3n-tsh-x520¶

10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  3.54       2.77 
 2.  3.69       2.89 
  
 3.   26   76  102        26   46  104  
 4.   47  132  148        55  133  154  
 5.  180  237  266       196  250  289

 78b-2t2c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  5.42       4.25 
 2.  5.42       4.25 
  
 3.   25   85   99        26   83   96  
 4.   75  110  123        76  109  122  
 5.  120  149  179       122  147  173

 78b-4t4c-ethip6ip6- 
 ip6base-srv6enc1sid-ndrpdr

 1.  7.56       5.92 
 2.  7.56       5.92 
  
 3.   26   58   78        26   52   72  
 4.   36   76   90        38   76   93  
 5.   96  114  127        94  112  128

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  3.21       2.52 
 2.  3.23       2.53 
  
 3.   28   76  114        28   52  116  
 4.   74  130  161        74  132  163  
 5.  151  186  236       159  194  245

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  5.08       3.98 
 2.  5.13       4.02 
  
 3.   27   76  119        27   58   96  
 4.   67  130  141        65  126  139  
 5.  142  177  211       142  174  204

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6enc2sids-ndrpdr

 1.  7.04       5.52 
 2.  7.11       5.58 
  
 3.   27   87  107        28   89  100  
 4.   70  108  116        63  107  120  
 5.  123  148  169       125  147  165

10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  3.36       2.63 
 2.  3.38       2.65 
  
 3.   26   78  104        27   71  113  
 4.   49  141  161        49  148  163  
 5.  182  237  272       186  237  272

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  5.03       3.94 
 2.  5.18       4.06 
  
 3.   27  105  137        27   75  130  
 4.   63  120  138        63  131  143  
 5.  140  170  202       137  171  199

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6enc2sids-nodecaps-ndrpdr

 1.  7.25       5.68 
 2.  7.28       5.71 
  
 3.   27   77   85        27   76   94  
 4.   63  109  121        69  108  120  
 5.  112  130  146       114  132  150

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AD - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  2.26       1.77 
 2.  2.35       1.84 
  
 3.   37   58   68        38   59   82  
 4.   77  199  246        81  196  244  
 5.  331  409  439       347  418  466

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  3.12       2.45 
 2.  3.17       2.48 
  
 3.   37   64   80        37   48  196  
 4.   69  179  208        55  173  227  
 5.  251  316  366       230  332  367

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-dyn-ndrpdr

 1.  3.79       2.97 
 2.  3.85       3.02 
  
 3.   38   71  168        37   48  190  
 4.   71  134  182        72  161  213  
 5.  264  299  331       176  224  265

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AM - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  2.35       1.84 
 2.  2.57       2.01 
  
 3.   38  109  143        38   97  147  
 4.   87  181  203        86  184  210  
 5.  330  401  433       349  410  474

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  3.22       2.53 
 2.  3.25       2.55 
  
 3.   38   86  143        37   92  129  
 4.  102  177  210        90  175  247  
 5.  230  290  352       237  299  345

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-masq-ndrpdr

 1.  4.29       3.36 
 2.  4.44       3.48 
  
 3.   38   84  171        37   70  126  
 4.  108  161  183        92  165  217  
 5.  263  303  324       136  162  217

10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr¶

Packet throughput Segment routing over IPv6 dataplane with Static SRv6 proxy test cases

[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

[Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-CNT for IPv6 routing over SRv6.

[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End.AS - for other direction. DUT1 and DUT2 are tested with Intel-X520-DA2.

[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

[Ref] Applicable standard specifications: SRv6 Network Programming - draft 3 and Segment Routing for Service Chaining - internet draft 01.

 Test Name

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR)

 78b-1t1c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  2.35       1.84 
 2.  2.42       1.90

 78b-2t2c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  3.02       2.37 
 2.  3.08       2.42

 78b-4t4c-ethip6srhip6- 
 ip6base-srv6proxy-stat-ndrpdr

 1.  3.91       3.06 
 2.  3.97       3.11