3n-tsh-x520¶

10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  3.62       2.84 
 2.  3.69       2.89 
  
 3.   25   81  114        26   47  108  
 4.   48  133  152        54  136  155  
 5.  191  246  277       211  261  295

 78b-2t2c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  5.35       4.19 
 2.  5.37       4.21 
  
 3.   25   83  107        25   92  110  
 4.   74   90  112        72   90   99  
 5.  117  145  173       128  161  198

 78b-4t4c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  7.58       5.94 
 2.  7.58       5.94 
  
 3.   25   59   76        26   43   58  
 4.   35   74   88        41   76   99  
 5.   94  114  126        92  113  135

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  3.15       2.47 
 2.  3.17       2.48 
  
 3.   27   72  109        27   69  110  
 4.   71  135  164        67  140  175  
 5.  158  189  217       169  202  223

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  4.80       3.76 
 2.  4.97       3.90 
  
 3.   27   69   89        27   77   97  
 4.   68  118  138        72  118  134  
 5.  132  164  187       132  169  196

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  6.70       5.25 
 2.  6.83       5.36 
  
 3.   27   81  112        27   77  114  
 4.   52  102  115        60  104  114  
 5.  122  140  157       124  142  158

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  3.23       2.53 
 2.  3.35       2.62 
  
 3.   27   78  111        27   71  111  
 4.   52  147  158        56  143  161  
 5.  174  226  267       184  236  286

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  5.20       4.08 
 2.  5.20       4.08 
  
 3.   26  106  130        26  107  131  
 4.   60  119  136        60  125  141  
 5.  141  170  200       145  175  204

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  6.44       5.05 
 2.  7.26       5.69 
  
 3.   27   80   89        27   80   90  
 4.   65  109  119        67  108  119  
 5.  116  138  158       118  138  157

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  2.10       1.64 
 2.  2.37       1.86 
  
 3.   38   57   68        38   61   88  
 4.   82  215  247        84  221  265  
 5.  337  409  438       353  407  468

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  2.87       2.25 
 2.  3.14       2.46 
  
 3.   37   62   78        37   47  197  
 4.   73  184  219        62  185  248  
 5.  245  311  364       221  298  368

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  3.86       3.02 
 2.  3.91       3.07 
  
 3.   38   74   90        37   51  185  
 4.   68  127  170        64  162  214  
 5.  271  306  345       182  224  261

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  1.39       1.09 
 2.  2.57       2.01 
  
 3.   38   98  140        38   92  141  
 4.   95  169  191        89  169  190  
 5.  351  416  442       358  403  439

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  3.20       2.51 
 2.  3.23       2.53 
  
 3.   38  135  166        37  109  192  
 4.  102  173  199        92  187  252  
 5.  225  285  335       238  298  343

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  4.38       3.43 
 2.  4.44       3.48 
  
 3.   38   82  169        37   69  142  
 4.  111  164  190       100  183  235  
 5.  255  297  320       147  195  240

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  2.39       1.87 
 2.  2.46       1.93

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  3.12       2.45 
 2.  3.17       2.49

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  4.03       3.16 
 2.  4.11       3.22