3n-skx-xxv710¶

25ge2p1xxv710-avf-ethip6ip6-ip6base-srv6enc1sid-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-2t1c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr

 1.  9.00       9.93 
 2. 12.46      13.76 
  
 3.   20   29   37        18   31   39  
 4.   39   50   55        40   50   56  
 5.   95  108  119        97  110  119

 78b-4t2c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr

 1. 18.09      19.98 
 2. 24.34      26.87 
  
 3.   27   38   48        27   39   49  
 4.   40   46   52        40   46   52  
 5.   92  105  114        92  104  114

 78b-8t4c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr

 1. 34.20      37.76 
 2. 36.89      40.73 
  
 3.   21   28   34        23   30   35  
 4.   36   42   49        37   43   50  
 5.   61   79   99        61   80  101

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-2t1c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr

 1.  8.41      11.97 
 2. 10.34      14.72 
  
 3.   18   25   31        18   26   34  
 4.   41   52   60        41   53   60  
 5.  104  117  129       106  121  130

 78b-4t2c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr

 1. 17.29      24.62 
 2. 20.50      29.20 
  
 3.   21   33   43        23   35   47  
 4.   42   51   58        43   52   58  
 5.  105  120  131       109  124  135

 78b-8t4c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr

 1. 32.08      45.68 
 2. 34.41      49.00 
  
 3.   22   29   35        22   30   36  
 4.   41   47   54        41   47   54  
 5.   75  110  142        77  111  143

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  9.03      12.85 
 2. 11.20      15.95 
  
 3.   23   31   37        21   29   36  
 4.   37   50   58        37   51   62  
 5.  101  114  125       100  114  124

 78b-4t2c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1. 17.33      24.68 
 2. 21.56      30.70 
  
 3.   19   29   40        21   32   39  
 4.   41   48   54        40   47   53  
 5.   95  107  116        94  106  116

 78b-8t4c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1. 31.28      44.54 
 2. 31.59      44.98 
  
 3.   22   30   36        23   30   35  
 4.   37   43   49        36   42   48  
 5.   62   76   92        60   73   91

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  6.64      10.30 
 2.  6.67      10.35 
  
 3.   22   27   35        22   28   52  
 4.   47   64   76        46   73   83  
 5.  155  220  242       149  168  212

 78b-4t2c-avf-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1. 11.79      18.30 
 2. 12.27      19.05 
  
 3.   24   32   51        30   47   58  
 4.   51   55   58        53   62   65  
 5.  223  250  260       222  242  256

 78b-8t4c-avf-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1. 15.16      23.53 
 2. 15.39      23.89

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  7.03      10.91 
 2.  7.54      11.71 
  
 3.   22   27   41        21   25   34  
 4.   54   67   81        50   73   82  
 5.  189  210  222       184  206  218

 78b-4t2c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1. 13.88      21.54 
 2. 15.04      23.34 
  
 3.   27   38   48        25   40   46  
 4.   66   74   82        65   74   81  
 5.  185  206  222       182  206  225

 78b-8t4c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1. 23.31      36.18 
 2. 23.67      36.73 
  
 3.   34   42   49        26   32   39  
 4.   59   70   79        50   59   68  
 5.  130  172  196       123  153  188

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  7.10      11.01 
 2.  7.17      11.12

 78b-4t2c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1. 13.57      21.06 
 2. 13.64      21.17

 78b-8t4c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1. 21.65      33.60 
 2. 22.20      34.45