3n-hsw-xl710

40ge2p1xl710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XL710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.70      45.58 
2. 3.76 46.27

 1518b-2t2c- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.84      47.28 
2. 3.84 47.28

 9000b-1t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  0.67      48.01 
2. 0.67 48.25

 imix-1t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  5.34      15.97 
2. 5.37 16.05

 imix-2t2c- 
ethip6lispip4-ip6base-ndrpdr

 1.  9.73      29.10 
2. 9.78 29.25