vm vhost¶
ip4¶
eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev¶
IPv4 routing test cases with vhost user interface
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for IPv4 routing on both links.
[Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces.
[Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC791, RFC826, RFC792
|
|
---|---|
|
|
ip6¶
eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev¶
IPv4 routing test cases with vhost user interface
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6-ICMPv6 for IPv6 routing on both links.
[Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running VPP ip6 interconnecting vhost-user interfaces.
[Ver] TG verification: Test ICMPv6 Echo Request packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861
|
|
---|---|
|
|
l2bd¶
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev¶
L2 bridge-domain test cases with vhost user interface
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 is configured with two L2 bridge-domains (L2BD) switching combined with MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is configured with VPP l2 cross-connect interconnecting vhost-user interfaces.
[Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC792
|
|
---|---|
|
|
l2xc¶
eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev¶
L2 cross-connect test cases with vhost user interface
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is configured with VPP l2 cross-connect interconnecting vhost-user interfaces.
[Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC792
|
|
---|---|
|
|