3n-tsh-x520

10ge2p1x520-dot1q-l2bdbasemaclrn-mrr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
 dot1q-l2bdbasemaclrn-mrr 

 [4.86, 4.85, 4.86, 4.86, 4.86, 4.87, 4.86, 4.87, 4.87, 4.87] 

 64b-2t2c- 
 dot1q-l2bdbasemaclrn-mrr 

 [6.63, 6.62, 6.64, 6.64, 6.63, 6.62, 6.63, 6.62, 6.63, 6.65] 

 64b-4t4c- 
 dot1q-l2bdbasemaclrn-mrr 

 [5.13, 5.14, 5.15, 5.12, 5.12, 5.12, 5.14, 5.13, 5.14, 5.15]

10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross- connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-mrr 

 [3.27, 3.28, 3.29, 3.28, 3.28, 3.29, 3.28, 3.26, 3.28, 3.28] 

 64b-2t2c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-mrr 

 [4.21, 4.23, 4.20, 4.22, 4.22, 4.21, 4.20, 4.23, 4.16, 4.18] 

 64b-4t4c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-mrr 

 [4.19, 4.21, 4.22, 4.22, 4.22, 4.21, 4.21, 4.22, 4.22, 4.22]

10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross- connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-mrr 

 [3.21, 3.22, 3.21, 3.22, 3.21, 3.21, 3.21, 3.21, 3.21, 3.20] 

 64b-2t2c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-mrr 

 [4.53, 4.47, 4.46, 4.56, 4.59, 4.57, 4.41, 4.56, 4.57, 4.57] 

 64b-4t4c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-mrr 

 [4.53, 4.52, 4.52, 4.52, 4.51, 4.52, 4.51, 4.53, 4.52, 4.52]

10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-mrr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge- domain and MAC learning enabled. DUT2 is configured with L2 cross- connects. Required MACIP ACL rules are applied to input paths of both DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-mrr 

 [2.25, 2.25, 2.26, 2.25, 2.25, 2.25, 2.26, 2.25, 2.25, 2.25] 

 64b-2t2c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-mrr 

 [3.91, 3.81, 3.78, 3.79, 3.77, 3.77, 3.80, 3.78, 3.79, 3.78] 

 64b-4t4c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-mrr 

 [5.45, 5.47, 5.45, 5.47, 5.45, 5.46, 5.48, 5.47, 5.49, 5.48]

10ge2p1x520-eth-l2bdbasemaclrn-mrr

RFC2544: Pkt throughput L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
 eth-l2bdbasemaclrn-mrr 

 [5.69, 5.69, 5.70, 5.70, 5.75, 5.69, 5.70, 5.70, 5.71, 5.70] 

 64b-2t2c- 
 eth-l2bdbasemaclrn-mrr 

 [7.51, 7.56, 7.55, 7.52, 7.51, 7.54, 7.55, 7.53, 7.54, 7.53] 

 64b-4t4c- 
 eth-l2bdbasemaclrn-mrr 

 [5.30, 5.33, 5.31, 5.33, 5.33, 5.35, 5.35, 5.34, 5.36, 5.34]

10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-mrr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross- connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-mrr 

 [3.17, 3.17, 3.15, 3.15, 3.16, 3.15, 3.15, 3.14, 3.15, 3.15] 

 64b-2t2c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-mrr 

 [4.12, 4.11, 4.10, 4.11, 4.11, 4.12, 4.11, 4.12, 4.13, 4.13] 

 64b-4t4c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-mrr 

 [4.10, 4.11, 4.12, 4.13, 4.12, 4.12, 4.13, 4.07, 4.07, 4.08]

10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-mrr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross- connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-mrr 

 [3.10, 3.09, 3.10, 3.09, 3.10, 3.09, 3.09, 3.09, 3.09, 3.09] 

 64b-2t2c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-mrr 

 [4.38, 4.41, 4.42, 4.40, 4.40, 4.40, 4.39, 4.34, 4.36, 4.37] 

 64b-4t4c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-mrr 

 [4.40, 4.41, 4.42, 4.42, 4.43, 4.41, 4.41, 4.41, 4.42, 4.43]

10ge2p1x520-eth-l2patch-mrr

RFC2544: Pkt throughput L2patch test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 patch.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 patch DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with static payload MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2patch-mrr 

 [5.28, 5.37, 5.45, 5.44, 5.47, 5.44, 5.44, 5.45, 5.43, 5.44] 

 64b-2t2c-eth-l2patch-mrr 

 [5.48, 5.60, 5.64, 5.67, 5.72, 5.53, 5.61, 5.64, 5.64, 5.75] 

 64b-4t4c-eth-l2patch-mrr 

 [5.33, 5.37, 5.37, 5.37, 5.38, 5.38, 5.39, 5.38, 5.39, 4.50]

10ge2p1x520-eth-l2xcbase-mrr

RFC2544: Pkt throughput L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross-connect. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2xcbase-mrr 

 [7.06, 7.05, 7.06, 7.05, 7.06, 7.07, 7.06, 7.06, 7.06, 7.07] 

 64b-2t2c-eth-l2xcbase-mrr 

 [6.07, 6.02, 6.08, 6.09, 6.08, 6.07, 6.06, 6.06, 6.07, 6.06] 

 64b-4t4c-eth-l2xcbase-mrr 

 [5.21, 5.22, 5.22, 5.23, 5.23, 5.22, 5.23, 5.22, 5.22, 5.24]