2n-clx-e810cq

2n1l-100ge2p1e810cq-avf-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
 ethip4-ip4base-mrr 

 [21.38, 21.18, 21.14, 21.20, 21.10, 21.11, 21.18, 21.48, 21.21, 21.18] 

 64b-4t2c-avf- 
 ethip4-ip4base-mrr 

 [43.38, 42.92, 43.33, 43.11, 42.86, 43.02, 42.76, 42.95, 43.01, 42.70] 

 64b-8t4c-avf- 
 ethip4-ip4base-mrr 

 [84.05, 84.07, 83.62, 83.55, 83.36, 83.49, 83.69, 83.31, 83.32, 83.45]

2n1l-100ge2p1e810cq-avf-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
 ethip4-ip4scale20k-mrr 

 [18.90, 18.73, 18.69, 18.82, 18.68, 18.78, 18.72, 18.82, 18.75, 18.75] 

 64b-4t2c-avf- 
 ethip4-ip4scale20k-mrr 

 [37.36, 37.20, 37.26, 37.20, 37.17, 37.22, 37.30, 37.19, 37.16, 37.26] 

 64b-8t4c-avf- 
 ethip4-ip4scale20k-mrr 

 [75.26, 74.93, 74.78, 74.76, 74.75, 74.67, 74.88, 74.74, 74.61, 74.42]

2n1l-100ge2p1e810cq-avf-ethip4-ip4scale20k-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
 ethip4-ip4scale20k-rnd-mrr 

 [18.86, 18.92, 18.89, 18.91, 18.97, 18.95, 18.88, 18.88, 18.86, 18.91] 

 64b-4t2c-avf- 
 ethip4-ip4scale20k-rnd-mrr 

 [37.58, 37.43, 37.43, 37.42, 37.40, 37.41, 37.48, 37.39, 37.42, 37.42] 

 64b-8t4c-avf- 
 ethip4-ip4scale20k-rnd-mrr 

 [75.95, 75.27, 75.00, 75.17, 74.99, 74.80, 74.56, 75.04, 74.91, 74.91]

2n1l-100ge2p1e810cq-avf-ethip4udp-ip4base-iacl50sf-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
 ip4base-iacl50sf-10kflows-mrr 

 [11.54, 11.55, 12.08, 12.12, 12.02, 11.55, 11.54, 11.56, 11.56, 12.12] 

 64b-4t2c-avf-ethip4udp- 
 ip4base-iacl50sf-10kflows-mrr 

 [22.59, 22.58, 22.60, 22.61, 22.58, 22.50, 22.57, 22.61, 22.55, 22.47] 

 64b-8t4c-avf-ethip4udp- 
 ip4base-iacl50sf-10kflows-mrr 

 [46.60, 46.31, 46.03, 46.16, 46.19, 46.09, 46.31, 46.08, 45.97, 46.30]

2n1l-100ge2p1e810cq-avf-ethip4udp-ip4base-iacl50sl-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
 ip4base-iacl50sl-10kflows-mrr 

 [10.10, 9.93, 10.09, 9.92, 9.72, 9.98, 9.98, 9.79, 10.14, 10.16] 

 64b-4t2c-avf-ethip4udp- 
 ip4base-iacl50sl-10kflows-mrr 

 [19.12, 18.95, 18.16, 18.64, 18.69, 18.85, 18.73, 18.86, 18.35, 18.47] 

 64b-8t4c-avf-ethip4udp- 
 ip4base-iacl50sl-10kflows-mrr 

 [26.26, 26.26, 25.85, 25.94, 25.89, 25.74, 25.75, 26.17, 25.83, 26.07]

2n1l-100ge2p1e810cq-avf-ethip4udp-ip4base-oacl50sf-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
 ip4base-oacl50sf-10kflows-mrr 

 [10.88, 10.87, 10.92, 10.92, 10.85, 10.90, 10.84, 10.91, 10.87, 10.87] 

 64b-4t2c-avf-ethip4udp- 
 ip4base-oacl50sf-10kflows-mrr 

 [21.76, 21.70, 21.81, 21.76, 21.54, 21.64, 21.81, 21.62, 21.72, 21.63] 

 64b-8t4c-avf-ethip4udp- 
 ip4base-oacl50sf-10kflows-mrr 

 [43.74, 43.79, 43.76, 43.63, 43.52, 43.58, 43.52, 43.73, 43.55, 43.58]

2n1l-100ge2p1e810cq-avf-ethip4udp-ip4base-oacl50sl-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
 ip4base-oacl50sl-10kflows-mrr 

 [9.10, 9.75, 9.14, 9.12, 9.13, 9.16, 9.12, 9.13, 9.26, 9.13] 

 64b-4t2c-avf-ethip4udp- 
 ip4base-oacl50sl-10kflows-mrr 

 [18.26, 18.20, 18.21, 18.11, 18.15, 18.17, 18.19, 18.16, 18.14, 18.11] 

 64b-8t4c-avf-ethip4udp- 
 ip4base-oacl50sl-10kflows-mrr 

 [27.61, 32.53, 32.77, 28.87, 32.99, 35.09, 32.92, 30.94, 28.15, 30.07]

2n1l-100ge2p1e810cq-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4-ip4base-mrr 

 [16.70, 16.69, 16.68, 16.69, 16.67, 16.67, 16.69, 16.69, 16.69, 16.68] 

 64b-4t2c-ethip4-ip4base-mrr 

 [32.29, 32.22, 32.25, 32.20, 32.20, 32.22, 32.22, 32.24, 32.22, 32.22] 

 64b-8t4c-ethip4-ip4base-mrr 

 [60.90, 60.94, 60.97, 60.99, 60.92, 60.86, 60.89, 60.92, 60.88, 60.91]

2n1l-100ge2p1e810cq-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c- 
 ethip4-ip4scale20k-mrr 

 [14.07, 13.98, 14.08, 13.98, 14.00, 14.00, 13.94, 13.98, 14.03, 13.97] 

 64b-4t2c- 
 ethip4-ip4scale20k-mrr 

 [27.82, 27.77, 27.88, 27.76, 27.79, 27.83, 27.83, 27.74, 27.80, 27.76] 

 64b-8t4c- 
 ethip4-ip4scale20k-mrr 

 [54.53, 54.28, 54.53, 54.60, 54.57, 54.53, 54.44, 54.46, 54.46, 54.45]

2n1l-100ge2p1e810cq-ethip4-ip4scale20k-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-E810CQ.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4- 
 ip4scale20k-rnd-mrr 

 [14.15, 14.13, 14.05, 14.11, 14.08, 14.09, 14.16, 14.12, 14.09, 14.04] 

 64b-4t2c-ethip4- 
 ip4scale20k-rnd-mrr 

 [28.28, 28.23, 28.38, 28.40, 28.39, 28.55, 28.46, 28.39, 28.34, 28.44] 

 64b-8t4c-ethip4- 
 ip4scale20k-rnd-mrr 

 [54.80, 54.46, 54.67, 54.80, 54.75, 54.70, 54.78, 54.74, 54.86, 54.77]