3n-skx-xxv710

25ge2p1xxv710-avf-dot1q-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-dot1q-ip4base-mrr 

 [20.37, 20.10, 21.24, 20.20, 21.22, 20.57, 20.21, 20.64, 20.19, 20.32] 

 64b-4t2c-avf-dot1q-ip4base-mrr 

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

 64b-8t4c-avf-dot1q-ip4base-mrr 

 [37.20, 37.50, 37.50, 37.50, 37.50, 37.39, 37.27, 37.50, 37.50, 37.50] 

25ge2p1xxv710-avf-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4base-mrr

 [24.64, 24.80, 24.67, 24.65, 24.10, 25.56, 25.58, 24.76, 24.59, 24.88] 

 64b-4t2c-avf- 
ethip4-ip4base-mrr

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

 64b-8t4c-avf- 
ethip4-ip4base-mrr

 [36.95, 36.86, 37.30, 37.44, 36.91, 37.13, 37.01, 37.19, 36.87, 36.87] 

25ge2p1xxv710-avf-ethip4-ip4scale200k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale200k-mrr

 [20.78, 20.42, 20.96, 20.39, 21.18, 20.15, 20.37, 20.38, 21.22, 20.81] 

 64b-4t2c-avf- 
ethip4-ip4scale200k-mrr

 [37.46, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

 64b-8t4c-avf- 
ethip4-ip4scale200k-mrr

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.49, 37.50] 

25ge2p1xxv710-avf-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale20k-mrr

 [23.78, 21.57, 21.19, 21.48, 22.27, 21.25, 21.36, 22.66, 21.42, 21.16] 

 64b-4t2c-avf- 
ethip4-ip4scale20k-mrr

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

 64b-8t4c-avf- 
ethip4-ip4scale20k-mrr

 [37.49, 37.50, 37.37, 37.46, 37.50, 37.42, 37.41, 37.50, 37.43, 37.50] 

25ge2p1xxv710-avf-ethip4-ip4scale2m-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale2m-mrr

 [16.19, 17.46, 17.13, 16.32, 16.22, 17.39, 16.42, 16.38, 16.47, 16.46] 

 64b-4t2c-avf- 
ethip4-ip4scale2m-mrr

 [31.08, 30.42, 31.39, 30.48, 30.62, 32.56, 31.57, 30.80, 30.55, 30.48] 

 64b-8t4c-avf- 
ethip4-ip4scale2m-mrr

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

25ge2p1xxv710-avf-ethip4udp-ip4base-iacl50sf-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-iacl50sf-10kflows-mrr

 [14.75, 14.99, 15.13, 14.49, 15.02, 15.36, 15.58, 15.67, 14.70, 14.68] 

 64b-4t2c-avf-ethip4udp- 
ip4base-iacl50sf-10kflows-mrr

 [29.59, 30.12, 30.31, 29.88, 29.83, 30.29, 29.89, 29.88, 29.93, 30.35] 

 64b-8t4c-avf-ethip4udp- 
ip4base-iacl50sf-10kflows-mrr

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

25ge2p1xxv710-avf-ethip4udp-ip4base-iacl50sl-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-iacl50sl-10kflows-mrr

 [12.32, 12.10, 12.49, 12.17, 11.92, 12.66, 11.80, 12.88, 12.32, 12.52] 

 64b-4t2c-avf-ethip4udp- 
ip4base-iacl50sl-10kflows-mrr

 [23.57, 23.66, 22.89, 24.41, 23.68, 23.49, 23.63, 21.91, 23.95, 23.02] 

 64b-8t4c-avf-ethip4udp- 
ip4base-iacl50sl-10kflows-mrr

 [29.57, 28.69, 28.34, 28.96, 28.88, 28.58, 28.72, 28.80, 28.53, 28.73] 

25ge2p1xxv710-avf-ethip4udp-ip4base-nat44-mrr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4udp-ip4base-nat44-mrr

 [12.01, 12.27, 11.86, 12.07, 12.06, 12.18, 12.22, 12.10, 12.12, 12.25] 

 64b-4t2c-avf- 
ethip4udp-ip4base-nat44-mrr

 [12.14, 12.40, 12.25, 12.34, 12.28, 12.29, 12.29, 12.25, 12.28, 12.21] 

