2n-zn2-cx556a

2n1l-100ge2p1cx556a-rdma-dot1q-ip4base-ndrpdr

RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 dot1q-ip4base-ndrpdr 

 1. 16.52      11.63 
 2. 17.11      12.05 
  
 3.   25   62  105        28   50   81  
 4.   19   29   37        18   25   33  
 5.   42   49   57        49   58   67  

 64b-4t2c-rdma- 
 dot1q-ip4base-ndrpdr 

 1. 23.70      16.68 
 2. 26.72      18.81 
  
 3.   21   39   54        22   38   53  
 4.   14   25   27        13   25   26  
 5.   29   35   41        30   36   42  

 64b-8t4c-rdma- 
 dot1q-ip4base-ndrpdr 

 1. 24.63      17.34 
 2. 25.90      18.23 
  
 3.   32   69   85        41   81   96  
 4.   13   23   25        12   22   25  
 5.   25   27   30        22   27   30

2n1l-100ge2p1cx556a-rdma-ethip4-ip4base-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4base-ndrpdr 

 1. 15.31      10.29 
 2. 17.80      11.96 
  
 3.   26   61  113        28   64   87  
 4.   15   26   35        16   25   32  
 5.   35   43   48        36   44   49  

 64b-4t2c-rdma- 
 ethip4-ip4base-ndrpdr 

 1. 24.94      16.76 
 2. 26.89      18.07 
  
 3.   26   75   96        36   81   96  
 4.   15   21   25        14   21   25  
 5.   27   32   38        27   32   38  

 64b-8t4c-rdma- 
 ethip4-ip4base-ndrpdr 

 1. 24.28      16.32 
 2. 26.05      17.50 
  
 3.   16   32   50        25   60   75  
 4.   12   19   24        12   17   24  
 5.   22   28   35        21   27   34

2n1l-100ge2p1cx556a-rdma-ethip4-ip4scale200k-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4scale200k-ndrpdr 

 1. 15.47      10.40 
 2. 16.18      10.87 
  
 3.   33   59   84        34   77   94  
 4.   20   27   38        21   36   43  
 5.   51   63   73        48   58   69  

 64b-4t2c-rdma- 
 ethip4-ip4scale200k-ndrpdr 

 1. 25.76      17.31 
 2. 27.22      18.29 
  
 3.   36   67   85        23   56   73  
 4.   16   23   28        16   23   29  
 5.   41   48   58        40   48   56  

 64b-8t4c-rdma- 
 ethip4-ip4scale200k-ndrpdr 

 1. 24.46      16.43 
 2. 25.71      17.28 
  
 3.   26   59   75        21   40   56  
 4.   21   24   26        20   25   27  
 5.   26   32   40        24   30   39

2n1l-100ge2p1cx556a-rdma-ethip4-ip4scale200k-rnd-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 100K flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4scale200k-rnd-ndrpdr 

 1.  9.40       6.32 
 2. 13.51       9.08 
  
 3.   51  113  165        53  115  128  
 4.   20   30   37        20   31   39  
 5.   38   45   52        39   48   56  

 64b-4t2c-rdma- 
 ethip4-ip4scale200k-rnd-ndrpdr 

 1. 25.03      16.82 
 2. 25.28      16.99 
  
 3.   23   38   64        21   42   57  
 4.   17   23   28        16   23   30  
 5.   50   60   74        50   59   75  

 64b-8t4c-rdma- 
 ethip4-ip4scale200k-rnd-ndrpdr 

 1. 25.52      17.15 
 2. 26.17      17.59 
  
 3.   21   44   63        29   59   71  
 4.   21   25   27        13   24   26  
 5.   22   28   34        23   28   35

2n1l-100ge2p1cx556a-rdma-ethip4-ip4scale20k-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4scale20k-ndrpdr 

 1. 16.82      11.31 
 2. 17.42      11.71 
  
 3.   52  117  126        45   81  118  
 4.   24   36   41        19   33   39  
 5.   38   45   52        37   44   51  

 64b-4t2c-rdma- 
 ethip4-ip4scale20k-ndrpdr 

 1. 23.42      15.74 
 2. 26.68      17.93 
  
 3.   22   51   68        28   57   73  
 4.   15   21   25        15   22   25  
 5.   27   33   39        28   34   39  

 64b-8t4c-rdma- 
 ethip4-ip4scale20k-ndrpdr 

 1. 23.80      15.99 
 2. 26.18      17.59 
  
 3.   51   88  101        39   85   99  
 4.   14   22   25        14   23   30  
 5.   22   28   33        21   27   33

