3n-hsw-xl710

40ge2p1xl710-dot1q-ip6base-ndrpdr

RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 are tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c-dot1q-ip6base-ndrpdr 

 1.  8.93       7.29 
2. 9.07 7.40

3. 24 48 85 24 54 77
4. 34 45 57 37 58 74
5. 50 62 75 51 62 73

 78b-2t2c-dot1q-ip6base-ndrpdr 

 1. 17.36      14.17 
2. 17.62 14.38

3. 27 52 72 30 46 64
4. 23 29 34 23 30 34
5. 35 43 47 35 44 49

 1518b-1t1c- 
dot1q-ip6base-ndrpdr

 1.  3.87      47.79 
2. 3.95 48.76

3. 26 53 80 25 54 77
4. 28 44 59 28 44 59
5. 43 56 68 43 55 63

 1518b-2t2c- 
dot1q-ip6base-ndrpdr

 1.  3.93      48.51 
2. 3.95 48.76

3. 25 39 77 26 54 76
4. 33 47 63 27 45 55
5. 41 56 65 33 42 48

 9000b-1t1c- 
dot1q-ip6base-ndrpdr

 1.  0.66      47.97 
2. 0.67 48.46

3. 39 45 90 40 61 92
4. 40 61 70 48 81 99
5. 62 117 130 72 97 122

 imix-1t1c-dot1q-ip6base-ndrpdr 

 1.  7.36      22.24 
2. 7.45 22.52

 imix-2t2c-dot1q-ip6base-ndrpdr 

 1. 14.35      43.36 
2. 14.53 43.92

40ge2p1xl710-ethip6-ip6base-adlalwlistbase-ndrpdr

RFC2544: Pkt throughput IPv6 allowlist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 ADL security allowlist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1.  9.01       7.06 
2. 9.10 7.13

3. 25 59 92 24 49 74
4. 33 46 61 33 52 71
5. 50 62 70 55 66 80

 78b-2t2c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1. 16.64      13.05 
2. 16.81 13.18

3. 29 47 71 35 60 80
4. 23 30 36 26 34 43
5. 33 40 46 34 42 46

 1518b-1t1c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1.  3.92      48.27 
2. 3.94 48.51

3. 26 36 57 27 47 78
4. 32 46 63 33 54 72
5. 35 41 46 38 45 53

 1518b-2t2c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1.  3.94      48.51 
2. 3.96 48.76

3. 25 43 77 25 36 59
4. 28 41 52 31 46 63
5. 38 47 54 36 44 50

 9000b-1t1c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1.  0.67      48.03 
2. 0.67 48.27

3. 39 42 72 38 41 45
4. 41 68 109 44 71 97
5. 62 72 87 66 76 85

 imix-1t1c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1.  9.07      27.11 
2. 9.12 27.27

 imix-2t2c-ethip6- 
ip6base-adlalwlistbase-ndrpdr

 1. 14.90      44.55 
2. 16.30 48.76

40ge2p1xl710-ethip6-ip6base-iacldstbase-ndrpdr

RFC2544: Pkt throughput IPv6 iAcl whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1.  8.98       7.04 
2. 9.12 7.15

3. 27 57 81 24 44 57
4. 33 45 56 37 52 76
5. 57 71 80 62 76 86

 78b-2t2c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1. 15.65      12.27 
2. 15.88 12.45

3. 32 51 78 34 52 63
4. 23 30 35 24 33 42
5. 31 38 44 30 37 44

 1518b-1t1c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1.  3.90      48.03 
2. 3.94 48.51

3. 26 40 54 26 45 66
4. 28 48 70 32 47 60
5. 40 51 57 44 56 62

 1518b-2t2c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1.  3.92      48.27 
2. 3.94 48.51

3. 25 52 59 26 47 82
4. 29 42 53 31 48 69
5. 33 40 46 29 37 43

 9000b-1t1c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1.  0.65      46.76 
2. 0.64 46.23

3. 39 43 61 39 66 93
4. 41 52 69 42 70 97
5. 83 104 122 57 68 97

 imix-1t1c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1.  8.99      26.90 
2. 9.15 27.37

 imix-2t2c-ethip6- 
ip6base-iacldstbase-ndrpdr

 1. 14.90      44.55 
2. 16.30 48.76

40ge2p1xl710-ethip6-ip6base-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c-ethip6-ip6base-ndrpdr 

 1. 10.72       8.40 
2. 10.88 8.53

3. 28 57 78 24 54 80
4. 37 51 67 36 52 64
5. 51 62 73 52 62 72

 78b-2t2c-ethip6-ip6base-ndrpdr 

 1. 21.79      17.08 
2. 22.01 17.25

3. 32 50 68 25 38 51
4. 22 28 33 22 27 32
5. 33 41 48 32 39 45

 1518b-1t1c- 
ethip6-ip6base-ndrpdr

 1.  3.92      48.27 
2. 3.96 48.76

3. 26 55 76 27 44 76
4. 28 44 61 29 47 57
5. 41 60 67 33 39 44

 1518b-2t2c- 
ethip6-ip6base-ndrpdr

 1.  3.92      48.27 
2. 3.94 48.51

3. 26 38 74 25 29 49
4. 29 46 58 27 51 69
5. 35 44 53 32 39 49

 9000b-1t1c- 
ethip6-ip6base-ndrpdr

 1.  0.65      47.07 
2. 0.67 48.51

3. 39 73 105 38 57 89
4. 40 63 92 42 80 114
5. 76 106 126 55 64 81

 imix-1t1c- 
ethip6-ip6base-ndrpdr

 1. 10.74      32.12 
2. 10.93 32.69

 imix-2t2c- 
ethip6-ip6base-ndrpdr

 1. 14.90      44.55 
2. 16.30 48.76

40ge2p1xl710-ethip6-ip6scale200k-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c- 
ethip6-ip6scale200k-ndrpdr

