3n-tsh-x520

10ge2p1x520-dot1q–ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with 100 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  2.30       1.55 
2. 2.61 1.75

3. 30 85 129 30 82 131
4. 96 150 191 75 145 174
5. 295 374 407 319 394 444

 64b-2t2c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  3.61       2.43 
2. 3.99 2.68

3. 29 119 157 30 81 155
4. 78 140 176 74 131 156
5. 169 216 250 172 221 252

 64b-4t4c-dot1q- 
-ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr

 1.  7.61       5.12 
2. 7.83 5.26

3. 30 59 100 30 53 100
4. 46 84 104 53 67 78
5. 130 154 167 132 156 170

10ge2p1x520-dot1q–ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-Dot1Q-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with 1 L2 bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, up to 64,5k flows per flow-group) with all packets containing Ethernet header, IEEE 802.1Q header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  2.74       1.84 
2. 3.51 2.36

3. 29 87 119 30 79 124
4. 65 148 167 70 142 166
5. 245 299 332 274 318 360

 64b-2t2c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  4.98       3.34 
2. 5.26 3.53

3. 29 71 96 30 76 98
4. 65 113 129 65 120 136
5. 147 175 206 151 182 213

 64b-4t4c-dot1q- 
-ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr

 1.  7.69       5.17 
2. 7.77 5.22

3. 30 60 83 30 39 86
4. 35 72 84 35 48 81
5. 93 112 131 96 117 136

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  3.65       2.45 
2. 3.67 2.46

3. 29 57 99 30 61 114
4. 70 144 167 71 140 161
5. 236 291 318 266 311 347

 64b-2t2c- 
ethip4vxlan-l2bdbasemaclrn-ndrpdr

 1.  5.36       3.60 
2. 5.41 3.64

3. 29 83 98 29 89 103
4. 83 126 134 83 112 133
5. 138 165 195 140 169 196

10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  4.13       2.77 
2. 4.17 2.80

3. 26 79 117 26 67 122
4. 76 127 134 73 131 139
5. 190 235 273 218 263 296

 64b-2t2c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  6.01       4.04 
2. 6.04 4.06

3. 26 79 108 26 85 106
4. 56 92 106 54 94 104
5. 118 140 167 119 143 171

 64b-4t4c- 
ethip4vxlan-l2xcbase-ndrpdr

 1.  7.83       5.26 
2. 7.83 5.26

3. 26 44 63 26 28 42
4. 30 61 74 28 35 55
5. 72 92 99 73 93 100