3n-tsh-x520

10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain and MAC learning enabled. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 dot1q-l2bdbasemaclrn-ndrpdr 

 1.  4.52       3.03 
 2.  4.54       3.05 
  
 3.   26   51   67        26   56   92  
 4.   52   61   69        92  110  122  
 5.  152  177  199       165  187  209  

 64b-2t2c- 
 dot1q-l2bdbasemaclrn-ndrpdr 

 1.  6.44       4.33 
 2.  6.61       4.44 
  
 3.   25   42   72        27   38   51  
 4.   50   77   87        46   66   74  
 5.   89  110  124        87  102  114  

 64b-4t4c- 
 dot1q-l2bdbasemaclrn-ndrpdr 

 1.  6.76       4.54 
 2.  7.89       5.30 
  
 3.   26   59   65        26   30   34  
 4.   43   63   71        44   61   71  
 5.   62   75   87        64   78   88

10ge2p1x520-dot1q-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-dot1q-l2xcbase-ndrpdr 

 1.  5.32       3.57 
 2.  5.37       3.61 
  
 3.   23   40   52        23   37   47  
 4.   46   70   83        48   73   88  
 5.  129  145  162       141  160  177  

 64b-2t2c-dot1q-l2xcbase-ndrpdr 

 1.  6.55       4.40 
 2.  7.50       5.04 
  
 3.   23   52   58        23   48   60  
 4.   46   64   70        40   59   69  
 5.   74   89  102        72   84  101  

 64b-4t4c-dot1q-l2xcbase-ndrpdr 

 1.  5.25       3.53 
 2.  7.87       5.29 
  
 3.   23   33   38        23   25   27  
 4.   36   51   59        35   49   56  
 5.   57   68   79        52   63   72

10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr 

 1.  3.25       2.18 
 2.  3.28       2.20 
  
 3.   25   56   76        26   57   63  
 4.   52   91  108        52   75   93  
 5.   90  108  125        87  106  128  

 64b-2t2c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr 

 1.  4.55       3.06 
 2.  4.64       3.12 
  
 3.   25   27   31        26   27   56  
 4.   27   28   30        52   60   68  
 5.   74   94  106        74   92  105  

 64b-4t4c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr 

 1.  6.01       4.04 
 2.  7.79       5.24 
  
 3.   26   28   30        26   59   66  
 4.   49   66   77        47   63   75  
 5.   76   88  101        72   88  104

10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr 

 1.  3.10       2.08 
 2.  3.11       2.09 
  
 3.   26   55   62        27   46   59  
 4.   47   70   77        43   63   80  
 5.   98  123  142        99  126  144  

 64b-2t2c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr 

 1.  4.33       2.91 
 2.  4.67       3.14 
  
 3.   25   69   83        26   50   70  
 4.   46   55   61        39   60   77  
 5.   73   93  103        65   79   94  

 64b-4t4c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr 

 1.  7.02       4.72 
 2.  7.95       5.34 
  
 3.   26   27   29        30   51   58  
 4.   50   70   82        46   64   76  
 5.   79   94  105        75   95  110

10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-ndrpdr 

 1.  2.03       1.36 
 2.  2.03       1.36 
  
 3.   25   58   89        26   69   79  
 4.   49  100  118        59   94  104  
 5.  127  166  185       124  160  185  

 64b-2t2c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-ndrpdr 

 1.  3.56       2.39 
 2.  3.58       2.40 
  
 3.   25   43   55        25   48   65  
 4.   38   94  104        46   82   93  
 5.   80  111  124        79  104  121  

 64b-4t4c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-ndrpdr 

 1.  5.68       3.82 
 2.  7.11       4.78 
  
 3.   26   45   66        26   37   50  
 4.   47   71   77        49   69   80  
 5.  102  128  151       121  156  187

10ge2p1x520-eth-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdbasemaclrn-ndrpdr 

 1.  5.27       3.54 
 2.  5.30       3.56 
  
 3.   25   51   68        25   44   56  
 4.   69  103  117        61   90  109  
 5.  130  146  170       136  156  180  

 64b-2t2c- 
 eth-l2bdbasemaclrn-ndrpdr 

 1.  7.02       4.72 
 2.  7.20       4.84 
  
 3.   25   39   45        25   44   59  
 4.   45   57   63        45   67   76  
 5.   76   88  100        79   93  103  

 64b-4t4c- 
 eth-l2bdbasemaclrn-ndrpdr 

 1.  3.05       2.05 
 2.  7.91       5.31 
  
 3.   25   26   28        26   47   54  
 4.   45   61   74        38   56   70  
 5.   65   79   87        65   77   88

10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr 

 1.  3.12       2.10 
 2.  3.15       2.12 
  
 3.   26   60   83        27   59   66  
 4.   46  100  107        68   82   92  
 5.  111  142  179       111  147  187  

 64b-2t2c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr 

 1.  4.26       2.86 
 2.  4.39       2.95 
  
 3.   26   34   82        26   34   42  
 4.   68   90   97        29   39   52  
 5.   78  101  115        67   88   98  

