3n-tsh-x520

10ge2p1x520-dot1q-ip4base-ndrpdr

RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q-ip4base-ndrpdr 

 1.  4.84       3.25 
2. 4.88 3.28

3. 22 60 75 23 59 72
4. 50 90 108 54 94 111
5. 171 208 230 180 216 240

 64b-2t2c-dot1q-ip4base-ndrpdr 

 1.  6.72       4.52 
2. 6.79 4.56

3. 22 62 88 23 57 92
4. 42 84 98 37 84 99
5. 101 126 155 105 130 162

 64b-4t4c-dot1q-ip4base-ndrpdr 

 1.  7.99       5.37 
2. 7.99 5.37

3. 23 43 61 23 24 42
4. 33 57 62 24 25 34
5. 63 82 96 63 80 90

10ge2p1x520-ethip4-ip4base-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4-ip4base-ndrpdr 

 1.  5.13       3.44 
2. 5.18 3.48

3. 22 80 97 22 74 105
4. 42 84 96 41 91 103
5. 150 195 223 160 204 239

 64b-2t2c-ethip4-ip4base-ndrpdr 

 1.  6.96       4.68 
2. 7.00 4.70

3. 22 71 86 22 74 91
4. 41 84 94 41 84 96
5. 93 119 156 95 120 152

 64b-4t4c-ethip4-ip4base-ndrpdr 

 1.  6.50       4.37 
2. 7.98 5.36

3. 22 42 58 23 25 48
4. 32 57 65 23 26 32
5. 59 77 86 59 78 93

10ge2p1x520-ethip4-ip4scale200k-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4-ip4scale200k-ndrpdr

 1.  3.82       2.56 
2. 3.83 2.58

3. 22 57 83 23 41 81
4. 38 104 118 27 109 126
5. 106 127 148 112 132 157

 64b-2t2c- 
ethip4-ip4scale200k-ndrpdr

 1.  5.83       3.92 
2. 5.97 4.02

3. 22 104 123 23 96 111
4. 54 99 110 50 106 117
5. 113 148 186 118 159 195

 64b-4t4c- 
ethip4-ip4scale200k-ndrpdr

 1.  7.31       4.91 
2. 7.46 5.01

3. 23 41 55 23 39 51
4. 28 64 82 34 74 93
5. 74 95 106 79 100 110

10ge2p1x520-ethip4-ip4scale20k-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4-ip4scale20k-ndrpdr

 1.  4.77       3.21 
2. 4.80 3.22

3. 22 69 81 22 72 95
4. 46 90 102 44 94 102
5. 160 200 227 171 209 241

 64b-2t2c- 
ethip4-ip4scale20k-ndrpdr

 1.  6.14       4.12 
2. 6.26 4.21

3. 22 42 54 23 43 64
4. 41 77 92 39 74 84
5. 91 112 137 92 112 134

 64b-4t4c- 
ethip4-ip4scale20k-ndrpdr

 1.  7.94       5.34 
2. 7.98 5.36

3. 22 39 57 23 24 37
4. 34 61 71 24 27 33
5. 65 84 95 64 84 94

10ge2p1x520-ethip4-ip4scale2m-ndrpdr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4-ip4scale2m-ndrpdr

