3n-skx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-2t1c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.84      47.28 
2. 3.84 47.28

 1518b-4t2c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.44      42.37 
2. 3.48 42.79

 9000b-2t1c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  0.66      47.77 
2. 0.67 48.01

 imix-2t1c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  7.00      20.92 
2. 8.13 24.31

 imix-4t2c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  7.19      21.52 
2. 8.15 24.38

 imix-8t4c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  7.09      21.20 
2. 8.16 24.39

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-2t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.84      47.28 
2. 3.84 47.28

 1518b-4t2c- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.57      43.90 
2. 3.59 44.12

 9000b-2t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  0.65      47.07 
2. 0.67 48.02

 imix-2t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  6.67      19.95 
2. 6.74 20.15

 imix-4t2c- 
ethip6lispip4-ip6base-ndrpdr

 1.  6.87      20.56 
2. 6.94 20.77

 imix-8t4c- 
ethip6lispip4-ip6base-ndrpdr

 1.  7.05      21.08 
2. 7.12 21.29