3n-tsh-x520

10ge2p1x520-dot1q-ip4base-ndrpdr

RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q-ip4base-ndrpdr 

 1.  4.72       3.17 
2. 4.77 3.21

3. 23 77 97 23 96 110
4. 44 95 105 47 111 117
5. 182 220 243 191 228 252

 64b-2t2c-dot1q-ip4base-ndrpdr 

 1.  6.69       4.50 
2. 6.79 4.56

3. 23 59 89 23 56 90
4. 43 89 104 40 90 102
5. 106 124 150 105 123 148

 64b-4t4c-dot1q-ip4base-ndrpdr 

 1.  7.96       5.35 
2. 7.96 5.35

3. 23 43 58 23 29 55
4. 32 61 71 27 51 64
5. 63 80 88 64 83 96

10ge2p1x520-ethip4-ip4base-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4-ip4base-ndrpdr 

 1.  5.06       3.40 
2. 5.08 3.41

3. 22 44 100 23 42 92
4. 49 100 107 53 98 109
5. 154 200 228 166 207 240

 64b-2t2c-ethip4-ip4base-ndrpdr 

 1.  6.86       4.61 
2. 6.93 4.66

3. 23 77 95 23 75 94
4. 48 86 97 35 88 104
5. 95 116 147 95 117 143

 64b-4t4c-ethip4-ip4base-ndrpdr 

 1.  7.90       5.31 
2. 7.98 5.36

3. 23 49 60 23 25 51
4. 34 61 71 25 33 54
5. 59 75 85 61 78 89

10ge2p1x520-ethip4-ip4scale200k-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4-ip4scale200k-ndrpdr

 1.  3.85       2.59 
2. 3.89 2.61

3. 23 74 107 23 52 108
4. 39 99 114 25 97 117
5. 106 137 3921 108 137 3893

 64b-2t2c- 
ethip4-ip4scale200k-ndrpdr

 1.  5.83       3.92 
2. 5.92 3.98

3. 23 85 114 23 79 108
4. 55 105 118 55 110 121
5. 113 145 185 122 154 189

 64b-4t4c- 
ethip4-ip4scale200k-ndrpdr

 1.  7.51       5.05 
2. 7.55 5.07

3. 23 49 68 23 37 66
4. 26 58 87 26 56 77
5. 83 102 113 77 98 109

10ge2p1x520-ethip4-ip4scale20k-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4-ip4scale20k-ndrpdr

 1.  4.62       3.10 
2. 4.71 3.17

3. 23 90 111 23 91 103
4. 41 103 111 51 110 116
5. 174 214 239 181 221 252

 64b-2t2c- 
ethip4-ip4scale20k-ndrpdr

 1.  6.22       4.18 
2. 6.22 4.18

3. 23 54 79 23 60 82
4. 52 98 106 49 92 107
5. 103 131 158 107 132 160

 64b-4t4c- 
ethip4-ip4scale20k-ndrpdr

 1.  7.97       5.35 
2. 7.97 5.35

3. 23 43 61 23 24 31
4. 31 61 73 24 28 35
5. 67 86 97 66 86 95

10ge2p1x520-ethip4-ip4scale2m-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4-ip4scale2m-ndrpdr

