.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


ip6 tunnels
```````````

lisp
''''

2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy
............................................

2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy
............................................

*ip6-lispgpe-ip4 encapsulation test cases*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4 on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
*[Cfg] DUT configuration:* DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.
*[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy.csv}


2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy
............................................

2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy
............................................

*ip6-lispgpe-ip6 encapsulation test cases*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
*[Cfg] DUT configuration:* DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.
*[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.csv}