 64b-8t4c-avf- 
ethip4udp-ip4base-nat44-mrr

 [12.43, 12.44, 12.48, 12.49, 12.46, 12.51, 12.45, 12.46, 12.51, 12.46] 

25ge2p1xxv710-avf-ethip4udp-ip4base-oacl50sf-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-oacl50sf-10kflows-mrr

 [14.30, 14.55, 15.24, 14.00, 14.61, 14.83, 13.88, 14.36, 13.93, 14.55] 

 64b-4t2c-avf-ethip4udp- 
ip4base-oacl50sf-10kflows-mrr

 [28.01, 29.20, 28.42, 28.66, 28.93, 28.89, 28.88, 28.57, 28.48, 28.71] 

 64b-8t4c-avf-ethip4udp- 
ip4base-oacl50sf-10kflows-mrr

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

25ge2p1xxv710-avf-ethip4udp-ip4base-oacl50sl-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-oacl50sl-10kflows-mrr

 [12.30, 11.87, 12.10, 12.44, 12.63, 13.61, 11.65, 12.88, 12.64, 12.14] 

 64b-4t2c-avf-ethip4udp- 
ip4base-oacl50sl-10kflows-mrr

 [22.68, 22.49, 22.57, 22.61, 22.59, 22.85, 22.75, 25.00, 22.40, 23.28] 

 64b-8t4c-avf-ethip4udp- 
ip4base-oacl50sl-10kflows-mrr

 [28.40, 27.79, 27.94, 27.84, 28.04, 28.68, 27.77, 28.89, 28.45, 28.84] 

25ge2p1xxv710-avf-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-mrr

 [11.24, 11.35, 11.22, 10.83, 10.84, 11.17, 10.82, 11.54, 10.84, 10.77] 

 64b-4t2c-avf-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-mrr

 [20.90, 20.66, 20.47, 20.76, 20.93, 20.75, 21.36, 20.84, 20.83, 21.20] 

 64b-8t4c-avf-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-mrr

 [37.41, 37.46, 37.17, 37.08, 37.49, 37.16, 37.22, 37.37, 37.43, 37.00] 

25ge2p1xxv710-dot1q-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-dot1q-ip4base-mrr 

 [17.75, 18.10, 17.37, 16.79, 16.58, 16.95, 16.58, 17.79, 17.82, 17.25] 

 64b-4t2c-dot1q-ip4base-mrr 

 [33.36, 32.96, 32.93, 33.35, 32.94, 33.18, 33.23, 33.23, 32.91, 33.11] 

 64b-8t4c-dot1q-ip4base-mrr 

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

25ge2p1xxv710-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4-ip4base-mrr 

 [19.82, 19.66, 19.63, 19.66, 19.83, 19.70, 19.70, 19.70, 20.09, 19.70] 

 64b-4t2c-ethip4-ip4base-mrr 

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

 64b-8t4c-ethip4-ip4base-mrr 

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

25ge2p1xxv710-ethip4-ip4scale2m-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4-ip4scale2m-mrr 

 [13.76, 13.87, 14.71, 15.26, 13.79, 14.04, 14.61, 13.81, 13.99, 13.98] 

 64b-4t2c-ethip4-ip4scale2m-mrr 

 [26.05, 26.61, 26.90, 26.67, 26.26, 26.15, 25.95, 26.22, 25.90, 26.23] 

 64b-8t4c-ethip4-ip4scale2m-mrr 

 [37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50, 37.50] 

25ge2p1xxv710-ethip4udp-ip4base-nat44-mrr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4udp- 
ip4base-nat44-mrr

 [10.80, 10.79, 10.83, 10.81, 10.81, 10.88, 10.82, 10.83, 10.83, 10.82] 

 64b-4t2c-ethip4udp- 
ip4base-nat44-mrr

 [10.80, 10.96, 10.97, 10.96, 10.81, 10.84, 10.97, 10.96, 10.80, 10.93] 

 64b-8t4c-ethip4udp- 
ip4base-nat44-mrr

 [10.95, 10.96, 10.93, 10.96, 10.96, 10.96, 10.94, 10.97, 10.93, 10.98]