 1.  3.79       2.55 
2. 3.88 2.60

3. 23 55 96 23 35 95
4. 42 100 117 26 99 119
5. 103 129 148 105 131 155

 64b-2t2c- 
ethip4-ip4scale2m-ndrpdr

 1.  5.75       3.86 
2. 5.87 3.94

3. 23 79 113 23 46 104
4. 61 111 124 61 108 121
5. 123 155 194 120 152 192

 64b-4t4c- 
ethip4-ip4scale2m-ndrpdr

 1.  7.45       5.00 
2. 7.48 5.03

3. 23 49 70 23 40 57
4. 29 64 82 29 64 85
5. 82 98 110 73 96 108

10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-iacl50sf-10kflows-ndrpdr

 1.  3.43       2.31 
2. 3.48 2.34

3. 24 48 103 24 66 115
4. 51 112 130 46 123 144
5. 110 150 201 109 153 172

 64b-2t2c-ethip4udp- 
ip4base-iacl50sf-10kflows-ndrpdr

 1.  4.85       3.26 
2. 4.92 3.31

3. 24 60 75 24 47 62
4. 49 106 127 51 96 119
5. 100 126 153 99 127 137

 64b-4t4c-ethip4udp- 
ip4base-iacl50sf-10kflows-ndrpdr

 1.  7.63       5.13 
2. 7.78 5.23

3. 24 47 72 25 29 70
4. 27 61 80 26 38 65
5. 88 108 116 79 102 119

10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-iacl50sl-10kflows-ndrpdr

 1.  3.28       2.20 
2. 3.29 2.21

3. 24 52 90 24 72 115
4. 52 119 142 47 116 155
5. 116 156 204 114 159 170

 64b-2t2c-ethip4udp- 
ip4base-iacl50sl-10kflows-ndrpdr

 1.  4.92       3.30 
2. 4.99 3.35

3. 24 41 56 24 45 62
4. 44 110 122 48 108 116
5. 92 126 141 92 128 139

 64b-4t4c-ethip4udp- 
ip4base-iacl50sl-10kflows-ndrpdr

 1.  7.63       5.13 
2. 7.94 5.34

3. 24 47 73 25 31 71
4. 33 73 88 26 30 35
5. 91 110 123 77 96 104

10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-nat44-ndrpdr

 1.  2.57       1.72 
2. 3.79 2.55

3. 25 63 99 24 38 47
4. 34 99 134 32 113 132
5. 106 143 2861 107 145 2477

 64b-2t2c-ethip4udp- 
ip4base-nat44-ndrpdr

 1.  1.86       1.25 
2. 5.72 3.84

3. 24 39 78 24 27 42
4. 40 94 109 41 99 109
5. 96 121 136 98 123 137

 64b-4t4c-ethip4udp- 
ip4base-nat44-ndrpdr

 1.  5.17       3.47 
2. 7.11 4.78

3. 24 77 92 24 74 89
4. 62 98 108 47 93 102
5. 111 136 153 94 118 126

10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-oacl50sf-10kflows-ndrpdr

 1.  3.31       2.23 
2. 3.36 2.26

3. 25 53 79 25 73 116
4. 41 115 148 40 144 154
5. 113 150 187 110 151 159

 64b-2t2c-ethip4udp- 
ip4base-oacl50sf-10kflows-ndrpdr

 1.  4.56       3.06 
2. 4.72 3.17

3. 24 85 112 24 95 110
4. 37 112 124 48 119 129
5. 120 134 145 125 139 151

 64b-4t4c-ethip4udp- 
ip4base-oacl50sf-10kflows-ndrpdr

 1.  7.53       5.06 
2. 7.84 5.27

3. 25 46 70 25 30 65
4. 29 63 82 27 35 44
5. 89 110 121 81 100 109

10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-oacl50sl-10kflows-ndrpdr

 1.  3.16       2.12 
2. 3.17 2.13

3. 25 52 96 25 41 109
4. 43 123 164 33 133 150
5. 120 171 222 117 170 183

 64b-2t2c-ethip4udp- 
ip4base-oacl50sl-10kflows-ndrpdr

 1.  4.92       3.31 
2. 4.94 3.32

3. 25 49 69 25 53 68
4. 49 112 126 51 114 123
5. 100 130 145 102 132 145

 64b-4t4c-ethip4udp- 
ip4base-oacl50sl-10kflows-ndrpdr

 1.  7.85       5.27 
2. 7.96 5.35

3. 25 49 75 25 36 73
4. 34 68 80 28 37 66
5. 91 110 123 77 97 105

10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-ndrpdr

 1.  2.03       1.36 
2. 3.19 2.15

3. 24 52 94 24 53 117
4. 51 125 175 53 132 162
5. 118 173 231 115 168 193

 64b-2t2c-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-ndrpdr

 1.  3.13       2.11 
2. 5.01 3.37

3. 24 39 58 24 38 48
4. 55 113 128 43 109 122
5. 99 135 151 94 128 139

 64b-4t4c-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-ndrpdr

 1.  4.60       3.09 
2. 8.01 5.38

3. 25 34 72 24 26 32
4. 38 77 90 34 67 84
5. 88 109 130 76 95 106