3n-skx-xxv710

25ge2p1xxv710-avf-ethip6ip6-ip6base-srv6enc1sid-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr 

 2. 10.51       8.24 
  
 3.   24   58   71        23   61   80  
 4.   48   70   80        47   70   78  
 5.   71   85   92        68   82   90  

 1518b-2t1c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr 

 2.  3.86      47.52 
  
 3.   26   32   40        26   30   39  
 4.   29   47   50        27   47   49  
 5.   43   47   51        43   47   50  

 9000b-2t1c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr 

 2.  0.67      48.54 

 imix-2t1c-avf- 
 ethip6ip6-ip6base-srv6enc1sid-ndrpdr 

 2. 10.57      31.62

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr 

 2. 10.41       8.16 
  
 3.   25   79   97        24   80   97  
 4.   64   85   94        63   84   93  
 5.   90  106  117        92  106  115  

 1518b-2t1c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr 

 2.  3.77      46.34 
  
 3.   26   35   45        26   31   42  
 4.   29   50   52        34   49   52  
 5.   48   51   53        47   51   53  

 9000b-2t1c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr 

 2.  0.67      48.33 

 imix-2t1c-avf- 
 ethip6srhip6-ip6base-srv6enc2sids-ndrpdr 

 2. 10.38      31.03

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2. 10.49       8.22 
  
 3.   25   65   80        24   68   84  
 4.   58   83   92        57   84   91  
 5.   83   97  109        83   97  106  

 1518b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2.  3.77      46.34 
  
 3.   26   30   43        26   28   36  
 4.   29   50   53        35   50   52  
 5.   47   51   55        47   51   53  

 9000b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2.  0.67      48.33 

 imix-2t1c-avf-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2. 10.42      31.16

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  3.73      45.89 
  
 3.   30   33   39        31   39   52  
 4.   58   81   91        45   98  114  
 5.   67  166  177       283  301  313  

 9000b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  0.67      48.24 

 imix-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  4.90      14.65

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  4.97       3.90 
  
 3.   22   40   48        22   62   91  
 4.   53  103  119        62  121  141  
 5.  120  157  174       165  215  251  

 1518b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  3.73      45.89 
  
 3.   31   63   75        30   81   96  
 4.   85  109  115        86  126  137  
 5.  145  157  167       237  256  273  

 9000b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  0.67      48.24 

 imix-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  5.28      15.78

25ge2p1xxv710-avf-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  4.83       3.79 

 1518b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  3.73      45.89 

 9000b-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  0.67      48.24 

 imix-2t1c-avf-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  4.88      14.59

25ge2p1xxv710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr 

 2.  9.19       7.21 
  
 3.   17   64   82        17   61   82  
 4.   55   79   86        56   82   88  
 5.   81   91   99        78   92  103  

 1518b-2t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr 

 2.  3.86      47.52 
  
 3.   21   37   67        21   36   68  
 4.   32   49   68        38   48   68  
 5.   44   48   51        44   48   52  

 9000b-2t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr 

 2.  0.67      48.00 
  
 3.   37   51   81        36   47   81  
 4.   60   96  101        57   97  102  
 5.   95  127  134        95  128  134  

 imix-2t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr 

 2.  8.27      24.74

25ge2p1xxv710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr 

 2.  9.11       7.14 
  
 3.   18   57   97        18   50   96  
 4.   64   97  106        62   97  107  
 5.  104  115  125       104  115  124  

 1518b-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr 

 2.  3.77      46.34 
  
 3.   21   37   63        21   36   65  
 4.   47   52   65        46   52   66  
 5.   49   52   55        49   52   56  

 9000b-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr 

 2.  0.66      47.74 
  
 3.   38   51   62        36   51   64  
 4.   58   97  105        53   98  105  
 5.   99  132  139        98  132  138  

 imix-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr 

 2.  8.02      23.98

25ge2p1xxv710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2.  9.15       7.18 
  
 3.   18   69   96        18   62   91  
 4.   63   93  102        63   94  102  
 5.   97  109  120        89  106  119  

 1518b-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2.  3.77      46.34 
  
 3.   21   38   66        21   38   67  
 4.   47   53   65        46   52   70  
 5.   49   53   56        49   52   55  

 9000b-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2.  0.66      47.94 
  
 3.   38   49   84        36   49   83  
 4.   46  100  106        41   99  105  
 5.  100  134  141        99  133  139  

 imix-2t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr 

 2.  8.11      24.25

25ge2p1xxv710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  4.88       3.82 
  
 3.   22   22   23        21   22   22  
 4.   47  123  151        45  123  153  
 5.  221  249  276       222  250  279  

 1518b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  3.73      45.89 
  
 3.   26   79   92        25   83   97  
 4.   54  117  135        71  133  148  
 5.  248  273  322       253  289  352  

 9000b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  0.66      47.42 
  
 3.   45   55   76        44   51   93  
 4.   46  157  168        44  154  167  
 5.  149  215  235       135  211  221  

 imix-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr 

 2.  4.29      12.83

25ge2p1xxv710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  5.42       4.25 
  
 3.   22   74   97        21   86  109  
 4.   91  146  156        83  134  154  
 5.  181  211  239       174  205  230  

 1518b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  3.73      45.89 
  
 3.   26   76   90        25   77   94  
 4.   94  125  136        89  127  139  
 5.  213  239  285       215  245  299  

 9000b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  0.66      47.40 
  
 3.   45   62   74        43   60   75  
 4.   80  152  163        73  154  167  
 5.  151  199  215       151  196  213  

 imix-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr 

 2.  4.62      13.80

25ge2p1xxv710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 78b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  5.17       4.06 

 1518b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  3.73      45.89 

 9000b-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  0.66      47.41 

 imix-2t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr 

 2.  4.52      13.51