.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


func
====

ip4 tunnels
-----------

lisp
````

eth2p-ethip4lisp-ip4base-func
'''''''''''''''''''''''''''''

**IP AFI independent functional tests.**   

 - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.  

 - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.  

 - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.  

 - **[Ver] TG verification:** Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.  

 - **[Ref] Applicable standard specifications:** RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_functional_configuration_centos_eth2p-ethip4lisp-ip4base-func.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_functional_configuration_centos/vpp_functional_configuration_centos_eth2p-ethip4lisp-ip4base-func.csv}


eth2p-ethip4lispgpe-ip4base-func
''''''''''''''''''''''''''''''''

**ip4-lispgpe-ip4 encapsulation test cases**   

 - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.  

 - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.  

 - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.  

 - **[Ver] TG verification:** Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.  

 - **[Ref] Applicable standard specifications:** RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_functional_configuration_centos_eth2p-ethip4lispgpe-ip4base-func.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_functional_configuration_centos/vpp_functional_configuration_centos_eth2p-ethip4lispgpe-ip4base-func.csv}


eth2p-ethip4lispgpe-ip6base-func
''''''''''''''''''''''''''''''''

**LISP static adjacency test cases**   

 - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.  

 - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.  

 - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.  

 - **[Ver] TG verification:** Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.  

 - **[Ref] Applicable standard specifications:** RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_functional_configuration_centos_eth2p-ethip4lispgpe-ip6base-func.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_functional_configuration_centos/vpp_functional_configuration_centos_eth2p-ethip4lispgpe-ip6base-func.csv}


ip6 tunnels
-----------

lisp
````

eth2p-ethip6lispgpe-ip4base-func
''''''''''''''''''''''''''''''''

**LISP static adjacency test cases**   

 - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.  

 - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel.  

 - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.  

 - **[Ver] TG verification:** Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.  

 - **[Ref] Applicable standard specifications:** RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_functional_configuration_centos_eth2p-ethip6lispgpe-ip4base-func.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_functional_configuration_centos/vpp_functional_configuration_centos_eth2p-ethip6lispgpe-ip4base-func.csv}


eth2p-ethip6lispgpe-ip6base-func
''''''''''''''''''''''''''''''''

**ip6-lispgpe-ip6 encapsulation test cases**   

 - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.  

 - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.  

 - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.  

 - **[Ver] TG verification:** Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.  

 - **[Ref] Applicable standard specifications:** RFC6830.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_functional_configuration_centos_eth2p-ethip6lispgpe-ip6base-func.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_functional_configuration_centos/vpp_functional_configuration_centos_eth2p-ethip6lispgpe-ip6base-func.csv}


l2xc
----

eth2p-dot1ad-l2xcbase-func
``````````````````````````

**L2 cross-connect with QinQ test cases**   

 - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.  

 - **[Enc] Packet encapsulations:** Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.  

 - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 cross-connect (L2XC) switching with 802.1ad QinQ VLAN tag push and pop.  

 - **[Ver] TG verification:** Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.  

 - **[Ref] Applicable standard specifications:** IEEE 802.1ad.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_functional_configuration_centos_eth2p-dot1ad-l2xcbase-func.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/test_configuration/vpp_functional_configuration_centos/vpp_functional_configuration_centos_eth2p-dot1ad-l2xcbase-func.csv}