xFFFFFFFF) ip6_table_index – (Default value = 0xFFFFFFFF) l2_table_index – (Default value = 0xFFFFFFFF)

pg_create_interface(pg_index)¶

Parameters:	pg_index –

pipe_create(is_specified, user_instance)¶

pipe_delete(parent_sw_if_index)¶

pipe_dump()¶

policer_add_del(name, cir, eir, cb, eb, is_add=1, rate_type=0, round_type=0, ptype=0, color_aware=0, conform_action_type=1, conform_dscp=0, exceed_action_type=0, exceed_dscp=0, violate_action_type=0, violate_dscp=0)¶

ppcli(cli)¶

Helper method to print CLI command in case of info logging level.

Parameters:	cli – CLI to execute
Returns:	CLI output

pppoe_add_del_session(client_ip, client_mac, session_id=0, is_add=1, is_ipv6=0, decap_vrf_id=0)¶

Parameters:	is_add – (Default value = 1) is_ipv6 – (Default value = 0) client_ip – session_id – (Default value = 0) client_mac – decap_vrf_id – (Default value = 0)

proxy_arp_add_del(low_address, hi_address, vrf_id=0, is_add=1)¶

Config Proxy Arp Range.

Parameters:	low_address – Start address in the rnage to Proxy for hi_address – End address in the rnage to Proxy for vrf_id – The VRF/table in which to proxy

proxy_arp_intfc_enable_disable(sw_if_index, is_enable=1)¶

Enable/Disable an interface for proxy ARP requests

Parameters:	sw_if_index – Interface enable_disable – Enable/Disable

punt_socket_register(l4_port, pathname, header_version=1, is_ip4=1, l4_protocol=17)¶: Punt to socket

qos_egress_map_delete(id)¶: QOS egress map delete

qos_egress_map_update(id, outputs)¶: QOS egress map update

qos_mark_enable_disable(sw_if_index, output_source, map_id, enable)¶: QOS Mark Enable/Disable

qos_record_enable_disable(sw_if_index, input_source, enable)¶: IP QoS recording Enble/Disable

register_hook(hook)¶

Replace hook registration with new hook

Parameters:	hook –

reset_fib(vrf_id, is_ipv6=0)¶

Reset VRF (remove all routes etc.) request.

Parameters:	vrf_id (int) – ID of the FIB table / VRF to reset. is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

reset_vrf(vrf_id, is_ipv6=0)¶

Reset VRF (remove all routes etc.) request.

Parameters:	vrf_id (int) – ID of the FIB table / VRF to reset. is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

session_enable_disable(is_enabled)¶

set_ip_flow_hash(table_id, src=1, dst=1, sport=1, dport=1, proto=1, reverse=0, is_ip6=0)¶

set_ipfix_exporter(collector_address, src_address, path_mtu, template_interval, vrf_id=0, collector_port=4739, udp_checksum=0)¶

show_version()¶

sr_localsid_add_del(localsid, behavior, nh_addr4, nh_addr6, is_del=0, end_psp=0, sw_if_index=4294967295, vlan_index=0, fib_table=0)¶

Add/del IPv6 SR local-SID.

Parameters:	localsid – behavior – END=1; END.X=2; END.DX2=4; END.DX6=5; behavior – END.DX4=6; END.DT6=7; END.DT4=8 nh_addr4 – nh_addr6 – is_del – (Default value = 0) end_psp – (Default value = 0) sw_if_index – (Default value = 0xFFFFFFFF) vlan_index – (Default value = 0) fib_table – (Default value = 0)

sr_mpls_policy_add(bsid, weight, type, segments)¶

sr_mpls_policy_del(bsid)¶

sr_policy_add(bsid_addr, weight=1, is_encap=1, type=0, fib_table=0, n_segments=0, segments=[])¶

