10.1.1. container memif¶
10.1.1.1. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with two L2 bridge domains and MAC learning enabled. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc |
|
tc03-imix-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc |
|
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc |
|
tc05-1518b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc |
|
tc06-1518b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc |
|
tc09-imix-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc |
|
tc10-imix-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc |
|
tc11-1518b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc |
|
tc12-1518b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc |
|
10.1.1.2. 10ge2p1x520-eth-l2xcbase-eth-2memif-1drc-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT. Container is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc |
|
tc03-imix-1t1c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc |
|
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc |
|
tc05-1518b-1t1c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc |
|
tc06-1518b-1t1c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc |
|
tc09-imix-2t2c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc |
|
tc10-imix-2t2c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc |
|
tc11-1518b-2t2c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc |
|
tc12-1518b-2t2c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc |
|
10.1.1.3. 10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc |
|
tc03-imix-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc |
|
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc |
|
tc05-1518b-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc |
|
tc06-1518b-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc |
|
tc09-imix-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc |
|
tc10-imix-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc |
|
tc11-1518b-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc |
|
tc12-1518b-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc |
|
10.1.2. crypto¶
10.1.2.1. 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc |
|
10.1.2.2. 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-pdrdisc |
|
10.1.2.3. 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-pdrdisc |
|
10.1.2.4. 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-pdrdisc |
|
10.1.2.5. 40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with DPDK SW crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc |
|
10.1.2.6. 40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with DPDK SW crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc |
|
10.1.2.7. 40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with DPDK SW crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc |
|
10.1.2.8. 40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with DPDK SW crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc |
|
10.1.2.9. 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
10.1.2.10. 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
10.1.2.11. 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
10.1.2.12. 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec tunnel mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC4303 and RFC2544.
10.1.2.13. 40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc¶
IPv4 IPsec transport mode performance test suite.
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2
- [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec in each direction. IPsec is in transport mode. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in number of packets transmitted. NDR is discovered for different number of IPsec tunnels using binary search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC6830, RFC4303 and RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc |
|
tc02-64b-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc |
|
tc03-1518b-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc |
|
tc04-1518b-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc |
|
tc05-imix-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc |
|
tc06-imix-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc |
|
tc07-64b-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc |
|
tc08-64b-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc |
|
tc13-64b-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc |
|
tc14-64b-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc |
|
10.1.3. ip4¶
10.1.3.1. 10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 whitelist test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing, two static IPv4 /24 routes and IPv4 COP security whitelist ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4base-copwhtlistbase-pdrdisc |
|
10.1.3.2. 10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 iAcl whitelist test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-iacldstbase-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4base-iacldstbase-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4base-iacldstbase-pdrdisc |
|
10.1.3.3. 10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 policer test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries and policer with 2R3C color-aware configuration. Policer is applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544, RFC2698.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc |
|
10.1.3.4. 10ge2p1x520-ethip4-ip4base-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4base-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4base-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4base-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4base-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4base-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4base-pdrdisc |
|
tc19-imix-1t1c-ethip4-ip4base-ndrdisc |
|
tc20-imix-1t1c-ethip4-ip4base-pdrdisc |
|
10.1.3.5. 10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4scale200k-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4scale200k-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4scale200k-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4scale200k-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4scale200k-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4scale200k-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4scale200k-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4scale200k-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4scale200k-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4scale200k-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4scale200k-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4scale200k-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4scale200k-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4scale200k-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4scale200k-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4scale200k-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4scale200k-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4scale200k-pdrdisc |
|
10.1.3.6. 10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4scale20k-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4scale20k-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4scale20k-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4scale20k-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4scale20k-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4scale20k-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4scale20k-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4scale20k-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4scale20k-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4scale20k-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4scale20k-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4scale20k-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4scale20k-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4scale20k-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4scale20k-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4scale20k-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4scale20k-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4scale20k-pdrdisc |
|
10.1.3.7. 10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4scale2m-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4scale2m-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4scale2m-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4scale2m-pdrdisc |
|
tc05-9000b-1t1c-ethip4-ip4scale2m-ndrdisc |
|
