3n-tsh-x520

10ge2p1x520-dot1q–ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with 100 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  2.64       1.77 
2. 2.68 1.80

3. 30 90 126 30 82 128
4. 107 161 212 54 132 152
5. 268 348 375 289 365 410

 64b-2t2c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  4.13       2.78 
2. 4.20 2.82

3. 30 74 135 30 69 132
4. 124 165 179 85 168 182
5. 155 203 246 161 208 261

 64b-4t4c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  7.76       5.22 
2. 7.88 5.29

3. 30 58 96 30 45 92
4. 43 86 101 43 58 92
5. 136 158 171 131 158 171

10ge2p1x520-dot1q–ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with 1 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  3.34       2.25 
2. 3.38 2.27

3. 30 88 124 30 80 130
4. 65 141 166 62 149 171
5. 253 299 334 270 315 357

 64b-2t2c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  5.04       3.39 
2. 5.17 3.47

3. 29 88 132 29 62 135
4. 65 130 143 65 133 146
5. 157 198 231 156 193 229

 64b-4t4c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  7.77       5.22 
2. 7.81 5.25

3. 30 56 83 30 38 80
4. 36 72 87 37 50 59
5. 99 117 141 100 119 144

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  3.46       2.33 
2. 3.48 2.34

3. 30 87 118 30 79 119
4. 71 136 164 72 137 166
5. 238 291 324 268 315 352

 64b-2t2c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  5.27       3.54 
2. 5.27 3.54

3. 29 108 126 29 113 130
4. 77 107 123 55 113 123
5. 149 182 215 150 180 210

 64b-4t4c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  7.76       5.21 
2. 7.84 5.27

3. 30 57 82 30 35 63
4. 35 73 86 35 41 70
5. 96 114 138 98 116 140

10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-2t2c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  5.88       3.95 
2. 5.93 3.99

3. 26 72 88 26 58 90
4. 50 88 95 53 93 105
5. 87 105 121 90 110 126

 64b-4t4c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  7.84       5.27 
2. 7.84 5.27

3. 26 47 70 26 28 32
4. 30 64 78 28 34 41
5. 81 97 108 80 97 110