KVM VMs vhost-user¶
QEMU is used for KVM VM vhost-user testing enviroment. By default, standard QEMU version is used, preinstalled from OS repositories (qemu-2.11.1 for Ubuntu 18.04). The path to the QEMU binary can be adjusted in Constants.py.
FD.io CSIT performance lab is testing VPP vhost-user with KVM VMs using following environment settings:
CSIT supports two types of VMs:
Image-VM: used for all functional, VPP_device, and regular performance tests except NFV density tests.
Kernel-VM: new VM type introduced for NFV density tests to provide greater in-VM application install flexibility and to further reduce test execution time by simpler VM lifecycle management.
CSIT can use a pre-created VM image. The path to the image can be adjusted in Constants.py. For convenience and full compatibility CSIT repository contains a set of scripts to prepare Built-root based embedded Linux image with all the dependencies needed to run DPDK Testpmd, DPDK L3Fwd, Linux bridge or Linux IPv4 forwarding.
Built-root was chosen for a VM image to make it lightweight and with fast booting time to limit impact on tests duration.
In order to execute CSIT tests, VM image must have following software
installed: qemu-guest-agent, sshd, bridge-utils, VirtIO support and DPDK
Testpmd/L3fwd applications. Username/password for the VM must be
NOPASSWD sudo access. The interface naming
is based on the driver (management interface type is Intel E1000), all
E1000 interfaces will be named
mgmt<n> and all VirtIO interfaces
will be named
virtio<n>. In VM
be set to
TRANSPORT=isa-serial:/dev/ttyS1 because ttyS0 is used by
serial console and ttyS1 is dedicated for qemu-guest-agent in QEMU
CSIT can use a kernel KVM image as a boot kernel, as an alternative to image VM. This option allows better configurability of what application is running in VM userspace. Using root9p filesystem allows mapping the host-OS filesystem as read only guest-OS filesystem.
Example of custom init script for the kernel-VM:
mount -t sysfs -o "nodev,noexec,nosuid" sysfs /sys
mount -t proc -o "nodev,noexec,nosuid" proc /proc
mount -t devpts -o "rw,noexec,nosuid,gid=5,mode=0620" devpts /dev/pts || true
mount -t tmpfs -o "rw,noexec,nosuid,size=10%,mode=0755" tmpfs /run
mount -t tmpfs -o "rw,noexec,nosuid,size=10%,mode=0755" tmpfs /tmp
mount -t hugetlbfs -o "rw,relatime,pagesize=2M" hugetlbfs /dev/hugepages
echo 0000:00:06.0 > /sys/bus/pci/devices/0000:00:06.0/driver/unbind
echo 0000:00:07.0 > /sys/bus/pci/devices/0000:00:07.0/driver/unbind
echo vfio-pci > /sys/bus/pci/devices/0000:00:06.0/driver_override
echo vfio-pci > /sys/bus/pci/devices/0000:00:07.0/driver_override
echo 0000:00:06.0 > /sys/bus/pci/drivers/vfio-pci/bind
echo 0000:00:07.0 > /sys/bus/pci/drivers/vfio-pci/bind
QemuUtils library during runtime replaces the
$vnf_bin variable by
the path to NF binary and its parameters. This allows CSIT to run any
application installed on host OS, for example the same version of VPP
as running on the host-OS.
Kernel-VM image must be available in the host filesystem as a prerequisite. The path to kernel-VM image is defined in Constants.py.