2.52. vpp_papi_provider module¶

class vpp_papi_provider.L2_VTR_OP¶

L2_DISABLED = 0¶

L2_POP_1 = 3¶

L2_POP_2 = 4¶

L2_PUSH_1 = 1¶

L2_PUSH_2 = 2¶

L2_TRANSLATE_1_1 = 5¶

L2_TRANSLATE_1_2 = 6¶

L2_TRANSLATE_2_1 = 7¶

L2_TRANSLATE_2_2 = 8¶

exception vpp_papi_provider.UnexpectedApiReturnValueError¶

Bases: exceptions.Exception

exception raised when the API return value is unexpected

class vpp_papi_provider.VppPapiProvider(name, shm_prefix, test_class)¶

Bases: object

VPP-api provider using vpp-papi

@property hook: hook object providing before and after api/cli hooks

api(api_fn, api_args, expected_retval=0)¶

Call API function and check it’s return value. Call the appropriate hooks before and after the API call

Parameters:	api_fn – API function to call api_args – tuple of API function arguments expected_retval – Expected return value (Default value = 0)
Returns:	reply from the API

bfd_auth_del_key(conf_key_id)¶

bfd_auth_keys_dump()¶

bfd_auth_set_key(conf_key_id, auth_type, key)¶

bfd_udp_add(sw_if_index, desired_min_tx, required_min_rx, detect_mult, local_addr, peer_addr, is_ipv6=0, bfd_key_id=None, conf_key_id=None)¶

bfd_udp_auth_activate(sw_if_index, local_addr, peer_addr, is_ipv6=0, bfd_key_id=None, conf_key_id=None, is_delayed=False)¶

bfd_udp_auth_deactivate(sw_if_index, local_addr, peer_addr, is_ipv6=0, is_delayed=False)¶

bfd_udp_del(sw_if_index, local_addr, peer_addr, is_ipv6=0)¶

bfd_udp_del_echo_source()¶

bfd_udp_mod(sw_if_index, desired_min_tx, required_min_rx, detect_mult, local_addr, peer_addr, is_ipv6=0)¶

bfd_udp_session_dump()¶

bfd_udp_session_set_flags(admin_up_down, sw_if_index, local_addr, peer_addr, is_ipv6=0)¶

bfd_udp_set_echo_source(sw_if_index)¶

bridge_domain_add_del(bd_id, flood=1, uu_flood=1, forward=1, learn=1, arp_term=0, is_add=1)¶

Create/delete bridge domain.

Parameters:

bd_id (int) – Bridge domain index.
flood (int) – Enable/disable bcast/mcast flooding in the BD. (Default value = 1)
uu_flood (int) – Enable/disable unknown unicast flood in the BD. (Default value = 1)
forward (int) – Enable/disable forwarding on all interfaces in the BD. (Default value = 1)
learn (int) – Enable/disable learning on all interfaces in the BD. (Default value = 1)
arp_term (int) – Enable/disable arp termination in the BD. (Default value = 1)
is_add (int) – Add or delete flag. (Default value = 1)

bridge_domain_dump(bd_id=0)¶

Parameters:	bd_id (int) – Bridge domain ID. (Default value = 0 => dump of all existing bridge domains returned)
Returns:	Dictionary of bridge domain(s) data.

bridge_flags(bd_id, is_set, feature_bitmap)¶

Enable/disable required feature of the bridge domain with defined ID.

Parameters:	bd_id (int) – Bridge domain ID. is_set (int) – Set to 1 to enable, set to 0 to disable the feature. feature_bitmap (int) – Bitmap value of the feature to be set: - learn (1 << 0), - forward (1 << 1), - flood (1 << 2), - uu-flood (1 << 3) or - arp-term (1 << 4).

classify_add_del_session(is_add, table_index, match, opaque_index=4294967295, hit_next_index=4294967295, advance=0, action=0, metadata=0)¶

Parameters:	is_add – table_index – match – opaque_index – (Default value = 0xFFFFFFFF) hit_next_index – (Default value = 0xFFFFFFFF) advance – (Default value = 0) action – (Default value = 0) metadata – (Default value = 0)

classify_add_del_table(is_add, mask, match_n_vectors=1, table_index=4294967295, nbuckets=2, memory_size=2097152, skip_n_vectors=0, next_table_index=4294967295, miss_next_index=4294967295, current_data_flag=0, current_data_offset=0)¶

