3n-tsh-x520

10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6ip6- 
ip6base-srv6enc1sid-mrr

 [3.78, 3.86, 3.85, 3.85, 3.85, 3.85, 3.85, 3.85, 3.85, 3.86] 

 78b-2t2c-ethip6ip6- 
ip6base-srv6enc1sid-mrr

 [5.44, 5.43, 5.44, 5.44, 5.43, 5.44, 5.43, 5.43, 5.44, 5.44] 

 78b-4t4c-ethip6ip6- 
ip6base-srv6enc1sid-mrr

 [5.28, 5.28, 5.28, 5.29, 5.28, 5.28, 5.28, 5.28, 5.28, 5.28] 

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6srhip6- 
ip6base-srv6enc2sids-mrr

 [3.32, 3.32, 3.32, 3.33, 3.33, 3.32, 3.33, 3.33, 3.32, 3.33] 

 78b-2t2c-ethip6srhip6- 
ip6base-srv6enc2sids-mrr

 [5.21, 5.22, 5.23, 5.22, 5.22, 5.21, 5.22, 5.22, 5.22, 5.22] 

 78b-4t4c-ethip6srhip6- 
ip6base-srv6enc2sids-mrr

 [5.21, 5.21, 5.21, 5.21, 5.21, 5.21, 5.21, 5.20, 5.21, 5.21] 

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6srhip6- 
ip6base-srv6enc2sids-nodecaps-mrr

 [3.48, 3.48, 3.48, 3.48, 3.48, 3.49, 3.49, 3.48, 3.48, 3.48] 

 78b-2t2c-ethip6srhip6- 
ip6base-srv6enc2sids-nodecaps-mrr

 [5.24, 5.25, 5.25, 5.25, 5.24, 5.25, 5.26, 5.25, 5.25, 5.25] 

 78b-4t4c-ethip6srhip6- 
ip6base-srv6enc2sids-nodecaps-mrr

 [5.20, 5.22, 5.22, 5.22, 5.22, 5.22, 5.22, 5.22, 5.22, 5.21] 

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6srhip6- 
ip6base-srv6proxy-dyn-mrr

 [2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42] 

 78b-2t2c-ethip6srhip6- 
ip6base-srv6proxy-dyn-mrr

 [2.88, 2.88, 2.88, 2.89, 2.89, 2.89, 2.88, 2.89, 2.88, 2.88] 

 78b-4t4c-ethip6srhip6- 
ip6base-srv6proxy-dyn-mrr

 [3.53, 3.52, 3.52, 3.52, 3.51, 3.52, 3.53, 3.52, 3.52, 3.52] 

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6srhip6- 
ip6base-srv6proxy-masq-mrr

 [2.64, 2.65, 2.64, 2.65, 2.65, 2.65, 2.65, 2.65, 2.65, 2.65] 

 78b-2t2c-ethip6srhip6- 
ip6base-srv6proxy-masq-mrr

 [2.95, 2.95, 2.92, 2.94, 2.94, 2.95, 2.94, 2.94, 2.94, 2.93] 

 78b-4t4c-ethip6srhip6- 
ip6base-srv6proxy-masq-mrr

 [3.90, 3.90, 3.91, 3.90, 3.90, 3.90, 3.89, 3.90, 3.90, 3.89] 

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6srhip6- 
ip6base-srv6proxy-stat-mrr

 [2.45, 2.45, 2.45, 2.45, 2.45, 2.45, 2.45, 2.45, 2.45, 2.45] 

 78b-2t2c-ethip6srhip6- 
ip6base-srv6proxy-stat-mrr

 [2.75, 2.75, 2.75, 2.75, 2.75, 2.75, 2.75, 2.76, 2.76, 2.75] 

 78b-4t4c-ethip6srhip6- 
ip6base-srv6proxy-stat-mrr

 [3.48, 3.48, 3.47, 3.47, 3.47, 3.47, 3.46, 3.47, 3.46, 3.47]