 1.  3.77       2.54 
2. 3.83 2.57

3. 22 54 96 23 34 95
4. 29 104 115 25 105 120
5. 108 139 167 112 143 188

 64b-2t2c- 
ethip4-ip4scale2m-ndrpdr

 1.  5.81       3.90 
2. 5.87 3.94

3. 23 74 107 23 45 102
4. 56 108 120 57 108 126
5. 120 153 193 121 155 194

 64b-4t4c- 
ethip4-ip4scale2m-ndrpdr

 1.  7.38       4.96 
2. 7.46 5.01

3. 23 44 64 23 41 62
4. 29 64 83 35 75 93
5. 72 96 109 77 100 119

10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-iacl50sf-10kflows-ndrpdr

 1.  2.98       2.00 
2. 3.01 2.02

3. 23 44 91 24 66 111
4. 36 131 150 30 133 140
5. 114 144 186 117 163 175

 64b-2t2c-ethip4udp- 
ip4base-iacl50sf-10kflows-ndrpdr

 1.  4.72       3.17 
2. 4.72 3.17

3. 23 88 115 23 101 111
4. 41 112 122 39 112 120
5. 118 135 147 124 140 152

 64b-4t4c-ethip4udp- 
ip4base-iacl50sf-10kflows-ndrpdr

 1.  8.00       5.38 
2. 8.04 5.40

3. 24 56 73 24 35 69
4. 56 81 88 47 73 88
5. 89 110 123 77 95 103

10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-iacl50sl-10kflows-ndrpdr

 1.  2.96       1.99 
2. 2.99 2.01

3. 23 48 89 23 42 90
4. 34 125 144 29 134 141
5. 110 144 184 113 149 168

 64b-2t2c-ethip4udp- 
ip4base-iacl50sl-10kflows-ndrpdr

 1.  4.35       2.92 
2. 4.83 3.25

3. 23 68 90 23 84 103
4. 48 102 116 34 97 106
5. 109 130 147 112 133 150

 64b-4t4c-ethip4udp- 
ip4base-iacl50sl-10kflows-ndrpdr

 1.  7.80       5.24 
2. 8.03 5.40

3. 24 54 72 24 29 58
4. 56 81 88 35 63 84
5. 89 110 122 77 94 101

10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-nat44-ndrpdr

 1.  2.58       1.73 
2. 3.86 2.59

3. 24 56 102 24 70 115
4. 43 99 133 37 107 121
5. 104 135 181 104 142 156

 64b-2t2c-ethip4udp- 
ip4base-nat44-ndrpdr

 1.  3.95       2.66 
2. 5.90 3.96

3. 24 83 105 24 79 109
4. 48 97 110 49 101 108
5. 95 123 2731 90 118 2727

 64b-4t4c-ethip4udp- 
ip4base-nat44-ndrpdr

 1.  5.30       3.56 
2. 7.18 4.83

3. 24 67 78 24 64 79
4. 56 94 104 51 92 101
5. 104 129 142 85 111 117

10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-oacl50sf-10kflows-ndrpdr

 1.  2.95       1.98 
2. 2.96 1.99

3. 24 49 91 24 76 113
4. 43 145 164 42 156 170
5. 107 163 190 113 157 170

 64b-2t2c-ethip4udp- 
ip4base-oacl50sf-10kflows-ndrpdr

 1.  4.50       3.03 
2. 4.53 3.04

3. 24 36 75 24 31 76
4. 44 118 131 45 117 129
5. 135 153 163 134 144 155

 64b-4t4c-ethip4udp- 
ip4base-oacl50sf-10kflows-ndrpdr

 1.  8.01       5.38 
2. 8.05 5.41

3. 24 57 76 25 26 31
4. 66 85 93 27 32 36
5. 90 110 125 81 98 108

10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4base-oacl50sl-10kflows-ndrpdr

 1.  2.93       1.97 
2. 2.96 1.99

3. 24 48 99 24 77 114
4. 41 141 159 34 146 158
5. 107 162 189 108 155 168

 64b-2t2c-ethip4udp- 
ip4base-oacl50sl-10kflows-ndrpdr

 1.  4.56       3.07 
2. 4.58 3.08

3. 24 65 125 24 86 120
4. 49 120 133 45 126 135
5. 133 149 162 121 149 161

 64b-4t4c-ethip4udp- 
ip4base-oacl50sl-10kflows-ndrpdr

 1.  7.85       5.28 
2. 8.05 5.41

3. 25 62 77 25 27 33
4. 65 83 92 42 71 92
5. 90 112 128 80 98 107

10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-ndrpdr

 1.  2.04       1.37 
2. 3.27 2.20

3. 24 54 99 24 38 52
4. 53 124 162 50 118 155
5. 117 170 3113 118 162 2899

 64b-2t2c-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-ndrpdr

 1.  3.26       2.19 
2. 5.11 3.43

3. 24 43 77 23 29 63
4. 55 111 127 38 105 114
5. 111 143 3105 102 137 2541

 64b-4t4c-ethip4udp- 
ip4scale1000-udpsrcscale15-nat44-ndrpdr

 1.  5.75       3.87 
2. 8.00 5.38

3. 24 34 68 24 45 66
4. 36 71 87 28 36 63
5. 85 105 116 73 91 98