Parameters:

is_add –
mask –
match_n_vectors – (Default value = 1)
table_index – (Default value = 0xFFFFFFFF)
nbuckets – (Default value = 2)
memory_size – (Default value = 2097152)
skip_n_vectors – (Default value = 0)
next_table_index – (Default value = 0xFFFFFFFF)
miss_next_index – (Default value = 0xFFFFFFFF)
current_data_flag – (Default value = 0)
current_data_offset – (Default value = 0)

cli(cli)¶

Execute a CLI, calling the before/after hooks appropriately.

Parameters:	cli – CLI to execute
Returns:	CLI output

collect_events()¶: Collect all events from the internal queue and clear the queue.

connect()¶: Connect the API to VPP

control_ping()¶

create_loopback(mac='')¶

Parameters:	mac – (Optional)

create_subif(sw_if_index, sub_id, outer_vlan, inner_vlan, no_tags=0, one_tag=0, two_tags=0, dot1ad=0, exact_match=0, default_sub=0, outer_vlan_id_any=0, inner_vlan_id_any=0)¶

Create subinterface from vpe.api: set dot1ad = 0 for dot1q, set dot1ad = 1 for dot1ad

Parameters:

sub_id – param inner_vlan:
sw_if_index –
outer_vlan –
inner_vlan –
no_tags – (Default value = 0)
one_tag – (Default value = 0)
two_tags – (Default value = 0)
dot1ad – (Default value = 0)
exact_match – (Default value = 0)
default_sub – (Default value = 0)
outer_vlan_id_any – (Default value = 0)
inner_vlan_id_any – (Default value = 0)

create_vlan_subif(sw_if_index, vlan)¶

Parameters:	vlan – sw_if_index –

delete_loopback(sw_if_index)¶

delete_subif(sw_if_index)¶

Delete subinterface

Parameters:	sw_if_index –

dhcp_proxy_config(dhcp_server, dhcp_src_address, rx_table_id=0, server_table_id=0, is_add=1, is_ipv6=0)¶

dhcp_proxy_set_vss(table_id, fib_id, oui, is_add=1, is_ip6=0)¶

disconnect()¶: Disconnect the API from VPP

expect_negative_api_retval()¶: Expect API failure

expect_zero_api_retval()¶: Expect API success

gre_tunnel_add_del(src_address, dst_address, outer_fib_id=0, is_teb=0, is_add=1, is_ip6=0)¶

Add a GRE tunnel

Parameters:	src_address – dst_address – outer_fib_id – (Default value = 0) is_add – (Default value = 1) is_ipv6 – (Default value = 0) is_teb – (Default value = 0)

gtpu_add_del_tunnel(src_addr, dst_addr, is_add=1, is_ipv6=0, mcast_sw_if_index=4294967295, encap_vrf_id=0, decap_next_index=4294967295, teid=0)¶

Parameters:	is_add – (Default value = 1) is_ipv6 – (Default value = 0) src_addr – dst_addr – mcast_sw_if_index – (Default value = 0xFFFFFFFF) encap_vrf_id – (Default value = 0) decap_next_index – (Default value = 0xFFFFFFFF) teid – (Default value = 0)

input_acl_set_interface(is_add, sw_if_index, ip4_table_index=4294967295, ip6_table_index=4294967295, l2_table_index=4294967295)¶

Parameters:	is_add – sw_if_index – ip4_table_index – (Default value = 0xFFFFFFFF) ip6_table_index – (Default value = 0xFFFFFFFF) l2_table_index – (Default value = 0xFFFFFFFF)

ip6_fib_dump()¶

ip6_nd_proxy(address, sw_if_index, is_del=0)¶

ip6_sw_interface_enable_disable(sw_if_index, enable)¶: Enable/Disable An interface for IPv6

ip6_sw_interface_ra_config(sw_if_index, no, suppress, send_unicast)¶

ip6_sw_interface_ra_prefix(sw_if_index, address, address_length, use_default=0, no_advertise=0, off_link=0, no_autoconfig=0, no_onlink=0, is_no=0, val_lifetime=4294967295, pref_lifetime=4294967295)¶

