3n-tsh-x520

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-2t2c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  5.19       5.57 
2. 5.25 5.62

3. 27 43 67 30 42 51
4. 73 107 124 70 100 119
5. 135 170 185 151 177 202

 64b-4t4c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  5.84       6.26 
2. 5.98 6.41

3. 31 45 57 29 40 46
4. 58 78 92 57 81 94
5. 98 115 131 99 116 130

10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  4.26       4.56 
2. 4.30 4.61

3. 24 50 65 24 46 53
4. 44 75 96 55 87 98
5. 161 185 206 171 196 216

 64b-2t2c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  5.82       6.24 
2. 5.85 6.27

3. 25 34 42 26 37 45
4. 51 74 85 54 78 98
5. 116 135 153 122 144 163

 64b-4t4c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  5.75       6.16 
2. 5.98 6.41

3. 26 37 45 25 34 41
4. 47 59 69 46 68 77
5. 80 95 108 81 97 110