test_classifier module

class test_classifier.TestClassifier(methodName='runTest')

Bases: framework.VppTestCase

Classifier Test Case

static build_ip_mask(proto='', src_ip='', dst_ip='', src_port='', dst_port='')

Build IP ACL mask data with hexstring format

Parameters:
  • proto (str) – protocol number <0-ff>
  • src_ip (str) – source ip address <0-ffffffff>
  • dst_ip (str) – destination ip address <0-ffffffff>
  • src_port (str) – source port number <0-ffff>
  • dst_port (str) – destination port number <0-ffff>
static build_ip_match(proto='', src_ip='', dst_ip='', src_port='', dst_port='')

Build IP ACL match data with hexstring format

Parameters:
  • proto (str) – protocol number with valid option “<0-ff>”
  • src_ip (str) – source ip address with format of “x.x.x.x”
  • dst_ip (str) – destination ip address with format of “x.x.x.x”
  • src_port (str) – source port number <0-ffff>
  • dst_port (str) – destination port number <0-ffff>
static build_mac_mask(dst_mac='', src_mac='', ether_type='')

Build MAC ACL mask data with hexstring format

Parameters:
  • dst_mac (str) – source MAC address <0-ffffffffffff>
  • src_mac (str) – destination MAC address <0-ffffffffffff>
  • ether_type (str) – ethernet type <0-ffff>
static build_mac_match(dst_mac='', src_mac='', ether_type='')

Build MAC ACL match data with hexstring format

Parameters:
  • dst_mac (str) – source MAC address <x:x:x:x:x:x>
  • src_mac (str) – destination MAC address <x:x:x:x:x:x>
  • ether_type (str) – ethernet type <0-ffff>
config_pbr_fib_entry(intf)

Configure fib entry to route traffic toward PBR VRF table

Parameters:intf (VppInterface) – destination interface to be routed for PBR.
create_classify_session(intf, table_index, match, pbr_option=0, vrfid=0, is_add=1)

Create Classify Session

Parameters:
  • intf (VppInterface) – Interface to apply classify session.
  • table_index (int) – table index to identify classify table.
  • match (str) – matched value for interested traffic.
  • pbr_action (int) – enable/disable PBR feature.
  • vrfid (int) – VRF id.
  • is_add (int) – option to configure classify session. - create(1) or delete(0)
create_classify_table(key, mask, data_offset=0, is_add=1)

Create Classify Table

Parameters:
  • key (str) – key for classify table (ex, ACL name).
  • mask (str) – mask value for interested traffic.
  • match_n_vectors (int) –
  • is_add (int) – option to configure classify table. - create(1) or delete(0)
create_stream(src_if, dst_if, packet_sizes)

Create input packet stream for defined interfaces.

Parameters:
  • src_if (VppInterface) – Source Interface for packet stream.
  • dst_if (VppInterface) – Destination Interface for packet stream.
  • packet_sizes (list) – packet size to test.
input_acl_set_interface(intf, table_index, is_add=1)

Configure Input ACL interface

Parameters:
  • intf (VppInterface) – Interface to apply Input ACL feature.
  • table_index (int) – table index to identify classify table.
  • is_add (int) – option to configure classify session. - enable(1) or disable(0)
setUp()

Perform test setup before test case.

Config:
  • create 4 pg interfaces
    • untagged pg0/pg1/pg2 interface
      pg0 ——-> pg1 (IP ACL)
      —> pg2 (MAC ACL))
      -> pg3 (PBR)
  • setup interfaces:
    • put it into UP state
    • set IPv4 addresses
    • resolve neighbor address using ARP
Variables:
  • interfaces (list) – pg interfaces.
  • pg_if_packet_sizes (list) – packet sizes in test.
  • acl_tbl_idx (dict) – ACL table index.
  • pbr_vrfid (int) – VRF id for PBR test.
tearDown()

Run standard test teardown and acl related log.

test_acl_ip()

IP ACL test

Test scenario for basic IP ACL with source IP
  • Create IPv4 stream for pg0 -> pg1 interface.
  • Create ACL with source IP address.
  • Send and verify received packets on pg1 interface.
test_acl_mac()

MAC ACL test

Test scenario for basic MAC ACL with source MAC
  • Create IPv4 stream for pg0 -> pg2 interface.
  • Create ACL with source MAC address.
  • Send and verify received packets on pg2 interface.
test_acl_pbr()

IP PBR test

Test scenario for PBR with source IP
  • Create IPv4 stream for pg0 -> pg3 interface.
  • Configure PBR fib entry for packet forwarding.
  • Send and verify received packets on pg3 interface.
verify_capture(dst_if, capture)

Verify captured input packet stream for defined interface.

Parameters:
  • dst_if (VppInterface) – Interface to verify captured packet stream.
  • capture (list) – Captured packet stream.