tc06-9000b-1t1c-ethip4-ip4scale2m-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4scale2m-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4scale2m-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4scale2m-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4scale2m-pdrdisc |
|
tc11-9000b-2t2c-ethip4-ip4scale2m-ndrdisc |
|
tc12-9000b-2t2c-ethip4-ip4scale2m-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4scale2m-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4scale2m-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4scale2m-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4scale2m-pdrdisc |
|
tc17-9000b-4t4c-ethip4-ip4scale2m-ndrdisc |
|
tc18-9000b-4t4c-ethip4-ip4scale2m-pdrdisc |
|
10.1.3.8. 10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100-pdrdisc |
|
10.1.3.9. 10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100k-pdrdisc |
|
10.1.3.10. 10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl10-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl10-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl10-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl10-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl10-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl10-stateful-flows10k-pdrdisc |
|
10.1.3.11. 10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100-pdrdisc |
|
10.1.3.12. 10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100k-pdrdisc |
|
10.1.3.13. 10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl10-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl10-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl10-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl10-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl10-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl10-stateless-flows10k-pdrdisc |
|
10.1.3.14. 10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100-pdrdisc |
|
10.1.3.15. 10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100k-pdrdisc |
|
10.1.3.16. 10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-pdrdisc |
|
10.1.3.17. 10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100-pdrdisc |
|
10.1.3.18. 10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100k-pdrdisc |
|
10.1.3.19. 10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-pdrdisc |
|
10.1.3.20. 10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-ip4base-iacl50-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-ip4base-iacl50-stateful-flows100-pdrdisc |
|
10.1.3.21. 10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows100k-pdrdisc |
|
10.1.3.22. 10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-pdrdisc |
|
10.1.3.23. 10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100-pdrdisc |
|
10.1.3.24. 10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100k-pdrdisc |
|
10.1.3.25. 10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-pdrdisc |
|
10.1.3.26. 10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc05-imix-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc06-imix-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc11-imix-2t2c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc12-imix-2t2c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
tc17-imix-4t4c-ethip4-ip4base-snat-1u-1p-ndrdisc |
|
tc18-imix-4t4c-ethip4-ip4base-snat-1u-1p-pdrdisc |
|
10.1.3.27. 10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100-pdrdisc |
|
10.1.3.28. 10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100k-pdrdisc |
|
10.1.3.29. 10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl10-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl10-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl10-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl10-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl10-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl10-stateful-flows10k-pdrdisc |
|
10.1.3.30. 10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100-pdrdisc |
|
10.1.3.31. 10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100k-pdrdisc |
|
10.1.3.32. 10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl10-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl10-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl10-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl10-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl10-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl10-stateless-flows10k-pdrdisc |
|
10.1.3.33. 10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100-pdrdisc |
|
10.1.3.34. 10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc |
|
10.1.3.35. 10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl1-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl1-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl1-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl1-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl1-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl1-stateful-flows10k-pdrdisc |
|
10.1.3.36. 10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100-pdrdisc |
|
10.1.3.37. 10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100k-pdrdisc |
|
10.1.3.38. 10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl1-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl1-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl1-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl1-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl1-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl1-stateless-flows10k-pdrdisc |
|
10.1.3.39. 10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100-pdrdisc |
|
10.1.3.40. 10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100k-pdrdisc |
|
10.1.3.41. 10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl50-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl50-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl50-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl50-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl50-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl50-stateful-flows10k-pdrdisc |
|
10.1.3.42. 10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100-pdrdisc |
|
10.1.3.43. 10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100k-pdrdisc |
|
10.1.3.44. 10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput IPv4 test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-oacl50-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-oacl50-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-ethip4udp-ip4base-oacl50-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-ethip4udp-ip4base-oacl50-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-ethip4udp-ip4base-oacl50-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-ethip4udp-ip4base-oacl50-stateless-flows10k-pdrdisc |
|
10.1.3.45. 10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc03-1518b-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc04-1518b-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc05-imix-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc06-imix-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc07-64b-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc08-64b-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc09-1518b-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc10-1518b-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc11-imix-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc12-imix-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc13-64b-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc14-64b-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc15-1518b-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc16-1518b-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
tc17-imix-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc |
|
tc18-imix-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc |
|
10.1.3.46. 10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc03-1518b-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc04-1518b-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc05-imix-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc06-imix-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc07-64b-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc08-64b-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc09-1518b-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc10-1518b-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc11-imix-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc12-imix-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc13-64b-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc14-64b-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc15-1518b-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc16-1518b-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