ip_add_del_route(dst_address, dst_address_length, next_hop_address, next_hop_sw_if_index=4294967295, table_id=0, next_hop_table_id=0, next_hop_weight=1, next_hop_n_out_labels=0, next_hop_out_label_stack=[], next_hop_via_label=1048576, create_vrf_if_needed=0, is_resolve_host=0, is_resolve_attached=0, classify_table_index=4294967295, is_add=1, is_drop=0, is_unreach=0, is_prohibit=0, is_ipv6=0, is_local=0, is_classify=0, is_multipath=0, not_last=0)¶

Parameters:

dst_address_length –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
dst_address –
next_hop_address –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
vrf_id – (Default value = 0)
lookup_in_vrf – (Default value = 0)
classify_table_index – (Default value = 0xFFFFFFFF)
create_vrf_if_needed – (Default value = 0)
is_add – (Default value = 1)
is_drop – (Default value = 0)
is_ipv6 – (Default value = 0)
is_local – (Default value = 0)
is_classify – (Default value = 0)
is_multipath – (Default value = 0)
is_resolve_host – (Default value = 0)
is_resolve_attached – (Default value = 0)
not_last – (Default value = 0)
next_hop_weight – (Default value = 1)

ip_dump(is_ipv6=0)¶

Return IP dump.

Parameters:	is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

ip_fib_dump()¶

ip_mfib_dump()¶

ip_mroute_add_del(src_address, grp_address, grp_address_length, e_flags, next_hop_sw_if_index, i_flags, rpf_id=0, table_id=0, create_vrf_if_needed=0, is_add=1, is_ipv6=0, is_local=0)¶

ip_neighbor_add_del(sw_if_index, mac_address, dst_address, is_add=1, is_ipv6=0, is_static=0, is_no_adj_fib=0)¶

Add neighbor MAC to IPv4 or IPv6 address.

Parameters:	sw_if_index – mac_address – dst_address – is_add – (Default value = 1) is_ipv6 – (Default value = 0) is_static – (Default value = 0) is_no_adj_fib – (Default value = 0)

ip_neighbor_dump(sw_if_index, is_ipv6=0)¶

Return IP neighbor dump.

Parameters:	sw_if_index – is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

l2fib_add_del(mac, bd_id, sw_if_index, is_add=1, static_mac=0, filter_mac=0, bvi_mac=0)¶

Create/delete L2 FIB entry.

Parameters:

mac (str) – MAC address to create FIB entry for.
bd_id (int) – Bridge domain index.
sw_if_index (int) – Software interface index of the interface.
is_add (int) – Add or delete flag. (Default value = 1)
static_mac (int) – Set to 1 to create static MAC entry. (Default value = 0)
filter_mac (int) – Set to 1 to drop packet that’s source or destination MAC address contains defined MAC address. (Default value = 0)
bvi_mac (int) – Set to 1 to create entry that points to BVI interface. (Default value = 0)

l2fib_flush_all()¶: Flush all L2 FIB.

l2fib_flush_bd(bd_id)¶

Flush L2 FIB entries for bd_id.

Parameters:	sw_if_index (int) – Bridge Domain id.

l2fib_flush_int(sw_if_index)¶

Flush L2 FIB entries for sw_if_index.

Parameters:	sw_if_index (int) – Software interface index of the interface.

lisp_adjacencies_get(vni=0)¶

lisp_adjacency(leid, reid, leid_len, reid_len, eid_type, is_add=1, vni=0)¶

lisp_eid_table_dump(eid_set=0, prefix_length=0, vni=0, eid_type=0, eid=None, filter_opt=0)¶

lisp_enable_disable(is_enabled)¶

lisp_local_mapping(ls_name, eid_type, eid, prefix_len, vni=0, key_id=0, key='', is_add=1)¶