Parameters:

bsid_addr – bindingSID of the SR Policy
weight – weight of the sid list. optional. (default: 1)
is_encap – (bool) whether SR policy should Encap or SRH insert (default: Encap)
type – type/behavior of the SR policy. (default or spray) (default: default)
fib_table – VRF where to install the FIB entry for the BSID (default: 0)
n_segments – number of segments (default: 0)
segments – a vector of IPv6 address composing the segment list (default: [])

sr_policy_del(bsid_addr, sr_policy_index=0)¶

Parameters:	bsid – bindingSID of the SR Policy sr_policy_index – index of the sr policy (default: 0)

sr_steering_add_del(is_del, bsid_addr, sr_policy_index, table_id, prefix_addr, mask_width, sw_if_index, traffic_type)¶

Steer traffic L2 and L3 traffic through a given SR policy

Parameters:

is_del – delete or add
bsid_addr – bindingSID of the SR Policy (alt to sr_policy_index)
sr_policy – is the index of the SR Policy (alt to bsid)
table_id – is the VRF where to install the FIB entry for the BSID
prefix_addr – is the IPv4/v6 address for L3 traffic type
mask_width – is the mask for L3 traffic type
sw_if_index – is the incoming interface for L2 traffic
traffic_type – type of traffic (IPv4: 4, IPv6: 6, L2: 2)

svs_dump()¶

svs_enable_disable(af, table_id, sw_if_index, is_enable=1)¶

svs_route_add_del(table_id, prefix, src_table_id, is_add=1)¶

svs_table_add_del(af, table_id, is_add=1)¶

sw_interface_add_del_address(sw_if_index, addr, addr_len, is_ipv6=0, is_add=1, del_all=0)¶

Parameters:	addr – param is_ipv6: (Default value = 0) sw_if_index – addr_len – is_ipv6 – (Default value = 0) is_add – (Default value = 1) del_all – (Default value = 0)

sw_interface_bond_dump()¶

sw_interface_dump(filter=None)¶

Parameters:	filter – (Default value = None)

sw_interface_enable_disable_mpls(sw_if_index, is_enable=1)¶: Enable/Disable MPLS on the interface :param sw_if_index: :param is_enable: (Default value = 1)

sw_interface_ra_suppress(sw_if_index, suppress=1)¶

sw_interface_set_flags(sw_if_index, admin_up_down)¶

Parameters:	admin_up_down – sw_if_index –

sw_interface_set_ip_directed_broadcast(sw_if_index, enable=1)¶: IP Directed broadcast :param sw_if_index - interface the operation is applied to

sw_interface_set_l2_bridge(sw_if_index, bd_id, shg=0, port_type=0, enable=1)¶

Add/remove interface to/from bridge domain.

Parameters:	sw_if_index (int) – Software interface index of the interface. bd_id (int) – Bridge domain index. shg (int) – Split-horizon group index. (Default value = 0) bvi (int) – Set interface as a bridge group virtual interface. (Default value = 0) enable (int) – Add or remove interface. (Default value = 1)

sw_interface_set_l2_emulation(sw_if_index, enable=1)¶: L2 Emulation :param sw_if_index - interface the operation is applied to

sw_interface_set_l2_tag_rewrite(sw_if_index, vtr_oper, push=0, tag1=0, tag2=0)¶: L2 interface vlan tag rewrite configure request :param client_index - opaque cookie to identify the sender :param context - sender context, to match reply w/ request :param sw_if_index - interface the operation is applied to :param vtr_op - Choose from l2_vtr_op_t enum values :param push_dot1q - first pushed flag dot1q id set, else dot1ad :param tag1 - Needed for any push or translate vtr op :param tag2 - Needed for any push 2 or translate x-2 vtr ops

sw_interface_set_l2_xconnect(rx_sw_if_index, tx_sw_if_index, enable)¶

Create or delete unidirectional cross-connect from Tx interface to Rx interface.