2n1l-100ge2p1cx556a-rdma-ethip4-ip4scale20k-rnd-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 10K flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4scale20k-rnd-ndrpdr 

 1. 11.59       7.79 
 2. 16.72      11.23 
  
 3.   22   94  115        35   75   97  
 4.   20   25   37        13   26   36  
 5.   38   44   51        37   43   49  

 64b-4t2c-rdma- 
 ethip4-ip4scale20k-rnd-ndrpdr 

 1. 24.89      16.73 
 2. 26.84      18.03 
  
 3.   26   63   81        23   50   62  
 4.   15   22   25        15   21   24  
 5.   30   37   42        29   36   42  

 64b-8t4c-rdma- 
 ethip4-ip4scale20k-rnd-ndrpdr 

 1. 24.68      16.59 
 2. 26.08      17.53 
  
 3.   37   84  101        47   90  102  
 4.   12   23   25        13   23   25  
 5.   20   26   31        20   26   31

2n1l-100ge2p1cx556a-rdma-ethip4-ip4scale2m-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4scale2m-ndrpdr 

 1. 14.24       9.57 
 2. 15.43      10.37 
  
 3.   32   93  143        25   81  118  
 4.   21   33   40        21   35   40  
 5.   42   49   56        42   51   59  

 64b-4t2c-rdma- 
 ethip4-ip4scale2m-ndrpdr 

 1. 24.13      16.21 
 2. 26.94      18.10 
  
 3.   18   45   62        24   59   74  
 4.   20   23   26        19   23   34  
 5.   42   50   60        40   48   58  

 64b-8t4c-rdma- 
 ethip4-ip4scale2m-ndrpdr 

 1. 23.41      15.73 
 2. 25.49      17.13 
  
 3.   23   42   56        22   61   77  
 4.   15   23   26        13   21   27  
 5.   22   27   33        22   28   33

2n1l-100ge2p1cx556a-rdma-ethip4-ip4scale2m-rnd-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma- 
 ethip4-ip4scale2m-rnd-ndrpdr 

 1.  9.84       6.61 
 2. 10.14       6.81 
  
 3.   72  121  186       117  122  215  
 4.   25   45   58        39   58   67  
 5.   42   57   65        47   61   68  

 64b-4t2c-rdma- 
 ethip4-ip4scale2m-rnd-ndrpdr 

 1. 12.05       8.10 
 2. 19.59      13.16 
  
 3.   23   41  103        36   68   89  
 4.   18   25   34        17   25   34  
 5.   55   70   91        56   70   92  

 64b-8t4c-rdma- 
 ethip4-ip4scale2m-rnd-ndrpdr 

 1. 25.30      17.00 
 2. 26.74      17.97 
  
 3.   19   41   68        19   39   52  
 4.   17   24   30        15   23   28  
 5.   29   37   45        29   37   45

2n1l-100ge2p1cx556a-rdma-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma-ethip4udp- 
 ip4base-iacl50sf-10kflows-ndrpdr 

 1.  9.78       6.57 
 2. 11.31       7.60 
  
 3.   21   37  123        39  110  123  
 4.   21   32   40        19   35   44  
 5.   41   53   61        40   49   57  

 64b-4t2c-rdma-ethip4udp- 
 ip4base-iacl50sf-10kflows-ndrpdr 

 1. 18.34      12.32 
 2. 22.08      14.83 
  
 3.   21   37   51        29   97  115  
 4.   18   25   31        18   28   37  
 5.   50   60   70        48   56   69  

 64b-8t4c-rdma-ethip4udp- 
 ip4base-iacl50sf-10kflows-ndrpdr 

 1.  1.63       1.09 
 2. 26.41      17.74 
  
 3.   30   76   90        21   54   96  
 4.   18   23   29        18   24   31  
 5.   44   53   59        45   53   59

2n1l-100ge2p1cx556a-rdma-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma-ethip4udp- 
 ip4base-iacl50sl-10kflows-ndrpdr 

 1.  7.59       5.10 
 2.  9.46       6.36 
  
 3.   45  114  178        67  114  128  
 4.   39   54   61        34   54   64  
 5.   40   50   58        42   58   68  

 64b-4t2c-rdma-ethip4udp- 
 ip4base-iacl50sl-10kflows-ndrpdr 

 1.  1.98       1.33 
 2. 18.01      12.11 
  
 3.   25   52   65        29   65   96  
 4.   20   26   35        20   31   36  
 5.   59   85  107        55   78   96  

