2.56. vpp_interface module¶
-
class
vpp_interface.VppInterface(test)¶ Bases:
objectGeneric VPP interface.
-
add_sub_if(sub_if)¶ Register a sub-interface with this interface.
Parameters: sub_if – sub-interface
-
admin_down()¶ Put interface ADMIN-down.
-
admin_up()¶ Put interface ADMIN-UP.
-
config_ip4()¶ Configure IPv4 address on the VPP interface.
-
config_ip6()¶ Configure IPv6 address on the VPP interface.
-
configure_ipv4_neighbors()¶ For every remote host assign neighbor’s MAC to IPv4 addresses.
Parameters: vrf_id – The FIB table / VRF ID. (Default value = 0)
-
configure_ipv6_neighbors()¶ For every remote host assign neighbor’s MAC to IPv6 addresses.
Parameters: vrf_id – The FIB table / VRF ID. (Default value = 0)
-
disable_ipv6_ra()¶ Configure IPv6 RA suppress on the VPP interface.
-
disable_mpls()¶ Enable MPLS on the VPP interface.
-
dump¶ RAW result of sw_interface_dump for this interface.
-
enable_mpls()¶ Enable MPLS on the VPP interface.
-
generate_remote_hosts(count=1)¶ Generate and add remote hosts for the interface.
Parameters: count (int) – Number of generated remote hosts.
-
host_by_ip4(ip)¶ Parameters: ip – IPv4 address to find host by. Returns: Host object assigned to interface.
-
host_by_ip6(ip)¶ Parameters: ip – IPv6 address to find host by. Returns: Host object assigned to interface.
-
host_by_mac(mac)¶ Parameters: mac – MAC address to find host by. Returns: Host object assigned to interface.
-
ip6_disable()¶ Put interface ADMIN-DOWN.
-
ip6_enable()¶ IPv6 Enable interface
-
ip6_ra_config(no=0, suppress=0, send_unicast=0)¶ Configure IPv6 RA suppress on the VPP interface.
-
ip6_ra_prefix(address, address_length, is_no=0, off_link=0, no_autoconfig=0, use_default=0)¶ Configure IPv6 RA suppress on the VPP interface.
-
is_ip4_entry_in_fib_dump(dump)¶
-
local_ip4¶ Local IPv4 address on VPP interface (string).
-
local_ip4n¶ Local IPv4 address - raw, suitable as API parameter.
-
local_ip6¶ Local IPv6 address on VPP interface (string).
-
local_ip6_ll¶ Local IPv6 linnk-local address on VPP interface (string).
-
local_ip6n¶ Local IPv6 address - raw, suitable as API parameter.
-
local_ip6n_ll¶ Local IPv6 link-local address - raw, suitable as API parameter.
-
local_mac¶ MAC-address of the VPP interface.
-
name¶ Name of the interface.
-
remote_hosts¶ Remote hosts list
-
remote_ip4¶ IPv4 address of remote peer “connected” to this interface.
-
remote_ip4n¶ IPv4 address of remote peer - raw, suitable as API parameter.
-
remote_ip6¶ IPv6 address of remote peer “connected” to this interface.
-
remote_ip6n¶ IPv6 address of remote peer - raw, suitable as API parameter
-
remote_mac¶ MAC-address of the remote interface “connected” to this interface
-
set_proxy_arp(enable=1)¶ Set the interface to enable/disable Proxy ARP
-
set_table_ip4(table_id)¶ Set the interface in a IPv4 Table.
Note
Must be called before configuring IP4 addresses.
-
set_table_ip6(table_id)¶ Set the interface in a IPv6 Table.
Note
Must be called before configuring IP6 addresses.
-
set_unnumbered(ip_sw_if_index)¶ Set the interface to unnumbered via ip_sw_if_index
-
sw_if_index¶ Interface index assigned by VPP.
-
test¶ Test case creating this interface.
-
unconfig()¶ Unconfigure IPv6 and IPv4 address on the VPP interface.
-
unconfig_ip4()¶ Remove IPv4 address on the VPP interface.
-
unconfig_ip6()¶ Remove IPv6 address on the VPP interface.
-
unset_unnumbered(ip_sw_if_index)¶ Unset the interface to unnumbered via ip_sw_if_index
-