 1.  7.58       5.94 
2. 7.85 6.16

3. 36 59 89 30 47 64
4. 37 52 65 36 52 66
5. 54 75 121 52 77 134

 78b-2t2c- 
ethip6-ip6scale200k-ndrpdr

 1. 15.41      12.09 
2. 15.86 12.43

3. 33 57 87 38 61 79
4. 28 36 44 30 36 47
5. 43 56 71 42 57 76

 1518b-1t1c- 
ethip6-ip6scale200k-ndrpdr

 1.  3.96      48.76 
2. 3.96 48.76

3. 32 46 74 32 56 79
4. 28 37 47 30 42 55
5. 37 39 42 37 40 42

 1518b-2t2c- 
ethip6-ip6scale200k-ndrpdr

 1.  3.96      48.76 
2. 3.96 48.76

3. 31 46 77 30 49 62
4. 29 45 59 28 44 55
5. 36 39 40 36 38 40

 9000b-1t1c- 
ethip6-ip6scale200k-ndrpdr

 1.  0.68      48.76 
2. 0.68 48.76

3. 49 58 71 48 69 91
4. 54 76 106 54 76 82
5. 77 83 88 75 82 87

 imix-1t1c- 
ethip6-ip6scale200k-ndrpdr

 1.  6.20      18.53 
2. 6.46 19.31

 imix-2t2c- 
ethip6-ip6scale200k-ndrpdr

 1. 15.12      45.22 
2. 16.30 48.76

40ge2p1xl710-ethip6-ip6scale20k-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c- 
ethip6-ip6scale20k-ndrpdr

 1.  9.41       7.37 
2. 9.55 7.49

3. 31 61 83 33 60 87
4. 36 52 65 36 49 64
5. 52 62 73 54 65 78

 78b-2t2c- 
ethip6-ip6scale20k-ndrpdr

 1. 19.12      14.99 
2. 19.34 15.16

3. 34 54 76 36 60 82
4. 27 35 37 26 35 38
5. 34 44 50 34 43 50

 1518b-1t1c- 
ethip6-ip6scale20k-ndrpdr

 1.  3.96      48.76 
2. 3.96 48.76

3. 32 36 50 32 51 73
4. 30 39 56 30 38 52
5. 36 39 41 36 39 41

 1518b-2t2c- 
ethip6-ip6scale20k-ndrpdr

 1.  3.96      48.76 
2. 3.96 48.76

3. 32 41 56 38 59 84
4. 27 36 48 28 38 54
5. 36 38 40 35 38 40

 9000b-1t1c- 
ethip6-ip6scale20k-ndrpdr

 1.  0.66      47.31 
2. 0.68 48.76

3. 49 63 101 47 65 81
4. 55 76 105 53 72 92
5. 76 82 86 75 82 88

 imix-1t1c- 
ethip6-ip6scale20k-ndrpdr

 1.  8.84      26.45 
2. 9.02 26.99

 imix-2t2c- 
ethip6-ip6scale20k-ndrpdr

 1. 16.30      48.76 
2. 16.30 48.76

40ge2p1xl710-ethip6-ip6scale2m-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c- 
ethip6-ip6scale2m-ndrpdr

 1.  6.51       5.10 
2. 6.74 5.29

3. 32 54 82 30 59 89
4. 36 50 65 38 53 67
5. 62 78 95 59 76 92

 78b-2t2c- 
ethip6-ip6scale2m-ndrpdr

 1. 13.42      10.52 
2. 13.94 10.93

3. 39 63 84 36 57 84
4. 35 46 56 36 46 55
5. 52 65 77 52 64 76

 1518b-1t1c- 
ethip6-ip6scale2m-ndrpdr

 1.  3.96      48.76 
2. 3.96 48.76

3. 33 48 67 30 52 85
4. 31 39 52 31 43 55
5. 37 40 43 38 41 43

 1518b-2t2c- 
ethip6-ip6scale2m-ndrpdr

 1.  3.96      48.76 
2. 3.96 48.76

3. 33 60 88 33 55 69
4. 30 44 63 28 40 62
5. 37 39 41 36 39 40

 9000b-1t1c- 
ethip6-ip6scale2m-ndrpdr

 1.  0.68      48.76 
2. 0.68 48.76

3. 49 56 89 47 54 89
4. 56 76 94 54 71 80
5. 77 83 88 77 85 90

 imix-1t1c- 
ethip6-ip6scale2m-ndrpdr

 1.  5.02      15.02 
2. 5.36 16.04

 imix-2t2c- 
ethip6-ip6scale2m-ndrpdr

 1.  9.07      27.12 
2. 16.30 48.76