3n-skx-x710

10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr 

 2.  4.20       2.82 
  
 3.   21   71  137        21   80  119  
 4.  108  152  167        94  180  194  
 5.  125  197  263       268  327  369  

 1518b-2t1c-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr 

 2.  1.22      14.97 
  
 3.   28   70  121        28   77   99  
 4.  129  328  399       169  372  444  
 5.  230  362  432       323  438  536  

 imix-2t1c-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr 

 2.  2.95       8.82

10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-2lbvpplacp-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  3.34       2.25 
  
 3.   23   53  126        23   54  111  
 4.   42  130  158        58  163  184  
 5.   95  141  159       121  176  194  

 1518b-2t1c-2lbvpplacp-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  1.61      19.85 
  
 3.   29   78   97        30   86  105  
 4.  101  167  196       138  185  219  
 5.  157  202  226       225  259  304  

 9000b-2t1c-2lbvpplacp-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  0.28      19.89 
  
 3.   64   67   89        63   65   79  
 4.  102  159  182       100  182  204  
 5.  151  181  202       188  213  234  

 imix-2t1c-2lbvpplacp-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  2.86       8.55

10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-ndrpdr 

 2.  5.03       3.38 
  
 3.   19   45   70        19   67   95  
 4.   61  114  133        76  133  152  
 5.  120  181  220       226  275  317  

 1518b-2t1c-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-ndrpdr 

 2.  1.48      18.19 
  
 3.   25   67   89        26   74   95  
 4.   91  178  229       125  223  273  
 5.  159  240  279       258  316  387  

 imix-2t1c-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-ndrpdr 

 2.  3.37      10.07

10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-2lbvpplacp-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  4.00       2.69 
  
 3.   21   54  120        22   51  133  
 4.   41   83  135        36   85  115  
 5.   83  122  137       105  146  164  

 1518b-2t1c-2lbvpplacp-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  1.61      19.85 
  
 3.   27   61   86        28   68   82  
 4.   76  127  147        90  143  168  
 5.  115  143  160       149  171  199  

 9000b-2t1c-2lbvpplacp-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  0.28      19.89 
  
 3.   63   69   92        61   64   93  
 4.  100  145  170       103  164  184  
 5.  138  168  189       165  188  207  

 imix-2t1c-2lbvpplacp-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  3.30       9.87

10ge2p1x710-avf-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr 

 2.  4.71       3.17 
  
 3.   21   83  121        21  139  165  
 4.   61  124  144        94  167  188  
 5.  188  253  286       299  335  389  

 1518b-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr 

 2.  1.52      18.73 
  
 3.   32   63   83        33   83  104  
 4.   99  168  209       134  223  252  
 5.  238  308  357       351  430  503  

 imix-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr 

 2.  3.51      10.49

10ge2p1x710-avf-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  3.47       2.33 
  
 3.   24   46  101        24   54  129  
 4.   48  114  140        52  136  160  
 5.  107  155  187       116  169  200  

 1518b-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  1.61      19.85 
  
 3.   29   58   75        30   75   91  
 4.   71  123  145       119  167  186  
 5.  128  153  167       173  199  217  

 9000b-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  0.28      19.89 

 imix-2t1c-avf-2lbvpplacp-dot1q- 
 l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  3.30       9.86

10ge2p1x710-avf-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-ndrpdr 

 2.  5.75       3.86 
  
 3.   24   47   81        24   52   68  
 4.   52   96  118        68  127  143  
 5.  136  193  228       225  265  305  

 1518b-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-ndrpdr 

 2.  1.61      19.85 
  
 3.   28   55   74        28   73   90  
 4.   72  135  164       113  180  203  
 5.  151  198  228       228  268  320  

 imix-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-ndrpdr 

 2.  4.12      12.34

10ge2p1x710-avf-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost and vpp link bonding

  • [Top] Network Topologies: TG-DUT1=DUT2-TG 3-node circular topology with single links between TG and DUT nodes and double link between DUT nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  4.29       2.89 
  
 3.   22   41   89        22   44   87  
 4.   55  100  109        71  119  132  
 5.   65  105  129        76  108  138  

 1518b-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  1.61      19.85 
  
 3.   28   47   62        28   60   73  
 4.   54   97  114        85  131  146  
 5.   92  108  118       124  143  154  

 9000b-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  0.28      19.89 

 imix-2t1c-avf-2lbvpplacp-dot1q- 
 l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 2.  4.07      12.17