2.98. test_nat64 module

class test_nat64.TestNAT64(methodName='runTest')

Bases: framework.VppTestCase

NAT64 Test Cases

property SYSLOG_SEVERITY
clear_nat64()

Clear NAT64 configuration.

compose_ip6(ip4, pref, plen)

Compose IPv4-embedded IPv6 addresses

Parameters

  • ip4 – IPv4 address

  • pref – IPv6 prefix

  • plen – IPv6 prefix length

Returns

IPv4-embedded IPv6 addresses

property config_flags
create_stream_frag(src_if, dst, sport, dport, data, proto=scapy.data.IP_PROTOS.tcp, echo_reply=False)

Create fragmented packet stream

Parameters

  • src_if – Source interface

  • dst – Destination IPv4 address

  • sport – Source port

  • dport – Destination port

  • data – Payload data

  • proto – protocol (TCP, UDP, ICMP)

  • echo_reply – use echo_reply if protocol is ICMP

Returns

Fragments

create_stream_frag_ip6(src_if, dst, sport, dport, data, pref=None, plen=0, frag_size=128)

Create fragmented packet stream

Parameters

  • src_if – Source interface

  • dst – Destination IPv4 address

  • sport – Source TCP port

  • dport – Destination TCP port

  • data – Payload data

  • pref – NAT64 prefix

  • plen – NAT64 prefix length

  • fragsize – size of fragments

Returns

Fragments

create_stream_in_ip6(in_if, out_if, hlim=64, pref=None, plen=0)

Create IPv6 packet stream for inside network

Parameters

  • in_if – Inside interface

  • out_if – Outside interface

  • ttl – Hop Limit of generated packets

  • pref – NAT64 prefix

  • plen – NAT64 prefix length

create_stream_out(out_if, dst_ip=None, ttl=64, use_inside_ports=False)

Create packet stream for outside network

Parameters

  • out_if – Outside interface

  • dst_ip – Destination IP address (Default use global NAT address)

  • ttl – TTL of generated packets

  • use_inside_ports – Use inside NAT ports as destination ports instead of outside ports

nat64_get_ses_num()

Return number of active NAT64 sessions.

reass_frags_and_verify(frags, src, dst)

Reassemble and verify fragmented packet

Parameters

  • frags – Captured fragments

  • src – Source IPv4 address to verify

  • dst – Destination IPv4 address to verify

Returns

Reassembled IPv4 packet

reass_frags_and_verify_ip6(frags, src, dst)

Reassemble and verify fragmented packet

Parameters

  • frags – Captured fragments

  • src – Source IPv6 address to verify

  • dst – Destination IPv6 address to verify

Returns

Reassembled IPv6 packet

setUp()

Clear trace before running each test

classmethod setUpClass()

Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api

show_commands_at_teardown()

Allow subclass specific teardown logging additions.

tearDown()

Show various debug prints after each test

classmethod tearDownClass()

Perform final cleanup after running all tests in this test-case

test_dynamic()

NAT64 dynamic translation test

test_frag_in_order()

NAT64 translate fragments arriving in order

test_frag_out_of_order()

NAT64 translate fragments arriving out of order

test_hairpinning()

NAT64 hairpinning

test_hairpinning_unknown_proto()

NAT64 translate packet with unknown protocol - hairpinning

test_icmp_error()

NAT64 ICMP Error message translation

test_interface()

Enable/disable NAT64 feature on the interface

test_interface_addr()

Acquire NAT64 pool addresses from interface

test_ipfix_bib_ses()

IPFIX logging NAT64 BIB/session create and delete events

test_ipfix_max_bibs_sessions()

IPFIX logging maximum session and BIB entries exceeded

test_nat64_inside_interface_handles_neighbor_advertisement()

NAT64 inside interface handles Neighbor Advertisement

test_one_armed_nat64()

One armed NAT64

test_pool()

Add/delete address to NAT64 pool

test_prefix()

NAT64 Network-Specific Prefix

test_reass_hairpinning()

NAT64 fragments hairpinning

test_session_timeout()

NAT64 session timeout

test_set_timeouts()

Set NAT64 timeouts

test_static()

NAT64 static translation test

test_static_bib()

Add/delete static BIB entry

test_syslog_sess()

Test syslog session creation and deletion

test_tags = [<TestCaseTag.FIXME_VPP_WORKERS: 2>]
test_unknown_proto()

NAT64 translate packet with unknown protocol

verify_capture_in_ip6(capture, src_ip, dst_ip)

Verify captured IPv6 packets on inside network

Parameters

  • capture – Captured packets

  • src_ip – Source IP

  • dst_ip – Destination IP address

verify_capture_out(capture, nat_ip=None, same_port=False, dst_ip=None, is_ip6=False, ignore_port=False)

Verify captured packets on outside network

Parameters

  • capture – Captured packets

  • nat_ip – Translated IP address (Default use global NAT address)

  • same_port – Source port number is not translated (Default False)

  • dst_ip – Destination IP address (Default do not verify)

  • is_ip6 – If L3 protocol is IPv6 (Default False)

verify_ipfix_bib(data, is_create, src_addr)

Verify IPFIX NAT64 BIB create and delete events

Parameters

  • data – Decoded IPFIX data records

  • is_create – Create event if nonzero value otherwise delete event

  • src_addr – IPv6 source address

verify_ipfix_max_bibs(data, limit)

Verify IPFIX maximum BIB entries exceeded event

Parameters

  • data – Decoded IPFIX data records

  • limit – Number of maximum BIB entries that can be created.

verify_ipfix_max_sessions(data, limit)

Verify IPFIX maximum session entries exceeded event

Parameters

  • data – Decoded IPFIX data records

  • limit – Number of maximum session entries that can be created.

verify_ipfix_nat64_ses(data, is_create, src_addr, dst_addr, dst_port)

Verify IPFIX NAT64 session create and delete events

Parameters

  • data – Decoded IPFIX data records

  • is_create – Create event if nonzero value otherwise delete event

  • src_addr – IPv6 source address

  • dst_addr – IPv4 destination address

  • dst_port – destination TCP port

verify_syslog_sess(data, is_add=True, is_ip6=False)