3n-tsh-x520

10ge2p1x520-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.29       3.58 
2. 0.29 3.60

3. 64 79 100 63 74 98
4. 146 262 294 144 259 295
5. 464 636 740 453 620 732

 imix-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.23       0.69 
2. 0.23 0.70

 imix-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.45       1.34 
2. 0.45 1.35

10ge2p1x520-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec10000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.27       3.33 
2. 0.27 3.36

3. 46 61 73 46 61 70
4. 146 450 502 154 425 475
5. 586 888 983 584 854 956

 1518b-4t4c-ethip4ipsec10000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.79       9.66 
2. 0.88 10.81

3. 46 82 112 46 76 102
4. 175 441 531 162 425 525
5. 501 679 807 428 577 689

 imix-1t1c-ethip4ipsec10000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.45       1.35 
2. 0.46 1.37

 imix-2t2c-ethip4ipsec10000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.83       2.49 
2. 0.84 2.52

 imix-4t4c-ethip4ipsec10000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  1.52       4.55 
2. 1.54 4.62

10ge2p1x520-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.30       3.72 
2. 0.30 3.73

3. 62 80 127 62 80 129
4. 158 486 625 145 478 602
5. 806 1171 1331 759 1123 1291

 imix-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.24       0.73 
2. 0.25 0.74

 imix-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.48       1.43 
2. 0.48 1.43

10ge2p1x520-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.31       3.79 
2. 0.31 3.82

3. 44 63 72 45 63 81
4. 139 449 491 134 422 459
5. 543 859 942 509 787 861

 1518b-2t2c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.57       7.05 
2. 0.58 7.16

3. 43 69 105 43 68 106
4. 258 625 678 292 660 719
5. 833 1137 1252 783 1102 1195

 1518b-4t4c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.92      11.30 
2. 0.92 11.30

3. 44 77 113 45 72 103
4. 140 382 465 120 358 445
5. 338 468 555 307 426 501

 imix-1t1c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.57       1.70 
2. 0.57 1.70

 imix-2t2c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  1.04       3.11 
2. 1.06 3.16

 imix-4t4c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  1.36       4.06 
2. 1.92 5.75

10ge2p1x520-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.31       3.82 
2. 0.31 3.82

3. 61 77 112 61 65 114
4. 170 365 456 183 387 463
5. 589 823 921 597 816 931

 imix-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.25       0.75 
2. 0.26 0.77

 imix-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-ndrpdr

 1.  0.50       1.48 
2. 0.50 1.50

10ge2p1x520-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.32       3.99 
2. 0.33 4.03

3. 43 65 84 44 63 82
4. 127 443 469 119 408 436
5. 495 796 869 401 733 794

 1518b-2t2c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.61       7.55 
2. 0.62 7.59

3. 43 80 126 43 70 105
4. 181 511 567 220 541 603
5. 716 996 1090 850 1132 1215

 1518b-4t4c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  1.00      12.29 
2. 1.01 12.41

3. 44 74 107 44 75 101
4. 108 334 387 123 333 370
5. 254 359 419 250 347 402

 imix-1t1c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  0.64       1.91 
2. 0.64 1.92

 imix-2t2c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  1.21       3.61 
2. 1.22 3.65

 imix-4t4c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-ndrpdr

 1.  2.20       6.57 
2. 2.20 6.57