7.1.5. IPv6 Overlay Tunnels¶
7.1.5.1. 10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc¶
RFC6830: Pkt throughput Lisp test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search
- [Ref] Applicable standard specifications: RFC6830.
| Name | Documentation | Status |
|---|---|---|
| tc01-78B-1t1c-ethip6lispip4-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps. |
FINAL_RATE: 4959674.1875 pps (2x 2479837.09375 pps) FINAL_BANDWIDTH: 3.888384563 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/3698/3841’, ‘30/2181/2282’] LAT_50%NDR: [‘10/33/88’, ‘10/33/100’] LAT_10%NDR: [‘10/24/97’, ‘10/23/93’] |
| tc02-78B-1t1c-ethip6lispip4-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps, LT=0.5%. |
FINAL_RATE: 4959674.1875 pps (2x 2479837.09375 pps) FINAL_BANDWIDTH: 3.888384563 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘20/2324/3786’, ‘20/2185/2295’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc03-1460B-1t1c-ethip6lispip4-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps. |
FINAL_RATE: 1636124.0 pps (2x 818062.0 pps) FINAL_BANDWIDTH: 19.37170816 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/44/300’, ‘20/46/293’] LAT_50%NDR: [‘20/33/144’, ‘20/32/145’] LAT_10%NDR: [‘20/29/88’, ‘20/29/78’] |
| tc04-1460B-1t1c-ethip6lispip4-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps, LT=0.5%. |
FINAL_RATE: 1636124.0 pps (2x 818062.0 pps) FINAL_BANDWIDTH: 19.37170816 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘20/22/293’, ‘20/20/279’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc05-9000B-1t1c-ethip6lispip4-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps. |
FINAL_RATE: 275694.0 pps (2x 137847.0 pps) FINAL_BANDWIDTH: 19.89407904 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘50/83/283’, ‘50/82/282’] LAT_50%NDR: [‘50/66/218’, ‘50/68/215’] LAT_10%NDR: [‘50/59/145’, ‘50/63/104’] |
| tc06-9000B-1t1c-ethip6lispip4-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps, LT=0.5%. |
FINAL_RATE: 275694.0 pps (2x 137847.0 pps) FINAL_BANDWIDTH: 19.89407904 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘50/80/277’, ‘60/78/290’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc07-78B-2t2c-ethip6lispip4-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps. |
FINAL_RATE: 8926069.34376 pps (2x 4463034.67188 pps) FINAL_BANDWIDTH: 6.99803836551 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘10/64/177’, ‘10/82/188’] LAT_50%NDR: [‘10/30/72’, ‘10/30/83’] LAT_10%NDR: [‘10/22/51’, ‘10/21/52’] |
| tc08-78B-2t2c-ethip6lispip4-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps, LT=0.5%. |
FINAL_RATE: 8926069.34376 pps (2x 4463034.67188 pps) FINAL_BANDWIDTH: 6.99803836551 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘10/66/185’, ‘20/69/118’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc09-1460B-2t2c-ethip6lispip4-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps. |
FINAL_RATE: 1636124.0 pps (2x 818062.0 pps) FINAL_BANDWIDTH: 19.37170816 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/40/276’, ‘20/40/226’] LAT_50%NDR: [‘20/15/271’, ‘20/14/224’] LAT_10%NDR: [‘20/27/103’, ‘20/25/161’] |
| tc10-1460B-2t2c-ethip6lispip4-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps, LT=0.5%. |
FINAL_RATE: 1636124.0 pps (2x 818062.0 pps) FINAL_BANDWIDTH: 19.37170816 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘20/21/218’, ‘20/20/223’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc11-9000B-2t2c-ethip6lispip4-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps. |
FINAL_RATE: 275694.0 pps (2x 137847.0 pps) FINAL_BANDWIDTH: 19.89407904 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘60/75/259’, ‘50/77/162’] LAT_50%NDR: [‘50/66/241’, ‘50/67/145’] LAT_10%NDR: [‘50/62/146’, ‘50/63/154’] |
| tc12-9000B-2t2c-ethip6lispip4-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps, LT=0.5%. |
FINAL_RATE: 275694.0 pps (2x 137847.0 pps) FINAL_BANDWIDTH: 19.89407904 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘60/38/258’, ‘50/38/279’] LOSS_ACCEPTANCE: 0.5 percentage |
7.1.5.2. 10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc¶
RFC6830: Pkt throughput Lisp test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search
- [Ref] Applicable standard specifications: RFC6830.
