3n-skx-xxv710

25ge2p1xxv710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [2.11, 2.14, 2.11, 2.08, 2.10, 2.14, 2.13, 2.09, 2.12, 2.11] 

 imix-4t2c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [1.91, 1.92, 1.93, 1.92, 1.93, 1.96, 1.93, 1.92, 1.91, 1.88] 

 imix-8t4c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [1.72, 1.74, 1.74, 1.74, 1.73, 1.74, 1.73, 1.74, 1.74, 1.73]

25ge2p1xxv710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [4.14, 4.14, 4.10, 4.11, 4.11, 4.10, 4.07, 4.06, 4.04, 4.08] 

 imix-4t2c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [3.90, 3.84, 3.84, 3.85, 3.91, 3.90, 3.88, 3.89, 3.89, 3.91] 

 imix-8t4c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [3.59, 3.56, 3.55, 3.58, 3.59, 3.60, 3.58, 3.61, 3.61, 3.60]

25ge2p1xxv710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [5.58, 5.60, 5.60, 5.60, 5.59, 5.60, 5.60, 5.59, 5.60, 5.59] 

 imix-4t2c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [7.13, 7.13, 7.12, 7.13, 7.13, 7.11, 7.12, 7.13, 7.14, 7.15] 

 imix-8t4c-ethip4ipsec10000tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [7.05, 7.05, 6.99, 6.97, 7.01, 6.95, 6.97, 7.00, 6.94, 6.92]

25ge2p1xxv710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 16mif-8dcr1c-vppip4-aes256gcm-mrr 

 [4.90, 4.91, 4.91, 4.90, 4.90, 4.90, 4.91, 4.91, 4.91, 4.92] 

 imix-4t2c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 16mif-8dcr1c-vppip4-aes256gcm-mrr 

 [8.14, 8.14, 8.14, 8.15, 8.15, 8.16, 8.16, 8.15, 8.15, 8.14] 

 imix-8t4c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 16mif-8dcr1c-vppip4-aes256gcm-mrr 

 [12.36, 12.36, 12.37, 12.37, 12.35, 12.35, 12.35, 12.35, 12.36, 12.34]

25ge2p1xxv710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [2.67, 2.68, 2.64, 2.64, 2.65, 2.65, 2.66, 2.65, 2.66, 2.66] 

 imix-4t2c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [2.44, 2.44, 2.45, 2.45, 2.44, 2.46, 2.44, 2.44, 2.44, 2.43] 

 imix-8t4c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [2.34, 2.35, 2.34, 2.33, 2.35, 2.34, 2.33, 2.32, 2.33, 2.33]

25ge2p1xxv710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [5.60, 5.64, 5.65, 5.67, 5.66, 5.67, 5.65, 5.66, 5.63, 5.62] 

 imix-4t2c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [5.46, 5.48, 5.44, 5.44, 5.51, 5.47, 5.51, 5.54, 5.47, 5.50] 

 imix-8t4c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [4.97, 4.98, 4.97, 4.96, 4.96, 4.96, 4.97, 4.96, 4.97, 4.97]

25ge2p1xxv710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [6.00, 6.01, 6.01, 6.01, 6.01, 6.01, 6.01, 6.01, 6.00, 6.01] 

 imix-4t2c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [11.07, 11.08, 11.07, 11.07, 11.08, 11.07, 11.07, 11.10, 11.07, 11.07] 

 imix-8t4c-ethip4ipsec1000tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [11.26, 11.18, 11.21, 11.33, 11.20, 11.35, 11.29, 11.45, 11.26, 11.34]

25ge2p1xxv710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec4tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [3.30, 3.31, 3.31, 3.31, 3.31, 3.30, 3.30, 3.30, 3.30, 3.28] 

 imix-4t2c-ethip4ipsec4tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [2.97, 3.12, 3.12, 3.03, 2.98, 2.98, 2.98, 2.96, 2.96, 3.09] 

 imix-8t4c-ethip4ipsec4tnlsw-l2bd-1ch- 
 2mif-1dcr1c-vppip4-aes256gcm-mrr 

 [3.13, 3.12, 3.11, 3.08, 3.08, 3.03, 3.02, 3.06, 3.05, 3.03]

25ge2p1xxv710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec4tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [6.75, 6.67, 6.79, 6.88, 6.74, 6.75, 6.78, 6.83, 6.75, 6.76] 

 imix-4t2c-ethip4ipsec4tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [6.50, 6.49, 6.51, 6.48, 6.53, 6.56, 6.52, 6.50, 6.58, 6.51] 

 imix-8t4c-ethip4ipsec4tnlsw-l2bd-1ch- 
 4mif-2dcr1c-vppip4-aes256gcm-mrr 

 [6.38, 6.39, 6.35, 6.35, 6.33, 6.31, 6.32, 6.32, 6.42, 6.29]

25ge2p1xxv710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-mrr

**RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 imix-2t1c-ethip4ipsec4tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [6.09, 6.10, 6.10, 6.10, 6.10, 6.10, 6.10, 6.10, 6.10, 6.10] 

 imix-4t2c-ethip4ipsec4tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [7.63, 7.63, 7.63, 7.64, 7.64, 7.63, 7.64, 7.62, 7.64, 7.62] 

 imix-8t4c-ethip4ipsec4tnlsw-l2bd-1ch- 
 8mif-4dcr1c-vppip4-aes256gcm-mrr 

 [12.27, 12.23, 12.22, 12.23, 12.25, 12.24, 12.25, 12.21, 12.23, 12.23]