3n-skx-xxv710¶
25ge2p1xxv710-avf-dot1q–ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-mrr¶
RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with 100 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-dot1q–ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-mrr¶
RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with 1 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-mrr¶
RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4vxlan-l2xcbase-mrr¶
RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-dot1q–ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-mrr¶
RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with 100 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-dot1q–ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-mrr¶
RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with 1 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4vxlan-l2bdbasemaclrn-mrr¶
RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4vxlan-l2xcbase-mrr¶
RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|