3n-icx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   88  175  275        89  174  268  
 4.   96  174  225        89  156  218  
 5.  104  124  131        81  119  128  

 1518b-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   61  147  246        92  181  256  
 4.   44   80   99        52   99  126  
 5.   68   93  108        59   75   89  

 imix-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.63      22.38 
 2.  6.67      22.49 

 imix-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  7.35      24.80 
 2.  7.42      25.05 

 imix-8t4c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  7.77      26.23 
 2.  7.85      26.49

25ge2p1xxv710-avf-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.53      43.66 
 2.  3.55      43.88 
  
 3.   71  172  268        87  186  266  
 4.   67  110  129        78  138  156  
 5.  148  195  217       153  206  219  

 1518b-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.90      48.28 
 2.  3.92      48.52 
  
 3.   65  144  257        73  169  266  
 4.   53  104  124        66  104  128  
 5.  124  161  179       118  155  192  

 imix-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.49      13.72 
 2.  4.54      13.86 

 imix-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  5.05      15.43 
 2.  5.10      15.59 

 imix-8t4c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  5.30      16.20 
 2.  5.36      16.36

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   21   37   52        21   63  105  
 4.   49   82   96        50   81   94  
 5.   73   90  102       105  133  145  

 1518b-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   21   41   74        21   41   67  
 4.   37   88  107        41   58   73  
 5.   63   81   93        70   97  108  

 imix-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.41      18.25 
 2.  5.46      18.44 

 imix-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.13      20.70 
 2.  6.23      21.01 

 imix-8t4c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.60      22.28 
 2.  6.67      22.51

25ge2p1xxv710-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.14      38.87 
 2.  3.16      39.06 
  
 3.   21   38   72        21   44   76  
 4.   56  123  132        68  102  126  
 5.  148  213  243       161  223  261  

 1518b-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.59      44.45 
 2.  3.63      44.90 
  
 3.   23   48   77        22   43   58  
 4.   46   66   76        47   71   86  
 5.  107  152  172       115  156  181  

 imix-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.93      12.02 
 2.  3.95      12.08 

 imix-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.45      13.60 
 2.  4.47      13.67 

 imix-8t4c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.72      14.42 
 2.  4.77      14.57