| Name | Documentation | Status |
|---|---|---|
| tc01-78B-1t1c-ethip6lispip6-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps. |
FINAL_RATE: 4219280.375 pps (2x 2109640.1875 pps) FINAL_BANDWIDTH: 3.307915814 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/164/280’, ‘20/170/290’] LAT_50%NDR: [‘10/47/130’, ‘10/51/122’] LAT_10%NDR: [‘10/22/75’, ‘10/26/84’] |
| tc02-78B-1t1c-ethip6lispip6-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps, LT=0.5%. |
FINAL_RATE: 4219280.375 pps (2x 2109640.1875 pps) FINAL_BANDWIDTH: 3.307915814 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘20/187/302’, ‘20/190/330’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc03-1460B-1t1c-ethip6lispip6-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps. |
FINAL_RATE: 1602288.53125 pps (2x 801144.265625 pps) FINAL_BANDWIDTH: 18.97109621 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/53/155’, ‘20/54/134’] LAT_50%NDR: [‘20/36/105’, ‘20/38/105’] LAT_10%NDR: [‘20/29/54’, ‘20/29/57’] |
| tc04-1460B-1t1c-ethip6lispip6-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps, LT=0.5%. |
FINAL_RATE: 1628227.6875 pps (2x 814113.84375 pps) FINAL_BANDWIDTH: 19.27821582 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘20/690/1467’, ‘20/690/1503’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc05-9000B-1t1c-ethip6lispip6-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps. |
FINAL_RATE: 244801.5 pps (2x 122400.75 pps) FINAL_BANDWIDTH: 17.66487624 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘50/76/171’, ‘50/76/184’] LAT_50%NDR: [‘50/66/216’, ‘50/69/219’] LAT_10%NDR: [‘50/64/191’, ‘50/64/196’] |
| tc06-9000B-1t1c-ethip6lispip6-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps, LT=0.5%. |
FINAL_RATE: 244801.5 pps (2x 122400.75 pps) FINAL_BANDWIDTH: 17.66487624 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘50/76/219’, ‘50/77/223’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc07-78B-2t2c-ethip6lispip6-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps. |
FINAL_RATE: 7873171.625 pps (2x 3936585.8125 pps) FINAL_BANDWIDTH: 6.172566554 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/56/136’, ‘20/64/205’] LAT_50%NDR: [‘10/37/78’, ‘10/20/68’] LAT_10%NDR: [‘10/23/531’, ‘10/11/532’] |
| tc08-78B-2t2c-ethip6lispip6-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames using binary search start at 10GE linerate, step 100kpps, LT=0.5%. |
FINAL_RATE: 7873171.625 pps (2x 3936585.8125 pps) FINAL_BANDWIDTH: 6.172566554 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘10/64/215’, ‘10/71/307’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc09-1460B-2t2c-ethip6lispip6-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps. |
FINAL_RATE: 1602288.53125 pps (2x 801144.265625 pps) FINAL_BANDWIDTH: 18.97109621 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘20/41/186’, ‘20/41/63’] LAT_50%NDR: [‘20/31/60’, ‘20/31/52’] LAT_10%NDR: [‘20/27/149’, ‘20/26/39’] |
| tc10-1460B-2t2c-ethip6lispip6-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 1460 Byte frames using binary search start at 10GE linerate, step 10kpps, LT=0.5%. |
FINAL_RATE: 1628227.6875 pps (2x 814113.84375 pps) FINAL_BANDWIDTH: 19.27821582 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘20/1368/1395’, ‘20/1368/1383’] LOSS_ACCEPTANCE: 0.5 percentage |
| tc11-9000B-2t2c-ethip6lispip6-ip6base-ndrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps. |
FINAL_RATE: 244801.5 pps (2x 122400.75 pps) FINAL_BANDWIDTH: 17.66487624 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%NDR: [‘50/75/180’, ‘50/75/127’] LAT_50%NDR: [‘50/68/199’, ‘50/68/102’] LAT_10%NDR: [‘50/64/173’, ‘50/64/116’] |
| tc12-9000B-2t2c-ethip6lispip6-ip6base-pdrdisc | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE linerate, step 5kpps. |
FINAL_RATE: 244801.5 pps (2x 122400.75 pps) FINAL_BANDWIDTH: 17.66487624 Gbps (untagged) LATENCY usec [min/avg/max] LAT_100%PDR: [‘50/73/218’, ‘50/74/141’] LOSS_ACCEPTANCE: 0.5 percentage |