 64b-4t4c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr 

 1.  4.86       3.27 
 2.  7.65       5.14 
  
 3.   26   28   29        27   42   52  
 4.   43   67   73        42   60   69  
 5.   88  102  113        70   97  113

10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr 

 1.  2.98       2.00 
 2.  3.01       2.02 
  
 3.   26   47   57        27   44   98  
 4.   46   81   95        47   68   84  
 5.  101  121  148        95  126  149  

 64b-2t2c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr 

 1.  4.47       3.01 
 2.  4.52       3.04 
  
 3.   25   35   47        26   43   55  
 4.   74   90   96        30   37   48  
 5.   76   94  103        76   94  105  

 64b-4t4c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr 

 1.  6.25       4.20 
 2.  7.86       5.28 
  
 3.   27   60   66        27   30   38  
 4.   49   68   76        50   69   81  
 5.   83   98  113        77   90  106

10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 50k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdscale100kmaclrn-ndrpdr 

 1.  4.03       2.71 
 2.  4.07       2.74 
  
 3.   25   33   40        25   53   70  
 4.   75  112  128        68  107  138  
 5.  151  193  223       163  202  235  

 64b-2t2c- 
 eth-l2bdscale100kmaclrn-ndrpdr 

 1.  5.92       3.98 
 2.  5.98       4.02 
  
 3.   25   40   45        25   73   94  
 4.   40   81   98        61   91  100  
 5.   97  121  137        94  111  127  

 64b-4t4c- 
 eth-l2bdscale100kmaclrn-ndrpdr 

 1.  4.84       3.26 
 2.  7.87       5.29 
  
 3.   25   27   29        26   55   59  
 4.   44   64   77        44   58   72  
 5.   72   84   97        67   86  100

10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdscale10kmaclrn-ndrpdr 

 1.  4.35       2.92 
 2.  4.40       2.95 
  
 3.   25   52   68        25   40   91  
 4.   46   74   95        82  111  129  
 5.  132  158  180       139  168  194  

 64b-2t2c- 
 eth-l2bdscale10kmaclrn-ndrpdr 

 1.  6.10       4.10 
 2.  6.16       4.14 
  
 3.   24   27   37        25   68   76  
 4.   57   81   91        62   88   95  
 5.   84  104  121        87  104  120  

 64b-4t4c- 
 eth-l2bdscale10kmaclrn-ndrpdr 

 1.  4.56       3.07 
 2.  7.94       5.34 
  
 3.   26   51   61        25   32   46  
 4.   43   63   72        37   58   65  
 5.   67   83   95        67   82   92

10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdscale1mmaclrn-ndrpdr 

 1.  2.78       1.87 
 2.  2.79       1.88 
  
 3.   25   52   86        25   76  107  
 4.   64  133  178        70  110  160  
 5.  162  876 1338       144  886 1353  

 64b-2t2c- 
 eth-l2bdscale1mmaclrn-ndrpdr 

 1.  4.47       3.01 
 2.  4.63       3.11 
  
 3.   25   45   85        25   57   77  
 4.   30   61   82        34   46   63  
 5.  176  818 1207        96  129  158  

 64b-4t4c- 
 eth-l2bdscale1mmaclrn-ndrpdr 

 1.  4.53       3.04 
 2.  6.69       4.49 
  
 3.   26   53   82        26   52   60  
 4.   57   85  104        52   71   82  
 5.   92  149  213        78   99  117

10ge2p1x520-eth-l2patch-ndrpdr

RFC2544: Pkt throughput L2patch test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 patch.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 patch DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header,IPv4 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2patch-ndrpdr 

 1.  7.73       5.20 
 2.  7.81       5.25 
  
 3.   19   21   25        19   21   23  
 4.   45   64   74        45   63   72  
 5.   82   97  105        89  105  115  

 64b-2t2c-eth-l2patch-ndrpdr 

 1.  4.87       3.27 
 2.  7.79       5.24 
  
 3.   19   22   24        19   21   42  
 4.   30   50   55        31   44   50  
 5.   52   62   75        55   68   76  

 64b-4t4c-eth-l2patch-ndrpdr 

 1.  2.27       1.52 
 2.  7.85       5.28 
  
 3.   19   20   20        19   20   21  
 4.   26   46   53        26   40   47  
 5.   47   60   71        46   58   69

10ge2p1x520-eth-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2xcbase-ndrpdr 

 1.  6.36       4.28 
 2.  6.43       4.32 
  
 3.   22   42   53        22   35   47  
 4.   50   75   83        52   71   90  
 5.  120  138  151       126  146  162  

 64b-2t2c-eth-l2xcbase-ndrpdr 

 1.  4.29       2.88 
 2.  7.78       5.23 
  
 3.   21   23   29        22   23   26  
 4.   43   62   70        44   59   69  
 5.   60   71   80        63   72   79  

 64b-4t4c-eth-l2xcbase-ndrpdr 

 1.  3.53       2.38 
 2.  7.90       5.31 
  
 3.   21   23   24        22   23   26  
 4.   31   51   58        31   48   54  
 5.   51   60   68        51   60   68