lisp_locator(ls_name, sw_if_index, priority=1, weight=1, is_add=1)¶

lisp_locator_dump(is_index_set, ls_name=None, ls_index=0)¶

lisp_locator_set(ls_name, is_add=1)¶

lisp_locator_set_dump()¶

lisp_remote_mapping(eid_type, eid, eid_prefix_len=0, vni=0, rlocs=None, rlocs_num=0, is_src_dst=0, is_add=1)¶

map_add_domain(ip6_prefix, ip6_prefix_len, ip6_src, ip6_src_prefix_len, ip4_prefix, ip4_prefix_len, ea_bits_len=0, psid_offset=0, psid_length=0, is_translation=0, mtu=1280)¶

mfib_signal_dump()¶

mpls_fib_dump()¶

mpls_ip_bind_unbind(label, dst_address, dst_address_length, table_id=0, ip_table_id=0, is_ip4=1, create_vrf_if_needed=0, is_bind=1)¶

mpls_route_add_del(label, eos, next_hop_proto_is_ip4, next_hop_address, next_hop_sw_if_index=4294967295, table_id=0, next_hop_table_id=0, next_hop_weight=1, next_hop_n_out_labels=0, next_hop_out_label_stack=[], next_hop_via_label=1048576, create_vrf_if_needed=0, is_resolve_host=0, is_resolve_attached=0, is_interface_rx=0, is_rpf_id=0, is_multicast=0, is_add=1, is_drop=0, is_multipath=0, classify_table_index=4294967295, is_classify=0, not_last=0)¶

Parameters:

dst_address_length –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
dst_address –
next_hop_address –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
vrf_id – (Default value = 0)
lookup_in_vrf – (Default value = 0)
classify_table_index – (Default value = 0xFFFFFFFF)
create_vrf_if_needed – (Default value = 0)
is_add – (Default value = 1)
is_drop – (Default value = 0)
is_ipv6 – (Default value = 0)
is_local – (Default value = 0)
is_classify – (Default value = 0)
is_multipath – (Default value = 0)
is_multicast – (Default value = 0)
is_resolve_host – (Default value = 0)
is_resolve_attached – (Default value = 0)
not_last – (Default value = 0)
next_hop_weight – (Default value = 1)

mpls_tunnel_add_del(tun_sw_if_index, next_hop_proto_is_ip4, next_hop_address, next_hop_sw_if_index=4294967295, next_hop_table_id=0, next_hop_weight=1, next_hop_n_out_labels=0, next_hop_out_label_stack=[], next_hop_via_label=1048576, create_vrf_if_needed=0, is_add=1, l2_only=0, is_multicast=0)¶

Parameters:

dst_address_length –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
dst_address –
next_hop_address –
next_hop_sw_if_index – (Default value = 0xFFFFFFFF)
vrf_id – (Default value = 0)
lookup_in_vrf – (Default value = 0)
classify_table_index – (Default value = 0xFFFFFFFF)
create_vrf_if_needed – (Default value = 0)
is_add – (Default value = 1)
is_drop – (Default value = 0)
is_ipv6 – (Default value = 0)
is_local – (Default value = 0)
is_classify – (Default value = 0)
is_multipath – (Default value = 0)
is_resolve_host – (Default value = 0)
is_resolve_attached – (Default value = 0)
next_hop_weight – (Default value = 1)
is_multicast – (Default value = 0)

nat64_add_del_interface(sw_if_index, is_inside=1, is_add=1)¶: Enable/disable NAT64 feature on the interface :param sw_if_index: Index of the interface :param is_inside: 1 if inside, 0 if outside (Default value = 1) :param is_add: 1 if add, 0 if delete (Default value = 1)

nat64_add_del_pool_addr_range(start_addr, end_addr, vrf_id=4294967295, is_add=1)¶

Add/del address range to NAT64 pool

Parameters:	start_addr – First IP address end_addr – Last IP address vrf_id – VRF id for the address range is_add – 1 if add, 0 if delete (Default value = 1)

nat64_add_del_prefix(prefix, plen, vrf_id=0, is_add=1)¶

Add/del NAT64 prefix

Parameters:	prefix – NAT64 prefix plen – NAT64 prefix length vrf_id – VRF id of tenant (Default 0) is_add – 1 if add, 0 if delete (Default value = 1)

nat64_add_del_static_bib(in_ip, out_ip, in_port, out_port, protocol, vrf_id=0, is_add=1)¶

