.. |br| raw:: html
.. |prein| raw:: html


.. |preout| raw:: html

    
l2bd ```` eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev '''''''''''''''''''''''''''''''''''''' **L2BD with IEEE 802.1Q and GBP test cases** - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1 . - **[Cfg] DUT configuration:** DUT1 is configured with: 2 VLAN subinterfaces (VID 200 and 300), 1 L2 BD with the 2 VLAN subinterfaces and a BVI, 1 GBP L3 RD, 1 GBP L2 BD with the L2 BD, 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD, 2 GBP external EP in EPG-1, 2 external subnets with sclass 200 and 300, Contracts allowing full communications between the 2 external subnets. DUT1 tested with virtual with VF enabled. - **[Ver] TG verification:** Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. - **[Ref] Applicable standard specifications:** IEEE 802.1q. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_configuration_ubuntu_eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.csv} eth2p-avf-dot1qip4-l2bdbasemaclrn-dev ''''''''''''''''''''''''''''''''''''' **IPv4 routing with IEEE 802.1Q test cases** - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on links between TG-DUT1. - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 is tested with virtual. - **[Ver] TG verification:** Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. - **[Ref] Applicable standard specifications:** IEEE 802.1q. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_configuration_ubuntu_eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_eth2p-avf-dot1qip4-l2bdbasemaclrn-dev.csv} eth2p-ethipv4-l2bdbasemaclrn-dev '''''''''''''''''''''''''''''''' **L2 bridge-domain test cases** - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. Both apply to all links. - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-domain switching. - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses. - **[Ref] Applicable standard specifications:** RFC792 .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_configuration_ubuntu_eth2p-ethipv4-l2bdbasemaclrn-dev.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/test_configuration/vpp_device_configuration_ubuntu/vpp_device_configuration_ubuntu_eth2p-ethipv4-l2bdbasemaclrn-dev.csv}