Parameters:	rx_sw_if_index (int) – Software interface index of Rx interface. tx_sw_if_index (int) – Software interface index of Tx interface. enable (int) – Create cross-connect if equal to 1, delete cross-connect if equal to 0.

sw_interface_set_mac_address(sw_if_index, mac)¶

sw_interface_set_mtu(sw_if_index, mtu=[0, 0, 0, 0])¶

Parameters:	sw_if_index – mtu –

sw_interface_set_promiscuous(sw_if_index, enable)¶

Parameters:	sw_if_index – enable –

sw_interface_set_table(sw_if_index, is_ipv6, table_id)¶

Set the IPvX Table-id for the Interface

Parameters:	sw_if_index – is_ipv6 – table_id –

sw_interface_set_unnumbered(sw_if_index, ip_sw_if_index, is_add=1)¶

Set the Interface to be unnumbered

Parameters:	is_add – (Default value = 1)

:param sw_if_index - interface That will be unnumbered :param ip_sw_if_index - interface with an IP addres

sw_interface_slave_dump(sw_if_index)¶

Parameters:	sw_if_index – bond sw_if_index

sw_interface_span_enable_disable(sw_if_index_from, sw_if_index_to, state=1, is_l2=0)¶

Parameters:	sw_if_index_from – sw_if_index_to – state – is_l2 –

sw_interface_vhost_user_dump()¶

udp_encap_add(src_ip, dst_ip, src_port, dst_port, table_id=0)¶: Add a GRE tunnel :param src_ip: :param dst_ip: :param src_port: :param dst_port: :param outer_fib_id: (Default value = 0)

udp_encap_del(id)¶

udp_encap_dump()¶

vxlan_add_del_tunnel(src_addr, dst_addr, mcast_sw_if_index=4294967295, is_add=1, is_ipv6=0, encap_vrf_id=0, decap_next_index=4294967295, vni=0, instance=4294967295)¶

Parameters:	dst_addr – src_addr – is_add – (Default value = 1) is_ipv6 – (Default value = 0) encap_vrf_id – (Default value = 0) decap_next_index – (Default value = 0xFFFFFFFF) mcast_sw_if_index – (Default value = 0xFFFFFFFF) vni – (Default value = 0) instance – (Default value = 0xFFFFFFFF)

vxlan_gbp_tunnel_add_del(src, dst, mcast_sw_if_index=4294967295, is_add=1, is_ipv6=0, encap_table_id=0, decap_next_index=4294967295, vni=0, instance=4294967295)¶

Parameters:	dst_addr – src_addr – is_add – (Default value = 1) is_ipv6 – (Default value = 0) encap_table_id – (Default value = 0) decap_next_index – (Default value = 0xFFFFFFFF) mcast_sw_if_index – (Default value = 0xFFFFFFFF) vni – (Default value = 0) instance – (Default value = 0xFFFFFFFF)

vxlan_gbp_tunnel_dump(sw_if_index=4294967295)¶

vxlan_gpe_add_del_tunnel(src_addr, dst_addr, mcast_sw_if_index=4294967295, is_add=1, is_ipv6=0, encap_vrf_id=0, decap_vrf_id=0, protocol=3, vni=0)¶

Parameters:	local – remote – is_add – (Default value = 1) is_ipv6 – (Default value = 0) encap_vrf_id – (Default value = 0) decap_vrf_id – (Default value = 0) mcast_sw_if_index – (Default value = 0xFFFFFFFF) protocol – (Default value = 3) vni – (Default value = 0)

wait_for_event(timeout, name=None)¶: Wait for and return next event.

want_bfd_events(enable_disable=1)¶

want_dhcp6_pd_reply_events(enable_disable=1)¶

want_dhcp6_reply_events(enable_disable=1)¶

want_igmp_events(enable=1)¶

want_interface_events(enable_disable=1)¶

want_ip4_arp_events(enable_disable=1, address=0)¶

want_ip6_nd_events(enable_disable=1, address=0)¶

want_ip6_ra_events(enable_disable=1)¶

want_macs_learn_events(enable_disable=1, scan_delay=0, max_macs_in_event=0, learn_limit=0)¶

want_udp_encap_stats(enable=1)¶