2.100. vpp_interface module¶

class vpp_interface.VppInterface(test)¶

Bases: object

Generic VPP interface.

add_sub_if(sub_if)¶

Register a sub-interface with this interface.

Parameters:	sub_if – sub-interface

admin_down()¶: Put interface ADMIN-down.

admin_up()¶: Put interface ADMIN-UP.

assert_interface_state(admin_up_down, link_up_down, expect_event=False)¶

config_ip4()¶: Configure IPv4 address on the VPP interface.

config_ip6()¶: Configure IPv6 address on the VPP interface.

configure_ipv4_neighbors()¶

For every remote host assign neighbor’s MAC to IPv4 addresses.

Parameters:	vrf_id – The FIB table / VRF ID. (Default value = 0)

configure_ipv6_neighbors()¶

For every remote host assign neighbor’s MAC to IPv6 addresses.

Parameters:	vrf_id – The FIB table / VRF ID. (Default value = 0)

disable_ipv6_ra()¶: Configure IPv6 RA suppress on the VPP interface.

disable_mpls()¶: Enable MPLS on the VPP interface.

dump¶: RAW result of sw_interface_dump for this interface.

enable_mpls()¶: Enable MPLS on the VPP interface.

generate_remote_hosts(count=1)¶

Generate and add remote hosts for the interface.

Parameters:	count (int) – Number of generated remote hosts.

get_interface_config_from_dump(dump)¶

host_by_ip4(ip)¶

Parameters:	ip – IPv4 address to find host by.
Returns:	Host object assigned to interface.

host_by_ip6(ip)¶

Parameters:	ip – IPv6 address to find host by.
Returns:	Host object assigned to interface.

host_by_mac(mac)¶

Parameters:	mac – MAC address to find host by.
Returns:	Host object assigned to interface.

ip6_disable()¶: Put interface ADMIN-DOWN.

ip6_enable()¶: IPv6 Enable interface

ip6_ra_config(no=0, suppress=0, send_unicast=0)¶: Configure IPv6 RA suppress on the VPP interface.

ip6_ra_prefix(address, address_length, is_no=0, off_link=0, no_autoconfig=0, use_default=0)¶: Configure IPv6 RA suppress on the VPP interface.

is_interface_config_in_dump(dump)¶

is_ip4_entry_in_fib_dump(dump)¶

local_addr¶

local_addr_n¶

local_ip4¶: Local IPv4 address on VPP interface (string).

local_ip4n¶: Local IPv4 address - raw, suitable as API parameter.

local_ip6¶: Local IPv6 address on VPP interface (string).

local_ip6_ll¶: Local IPv6 link-local address on VPP interface (string).

local_ip6n¶: Local IPv6 address - raw, suitable as API parameter.

local_ip6n_ll¶: Local IPv6 link-local address - raw, suitable as API parameter.

local_mac¶: MAC-address of the VPP interface.

name¶: Name of the interface.

query_vpp_config()¶

remote_addr¶

remote_addr_n¶

remote_hosts¶: Remote hosts list

remote_ip4¶: IPv4 address of remote peer “connected” to this interface.

remote_ip4n¶: IPv4 address of remote peer - raw, suitable as API parameter.

remote_ip6¶: IPv6 address of remote peer “connected” to this interface.

remote_ip6_ll¶: Link-local IPv6 address of remote peer “connected” to this interface.

remote_ip6n¶: IPv6 address of remote peer - raw, suitable as API parameter

remote_ip6n_ll¶: Link-local IPv6 address of remote peer - raw, suitable as API parameter

remote_mac¶: MAC-address of the remote interface “connected” to this interface

set_mac(mac)¶

set_proxy_arp(enable=1)¶: Set the interface to enable/disable Proxy ARP

set_sw_if_index(sw_if_index)¶

set_table_ip4(table_id)¶: Set the interface in a IPv4 Table.

Note

Must be called before configuring IP4 addresses.

set_table_ip6(table_id)¶: Set the interface in a IPv6 Table.

Note

Must be called before configuring IP6 addresses.

set_unnumbered(ip_sw_if_index)¶: Set the interface to unnumbered via ip_sw_if_index

sw_if_index¶: Interface index assigned by VPP.

test¶: Test case creating this interface.

unconfig()¶: Unconfigure IPv6 and IPv4 address on the VPP interface.

unconfig_ip4()¶: Remove IPv4 address on the VPP interface.

unconfig_ip6()¶: Remove IPv6 address on the VPP interface.

unset_unnumbered(ip_sw_if_index)¶: Unset the interface to unnumbered via ip_sw_if_index