3n-tsh-x520¶

10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  3.87       4.27 
 2.  3.91       4.32 
  
 3.   26   35   41        25   41   54  
 4.   49   79   97        62   80   96  
 5.  141  166  186       154  173  199

 78b-2t2c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  4.62       5.10 
 2.  4.62       5.10 
  
 3.   24   30   34        24   30   41  
 4.   64   73   82        54   65   74  
 5.   95  123  138       100  131  145

 78b-4t4c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  6.05       6.68 
 2.  6.11       6.75 
  
 3.   24   35   42        25   35   43  
 4.   48   68   79        48   62   79  
 5.   95  137  164       100  147  171

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  3.31       4.72 
 2.  3.33       4.74 
  
 3.   25   41   58        25   49   58  
 4.   64   93  116        59  109  123  
 5.  146  170  189       151  175  199

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  4.91       6.99 
 2.  4.98       7.09 
  
 3.   25   39   44        25   39   54  
 4.   45   58   74        46   61   73  
 5.   93  138  162        98  146  167

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  3.51       5.00 
 2.  3.53       5.02 
  
 3.   28   62   84        28   38   45  
 4.   71  118  137        74  119  144  
 5.  148  175  195       161  186  203

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  4.26       6.07 
 2.  4.28       6.10 
  
 3.   25   49   64        25   39   53  
 4.   54   86  111        42   66   80  
 5.  109  148  163       123  160  178

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  5.27       7.50 
 2.  5.35       7.62 
  
 3.   24   61   79        25   44   59  
 4.   45   68   81        50   62   73  
 5.   93  139  162       102  150  171

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  2.46       3.82 
 2.  2.47       3.84 
  
 3.   34   69   83        34   58   74  
 4.   91  168  194        92  140  162  
 5.  301  355  373       354  374  402

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  0.04       0.07 
 2.  2.83       4.39 
  
 3.   33   42   64        34   57   77  
 4.   55  125  154        66  125  143  
 5.  284  323  369       282  376  393

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  4.38       6.80 
 2.  4.43       6.87 
  
 3.   34   66  113        34   48   90  
 4.   48   58  154       100  141  188  
 5.  215  250  320       220  266  349

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  2.68       4.16 
 2.  2.71       4.20 
  
 3.   34   72   91        35   85  105  
 4.   87  165  182        93  134  173  
 5.  340  375  410       347  384  425

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  3.10       4.81 
 2.  3.11       4.83 
  
 3.   34   86  104        34   77   99  
 4.   97  144  157        80  106  123  
 5.  284  343  369       271  338  365

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  4.90       7.61 
 2.  4.98       7.73 
  
 3.   37   92  140        35   87  129  
 4.  107  148  181        84  127  171  
 5.  213  268  325       228  287  344

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  2.58       4.00 
 2.  2.60       4.04

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  2.95       4.57 
 2.  2.96       4.60

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  4.53       7.03 
 2.  4.57       7.10