Add/delete S-NAT static BIB entry

Parameters:	in_ip – Inside IPv6 address out_ip – Outside IPv4 address in_port – Inside port number out_port – Outside port number protocol – IP protocol vrf_id – VRF ID (Default value = 0) is_add – 1 if add, 0 if delete (Default value = 1)

nat64_bib_dump(protocol)¶

Dump NAT64 BIB

Parameters:	protocol – IP protocol
Returns:	Dictionary of NAT64 BIB entries

nat64_get_timeouts()¶

Get values of timeouts for NAT64

Returns:	Timeouts for NAT64 (in seconds)

nat64_interface_dump()¶: Dump interfaces with NAT64 feature :return: Dictionary of interfaces with NAT64 feature

nat64_pool_addr_dump()¶: Dump NAT64 pool addresses :return: Dictionary of NAT64 pool addresses

nat64_prefix_dump()¶

Dump NAT64 prefix

Returns:	Dictionary of NAT64 prefixes

nat64_set_timeouts(udp=300, icmp=60, tcp_trans=240, tcp_est=7440, tcp_incoming_syn=6)¶

Set values of timeouts for NAT64 (in seconds)

Parameters:	udpi – UDP timeout (Default value = 300) icmp – ICMP timeout (Default value = 60) tcp_trans – TCP transitory timeout (Default value = 240) tcp_est – TCP established timeout (Default value = 7440) tcp_incoming_syn – TCP incoming SYN timeout (Default value = 6)

nat64_st_dump(protocol)¶

Dump NAT64 session table

Parameters:	protocol – IP protocol
Returns:	Dictionary of NAT64 sesstion table entries

pg_create_interface(pg_index)¶

Parameters:	pg_index –

ppcli(cli)¶

Helper method to print CLI command in case of info logging level.

Parameters:	cli – CLI to execute
Returns:	CLI output

proxy_arp_add_del(low_address, hi_address, vrf_id=0, is_add=1)¶

Config Proxy Arp Range.

Parameters:	low_address – Start address in the rnage to Proxy for hi_address – End address in the rnage to Proxy for vrf_id – The VRF/table in which to proxy

proxy_arp_intfc_enable_disable(sw_if_index, is_enable=1)¶

Enable/Disable an interface for proxy ARP requests

Parameters:	sw_if_index – Interface enable_disable – Enable/Disable

register_hook(hook)¶

Replace hook registration with new hook

Parameters:	hook –

reset_fib(vrf_id, is_ipv6=0)¶

Reset VRF (remove all routes etc.) request.

Parameters:	vrf_id (int) – ID of the FIB table / VRF to reset. is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

reset_vrf(vrf_id, is_ipv6=0)¶

Reset VRF (remove all routes etc.) request.

Parameters:	vrf_id (int) – ID of the FIB table / VRF to reset. is_ipv6 (int) – 1 for IPv6 neighbor, 0 for IPv4. (Default = 0)

set_ip_flow_hash(table_id, src=1, dst=1, sport=1, dport=1, proto=1, reverse=0, is_ip6=0)¶

set_ipfix_exporter(collector_address, src_address, path_mtu, template_interval, vrf_id=0, collector_port=4739, udp_checksum=0)¶

show_version()¶

snat_add_address_range(first_ip_address, last_ip_address, is_add=1, is_ip4=1, vrf_id=4294967295)¶

Add/del S-NAT address range

Parameters:	first_ip_address – First IP address last_ip_address – Last IP address vrf_id – VRF id for the address range is_add – 1 if add, 0 if delete (Default value = 1) is_ip4 – 1 if address type is IPv4 (Default value = 1)

snat_add_det_map(in_addr, in_plen, out_addr, out_plen, is_add=1)¶

Add/delete S-NAT deterministic mapping

:param is_add - 1 if add, 0 if delete :param in_addr - inside IP address :param in_plen - inside IP address prefix length :param out_addr - outside IP address :param out_plen - outside IP address prefix length

snat_add_interface_addr(sw_if_index, is_add=1)¶

Add/del S-NAT address from interface

Parameters:	sw_if_index – Software index of the interface is_add – 1 if add, 0 if delete (Default value = 1)

snat_add_static_mapping(local_ip, external_ip=0, external_sw_if_index=4294967295, local_port=0, external_port=0, addr_only=1, vrf_id=0, protocol=0, is_add=1, is_ip4=1)¶