 64b-8t4c-rdma-ethip4udp- 
 ip4base-iacl50sl-10kflows-ndrpdr 

 1.  9.07       6.10 
 2. 18.17      12.21 
  
 3.   44   97  132        66  123  146  
 4.   19   28   35        26   32   36  
 5.   40   81  154        40   84  231

2n1l-100ge2p1cx556a-rdma-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma-ethip4udp- 
 ip4base-oacl50sf-10kflows-ndrpdr 

 1.  2.89       1.94 
 2. 11.08       7.45 
  
 3.   30  113  125        38   70  102  
 4.   22   40   52        21   39   50  
 5.   42   52   63        45   57   69  

 64b-4t2c-rdma-ethip4udp- 
 ip4base-oacl50sf-10kflows-ndrpdr 

 1.  0.17       0.11 
 2. 21.72      14.60 
  
 3.   38   77  105        21   37   45  
 4.   19   25   34        19   27   36  
 5.   55   67   73        56   67   74  

 64b-8t4c-rdma-ethip4udp- 
 ip4base-oacl50sf-10kflows-ndrpdr 

 1. 23.95      16.10 
 2. 25.84      17.36 
  
 3.   23   46   83        24   54   92  
 4.   19   25   34        17   24   31  
 5.   47   55   64        50   58   66

2n1l-100ge2p1cx556a-rdma-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma-ethip4udp- 
 ip4base-oacl50sl-10kflows-ndrpdr 

 1.  8.33       5.60 
 2.  9.25       6.22 
  
 3.   27  116  131        47  113  130  
 4.   59   68   75        18   36   50  
 5.   42   57   69        42   56   70  

 64b-4t2c-rdma-ethip4udp- 
 ip4base-oacl50sl-10kflows-ndrpdr 

 1. 10.01       6.73 
 2. 18.32      12.31 
  
 3.   39   94  128        37   68   88  
 4.   15   26   37        17   26   35  
 5.   78  121  162        74  111  144  

 64b-8t4c-rdma-ethip4udp- 
 ip4base-oacl50sl-10kflows-ndrpdr 

 1. 11.19       7.52 
 2. 16.93      11.37 
  
 3.   35   68  121        46   95  149  
 4.   20   29   37        16   30   33  
 5.   33   52   78        32   53   82

2n1l-100ge2p1cx556a-rdma-ethip4udp-nat44det-h1-p1-s1-ndrpdr

RFC2544: Pkt throughput NAT44 deterministic mode performance test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1 flow per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma-ethip4udp- 
 nat44det-h1-p1-s1-ndrpdr 

 1. 11.69       7.85 
 2. 12.17       8.18 
  
 3.  105  198  220        83  138  166  
 4.   23   43   53        26   45   53  
 5.   49   60   69        55   66   77  

 64b-4t2c-rdma-ethip4udp- 
 nat44det-h1-p1-s1-ndrpdr 

 1.  9.99       6.71 
 2. 12.15       8.16 
  
 3.   47   82  125        73  116  128  
 4.   24   41   51        21   41   50  
 5.   49   59   70        55   66   75  

 64b-8t4c-rdma-ethip4udp- 
 nat44det-h1-p1-s1-ndrpdr 

 1. 11.80       7.93 
 2. 12.16       8.17 
  
 3.   55  105  125        27   40  121  
 4.   22   44   51        22   37   49  
 5.   49   60   70        55   66   78

2n1l-100ge2p1cx556a-rdma-ethip4udp-nat44det-h1024-p63-s64512-ndrpdr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /22 and IPv4 /24 route entries. DUT1 is tested with Mellanox-CX556A.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1 flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-rdma-ethip4udp- 
 nat44det-h1024-p63-s64512-ndrpdr 

 1.  1.70       1.14 
 2.  8.73       5.87 
  
 3.   54  118  168        57  114  119  
 4.   26   54   65        25   49   63  
 5.   60   98  137        28   41   52  

 64b-4t2c-rdma-ethip4udp- 
 nat44det-h1024-p63-s64512-ndrpdr 

 1.  3.90       2.62 
 2. 10.06       6.76 
  
 3.   72  152  199        68  119  172  
 4.   14   25   36        28   47   56  
 5.   20   28   35        60   72   82  

 64b-8t4c-rdma-ethip4udp- 
 nat44det-h1024-p63-s64512-ndrpdr 

 1.  8.02       5.39 
 2. 10.19       6.85 
  
 3.   70  118  152        45   85  118  
 4.   16   25   38        23   45   57  
 5.   13   30   36        64   76   84