3n-tsh-x520

10ge2p1x520-dot1q–ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with 100 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  2.73       1.84 
2. 2.75 1.85

3. 30 74 124 30 83 113
4. 92 146 175 85 138 173
5. 258 318 357 283 337 364

 64b-2t2c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  4.21       2.83 
2. 4.23 2.84

3. 30 88 98 30 40 47
4. 67 116 136 68 112 124
5. 128 156 183 127 152 178

 64b-4t4c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  7.46       5.01 
2. 7.80 5.24

3. 31 71 79 31 46 53
4. 67 89 101 64 82 94
5. 125 141 159 123 141 158

10ge2p1x520-dot1q–ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with 1 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  3.46       2.32 
2. 3.48 2.34

3. 30 76 90 30 106 137
4. 92 140 149 88 129 165
5. 225 261 276 260 293 308

 64b-2t2c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  5.21       3.50 
2. 5.32 3.57

3. 29 71 87 30 56 68
4. 75 102 110 65 88 93
5. 104 120 133 108 124 136

 64b-4t4c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  6.00       4.03 
2. 7.67 5.15

3. 31 57 69 31 48 59
4. 59 76 88 60 79 87
5. 82 98 108 86 97 114

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  0.02       0.01 
2. 3.62 2.43

3. 38 52 64 40 54 72
4. 84 112 128 90 115 135
5. 217 248 278 252 282 307

 64b-2t2c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  5.31       3.57 
2. 5.39 3.62

3. 29 78 97 30 57 69
4. 52 99 117 63 92 106
5. 98 116 130 99 113 126

 64b-4t4c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  4.85       3.26 
2. 7.80 5.24

3. 30 31 33 31 42 49
4. 56 75 83 55 75 87
5. 86 96 105 88 97 105

10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  4.11       2.76 
2. 4.15 2.79

3. 28 49 73 27 55 64
4. 79 121 140 81 125 151
5. 189 213 231 207 236 262

 64b-2t2c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  5.93       3.99 
2. 6.05 4.07

3. 26 62 73 27 34 37
4. 47 85 95 59 82 94
5. 96 118 132 97 113 124

 64b-4t4c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  7.20       4.84 
2. 7.76 5.22

3. 27 52 63 27 29 33
4. 48 72 79 42 60 66
5. 77 86 95 65 77 97