2.1. bfd module¶

BFD protocol implementation

class bfd.BFD(_pkt='', post_transform=None, _internal=0, _underlayer=None, **fields)¶

Bases: scapy.packet.Packet

BFD protocol layer for scapy

aliastypes = [<class 'bfd.BFD'>, <class 'scapy.packet.Packet'>]¶

bfd_pkt_len = 24¶

fields_desc = [<Field (BFD).version>, <Field (BFD).diag>, <Field (BFD).state>, <Field (BFD).flags>, <Field (BFD).detect_mult>, <Field (BFD).length>, <Field (BFD).my_discriminator>, <Field (BFD).your_discriminator>, <Field (BFD).desired_min_tx_interval>, <Field (BFD).required_min_rx_interval>, <Field (BFD).required_min_echo_rx_interval>, <scapy.fields.ConditionalField object>, <scapy.fields.ConditionalField object>, <scapy.fields.ConditionalField object>, <scapy.fields.ConditionalField object>, <scapy.fields.ConditionalField object>, <scapy.fields.ConditionalField object>, <scapy.fields.ConditionalField object>]¶

mysummary()¶

sha1_auth_len = 28¶

udp_dport = 3784¶: BFD destination port per RFC 5881

udp_dport_echo = 3785¶

udp_sport_max = 65535¶: BFD source port max value per RFC 5881

udp_sport_min = 49152¶: BFD source port min value per RFC 5881

class bfd.BFDAuthType(value)¶

Bases: util.NumericConstant

BFD Authentication Type

desc_dict = {0: 'No authentication', 1: 'Simple Password', 2: 'Keyed MD5', 3: 'Meticulous Keyed MD5', 4: 'Keyed SHA1', 5: 'Meticulous Keyed SHA1'}¶

keyed_md5 = 2¶

keyed_sha1 = 4¶

meticulous_keyed_md5 = 3¶

meticulous_keyed_sha1 = 5¶

no_auth = 0¶

simple_pwd = 1¶

class bfd.BFDDiagCode(value)¶

Bases: util.NumericConstant

BFD Diagnostic Code

administratively_down = 7¶

concatenated_path_down = 6¶

control_detection_time_expired = 1¶

desc_dict = {0: 'No diagnostic', 1: 'Control Detection Time Expired', 2: 'Echo Function Failed', 3: 'Neighbor Signaled Session Down', 4: 'Forwarding Plane Reset', 5: 'Path Down', 6: 'Concatenated Path Down', 7: 'Administratively Down', 8: 'Reverse Concatenated Path Down'}¶

echo_function_failed = 2¶

forwarding_plane_reset = 4¶

neighbor_signaled_session_down = 3¶

no_diagnostic = 0¶

path_down = 5¶

reverse_concatenated_path_down = 8¶

class bfd.BFDState(value)¶

Bases: util.NumericConstant

BFD State

admin_down = 0¶

desc_dict = {0: 'AdminDown', 1: 'Down', 2: 'Init', 3: 'Up'}¶

down = 1¶

init = 2¶

up = 3¶

class bfd.BFD_vpp_echo(_pkt='', post_transform=None, _internal=0, _underlayer=None, **fields)¶

Bases: scapy.packet.Packet

BFD echo packet as used by VPP (non-rfc, as rfc doesn’t define one)

aliastypes = [<class 'bfd.BFD_vpp_echo'>, <class 'scapy.packet.Packet'>]¶

fields_desc = [<Field (BFD_vpp_echo).discriminator>, <Field (BFD_vpp_echo).expire_time_clocks>, <Field (BFD_vpp_echo).checksum>]¶

mysummary()¶

udp_dport = 3785¶: BFD echo destination port per RFC 5881

class bfd.VppBFDAuthKey(test, conf_key_id, auth_type, key)¶

Bases: vpp_object.VppObject

Represents BFD authentication key in VPP

add_vpp_config()¶

auth_type¶: Authentication type for this key

conf_key_id¶: configuration key ID

get_bfd_auth_keys_dump_entry()¶: get the entry in the auth keys dump corresponding to this key

key¶: key data

object_id()¶

query_vpp_config()¶

remove_vpp_config()¶

test¶: Test which created this key

class bfd.VppBFDUDPSession(test, interface, peer_addr, local_addr=None, af=2, desired_min_tx=100000, required_min_rx=100000, detect_mult=3, sha1_key=None, bfd_key_id=None)¶

Bases: vpp_object.VppObject

Represents BFD UDP session in VPP

activate_auth(key, bfd_key_id=None, delayed=False)¶: activate authentication for this session

add_vpp_config()¶

admin_down()¶: set bfd session admin-down

admin_up()¶: set bfd session admin-up

af¶: Address family - AF_INET or AF_INET6

bfd_key_id¶: bfd key id in use

deactivate_auth(delayed=False)¶: deactivate authentication

desired_min_tx¶: desired minimum tx interval

detect_mult¶: detect multiplier

get_bfd_udp_session_dump_entry()¶: get the namedtuple entry from bfd udp session dump

interface¶: Interface on which this session lives

local_addr¶: BFD session local address (VPP address)

local_addr_n¶: BFD session local address (VPP address) - raw, suitable for API

modify_parameters(detect_mult=None, desired_min_tx=None, required_min_rx=None)¶: modify session parameters

object_id()¶

peer_addr¶: BFD session peer address

peer_addr_n¶: BFD session peer address - raw, suitable for API

query_vpp_config()¶

remove_vpp_config()¶

required_min_rx¶: required minimum rx interval

sha1_key¶: sha1 key

state¶: BFD session state

test¶: Test which created this session

bfd.bfd_is_auth_used(pkt)¶: is packet authenticated?

bfd.bfd_is_md5_or_sha1_used(pkt)¶: is md5 or sha1 used?

bfd.bfd_is_md5_used(pkt)¶: is md5 authentication used?

bfd.bfd_is_sha1_used(pkt)¶: is sha1 authentication used?

bfd.bfd_is_simple_pwd_used(pkt)¶: is simple password authentication used?