Add/delete S-NAT static mapping

Parameters:

local_ip – Local IP address
external_ip – External IP address
external_sw_if_index – External interface instead of IP address
local_port – Local port number (Default value = 0)
external_port – External port number (Default value = 0)
addr_only – 1 if address only mapping, 0 if address and port
vrf_id – VRF ID
protocol – IP protocol (Default value = 0)
is_add – 1 if add, 0 if delete (Default value = 1)
is_ip4 – 1 if address type is IPv4 (Default value = 1)

snat_address_dump()¶: Dump S-NAT addresses :return: Dictionary of S-NAT addresses

snat_det_close_session_in(in_addr, in_port, ext_addr, ext_port, is_ip4=1)¶

Close CGN session using inside address and port

:param in_addr - inside IP address :param in_port - inside port :param ext_addr - external host IP address :param ext_port - external host port :param is_ip4: 1 if address type is IPv4 (Default value = 1)

snat_det_close_session_out(out_addr, out_port, ext_addr, ext_port, is_ip4=1)¶

Close CGN session using outside address and port

:param out_addr - outside IP address :param out_port - outside port :param ext_addr - external host IP address :param ext_port - external host port :param is_ip4: 1 if address type is IPv4 (Default value = 1)

snat_det_forward(in_addr)¶

Get outside address and port range from inside address

:param in_addr - inside IP address

snat_det_get_timeouts()¶

Get values of timeouts for deterministic NAT

Returns:	Timeouts for deterministic NAT (in seconds)

snat_det_map_dump()¶

Dump S-NAT deterministic mappings

Returns:	Dictionary of S-NAT deterministic mappings

snat_det_reverse(out_addr, out_port)¶

Get inside address from outside address and port

:param out_addr - outside IP address :param out_port - outside port

snat_det_session_dump(user_addr, is_ip4=1)¶

Dump S-NAT deterministic sessions belonging to a user

:param user_addr - inside IP address of the user :param is_ip4: - 1 if address type is IPv4 (Default value = 1) :return: Dictionary of S-NAT deterministic sessions

snat_det_set_timeouts(udp=300, tcp_established=7440, tcp_transitory=240, icmp=60)¶

Set values of timeouts for deterministic NAT (in seconds)

:param udp - UDP timeout (Default value = 300) :param tcp_established - TCP established timeout (Default value = 7440) :param tcp_transitory - TCP transitory timeout (Default value = 240) :param icmp - ICMP timeout (Default value = 60)

snat_interface_add_del_feature(sw_if_index, is_inside=1, is_add=1)¶

Enable/disable S-NAT feature on the interface

Parameters:	sw_if_index – Software index of the interface is_inside – 1 if inside, 0 if outside (Default value = 1) is_add – 1 if add, 0 if delete (Default value = 1)

snat_interface_addr_dump()¶: Dump S-NAT addresses interfaces :return: Dictionary of S-NAT addresses interfaces

snat_interface_dump()¶: Dump interfaces with S-NAT feature :return: Dictionary of interfaces with S-NAT feature

snat_ipfix(domain_id=1, src_port=4739, enable=1)¶

Enable/disable S-NAT IPFIX logging

Parameters:	domain_id – Observation domain ID (Default value = 1) src_port – Source port number (Default value = 4739) enable – 1 if enable, 0 if disable (Default value = 1)

snat_show_config()¶: Show S-NAT config :return: S-NAT config parameters

snat_static_mapping_dump()¶: Dump S-NAT static mappings :return: Dictionary of S-NAT static mappings

snat_user_dump()¶

Dump S-NAT users

Returns:	Dictionary of S-NAT users

snat_user_session_dump(ip_address, vrf_id, is_ip4=1)¶

Dump S-NAT user’s sessions

Parameters:	ip_address – ip adress of the user to be dumped cpu_index – cpu_index on which the user is vrf_id – VRF ID
Returns:	Dictionary of S-NAT sessions

sw_interface_add_del_address(sw_if_index, addr, addr_len, is_ipv6=0, is_add=1, del_all=0)¶

Parameters:	addr – param is_ipv6: (Default value = 0) sw_if_index – addr_len – is_ipv6 – (Default value = 0) is_add – (Default value = 1) del_all – (Default value = 0)

sw_interface_dump(filter=None)¶

Parameters:	filter – (Default value = None)

sw_interface_enable_disable_mpls(sw_if_index, is_enable=1)¶: Enable/Disable MPLS on the interface :param sw_if_index: :param is_enable: (Default value = 1)

sw_interface_ra_suppress(sw_if_index, suppress=1)¶

sw_interface_set_flags(sw_if_index, admin_up_down, link_up_down=0, deleted=0)¶

Parameters:	admin_up_down – sw_if_index – link_up_down – (Default value = 0) deleted – (Default value = 0)

sw_interface_set_l2_bridge(sw_if_index, bd_id, shg=0, bvi=0, enable=1)¶

Add/remove interface to/from bridge domain.

Parameters:	sw_if_index (int) – Software interface index of the interface. bd_id (int) – Bridge domain index. shg (int) – Split-horizon group index. (Default value = 0) bvi (int) – Set interface as a bridge group virtual interface. (Default value = 0) enable (int) – Add or remove interface. (Default value = 1)

sw_interface_set_l2_tag_rewrite(sw_if_index, vtr_oper, push=0, tag1=0, tag2=0)¶: L2 interface vlan tag rewrite configure request :param client_index - opaque cookie to identify the sender :param context - sender context, to match reply w/ request :param sw_if_index - interface the operation is applied to :param vtr_op - Choose from l2_vtr_op_t enum values :param push_dot1q - first pushed flag dot1q id set, else dot1ad :param tag1 - Needed for any push or translate vtr op :param tag2 - Needed for any push 2 or translate x-2 vtr ops

sw_interface_set_l2_xconnect(rx_sw_if_index, tx_sw_if_index, enable)¶

Create or delete unidirectional cross-connect from Tx interface to Rx interface.

Parameters:	rx_sw_if_index (int) – Software interface index of Rx interface. tx_sw_if_index (int) – Software interface index of Tx interface. enable (int) – Create cross-connect if equal to 1, delete cross-connect if equal to 0.

sw_interface_set_table(sw_if_index, is_ipv6, table_id)¶

Set the IPvX Table-id for the Interface

Parameters:	sw_if_index – is_ipv6 – table_id –

sw_interface_set_unnumbered(sw_if_index, ip_sw_if_index, is_add=1)¶

Set the Interface to be unnumbered

Parameters:	is_add – (Default value = 1)

:param sw_if_index - interface That will be unnumbered :param ip_sw_if_index - interface with an IP addres

sw_interface_span_enable_disable(sw_if_index_from, sw_if_index_to, state=1)¶

Parameters:	sw_if_index_from – sw_if_index_to – state –

vxlan_add_del_tunnel(src_addr, dst_addr, mcast_sw_if_index=4294967295, is_add=1, is_ipv6=0, encap_vrf_id=0, decap_next_index=4294967295, vni=0)¶

Parameters:	dst_addr – src_addr – is_add – (Default value = 1) is_ipv6 – (Default value = 0) encap_vrf_id – (Default value = 0) decap_next_index – (Default value = 0xFFFFFFFF) mcast_sw_if_index – (Default value = 0xFFFFFFFF) vni – (Default value = 0)

vxlan_gpe_add_del_tunnel(src_addr, dst_addr, mcast_sw_if_index=4294967295, is_add=1, is_ipv6=0, encap_vrf_id=0, decap_vrf_id=0, protocol=3, vni=0)¶

Parameters:	local – remote – is_add – (Default value = 1) is_ipv6 – (Default value = 0) encap_vrf_id – (Default value = 0) decap_vrf_id – (Default value = 0) mcast_sw_if_index – (Default value = 0xFFFFFFFF) protocol – (Default value = 3) vni – (Default value = 0)

wait_for_event(timeout, name=None)¶: Wait for and return next event.

want_bfd_events(enable_disable=1)¶