tc17-imix-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc |
|
tc18-imix-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc |
|
10.1.3.47. 10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc03-1518b-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc04-1518b-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc05-imix-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc06-imix-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc07-64b-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc08-64b-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc09-1518b-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc10-1518b-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc11-imix-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc12-imix-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc13-64b-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc14-64b-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc15-1518b-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc16-1518b-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
tc17-imix-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc |
|
tc18-imix-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc |
|
10.1.3.48. 10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc03-1518b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc04-1518b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc05-imix-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc06-imix-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc07-64b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc08-64b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc09-1518b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc10-1518b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc11-imix-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc12-imix-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc13-64b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc14-64b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc15-1518b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc16-1518b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
tc17-imix-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc |
|
tc18-imix-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc |
|
10.1.3.49. 10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc03-1518b-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc04-1518b-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc05-imix-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc06-imix-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc07-64b-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc08-64b-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc09-1518b-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc10-1518b-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc11-imix-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc12-imix-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc13-64b-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc14-64b-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc15-1518b-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc16-1518b-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
tc17-imix-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc |
|
tc18-imix-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc |
|
10.1.3.50. 10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc¶
NAT44 performance test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, one flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc02-64b-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc03-1518b-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc04-1518b-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc05-imix-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc06-imix-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc07-64b-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc08-64b-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc09-1518b-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc10-1518b-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc11-imix-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc12-imix-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc13-64b-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc14-64b-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc15-1518b-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc16-1518b-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
tc17-imix-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc |
|
tc18-imix-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc |
|
10.1.3.51. 40ge2p1xl710-ethip4-ip4base-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-ndrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-ndrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-ndrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-ndrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-ndrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-ndrdisc |
|
tc19-imix-1t1c-ethip4-ip4base-ndrdisc |
|
tc20-imix-2t2c-ethip4-ip4base-ndrdisc |
|
tc21-imix-4t4c-ethip4-ip4base-ndrdisc |
|
10.1.4. ip4 tunnels¶
10.1.4.1. 10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc¶
RFC6830: Pkt throughput Lisp test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search
- [Ref] Applicable standard specifications: RFC6830.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4lispip4-ip4base-ndrdisc |
|
tc02-64b-1t1c-ethip4lispip4-ip4base-pdrdisc |
|
tc03-1480b-1t1c-ethip4lispip4-ip4base-ndrdisc |
|
tc04-1480b-1t1c-ethip4lispip4-ip4base-pdrdisc |
|
tc05-9000b-1t1c-ethip4lispip4-ip4base-ndrdisc |
|
tc06-9000b-1t1c-ethip4lispip4-ip4base-pdrdisc |
|
tc07-64b-2t2c-ethip4lispip4-ip4base-ndrdisc |
|
tc08-64b-2t2c-ethip4lispip4-ip4base-pdrdisc |
|
tc09-1480b-2t2c-ethip4lispip4-ip4base-ndrdisc |
|
tc10-1480b-2t2c-ethip4lispip4-ip4base-pdrdisc |
|
tc11-9000b-2t2c-ethip4lispip4-ip4base-ndrdisc |
|
tc12-9000b-2t2c-ethip4lispip4-ip4base-pdrdisc |
|
tc13-64b-4t4c-ethip4lispip4-ip4base-ndrdisc |
|
tc14-64b-4t4c-ethip4lispip4-ip4base-pdrdisc |
|
tc15-1480b-4t4c-ethip4lispip4-ip4base-ndrdisc |
|
tc16-1480b-4t4c-ethip4lispip4-ip4base-pdrdisc |
|
tc17-9000b-4t4c-ethip4lispip4-ip4base-ndrdisc |
|
tc18-9000b-4t4c-ethip4lispip4-ip4base-pdrdisc |
|
10.1.4.2. 10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc¶
RFC6830: Pkt throughput Lisp test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv6 on DUT1-DUT2 and Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search
- [Ref] Applicable standard specifications: RFC6830.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4lispip6-ip4base-ndrdisc |
|
tc02-64b-1t1c-ethip4lispip6-ip4base-pdrdisc |
|
tc03-1460b-1t1c-ethip4lispip6-ip4base-ndrdisc |
|
tc04-1460b-1t1c-ethip4lispip6-ip4base-pdrdisc |
|
tc05-9000b-1t1c-ethip4lispip6-ip4base-ndrdisc |
|
tc06-9000b-1t1c-ethip4lispip6-ip4base-pdrdisc |
|
tc07-64b-2t2c-ethip4lispip6-ip4base-ndrdisc |
|
tc08-64b-2t2c-ethip4lispip6-ip4base-pdrdisc |
|
tc09-1460b-2t2c-ethip4lispip6-ip4base-ndrdisc |
|
tc10-1460b-2t2c-ethip4lispip6-ip4base-pdrdisc |
|
tc11-9000b-2t2c-ethip4lispip6-ip4base-ndrdisc |
|
tc12-9000b-2t2c-ethip4lispip6-ip4base-pdrdisc |
|
tc13-64b-4t4c-ethip4lispip6-ip4base-ndrdisc |
|
tc14-64b-4t4c-ethip4lispip6-ip4base-pdrdisc |
|
tc15-1460b-4t4c-ethip4lispip6-ip4base-ndrdisc |
|
tc16-1460b-4t4c-ethip4lispip6-ip4base-pdrdisc |
|
tc17-9000b-4t4c-ethip4lispip6-ip4base-ndrdisc |
|
tc18-9000b-4t4c-ethip4lispip6-ip4base-pdrdisc |
|
10.1.4.3. 10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Packet throughput L2BD with VXLANoIPv4 test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc02-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc03-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc04-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc05-9000b-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc06-9000b-1t1c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc07-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc08-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc09-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc10-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc11-9000b-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc12-9000b-2t2c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc13-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc14-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc15-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc16-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
tc17-9000b-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc |
|
tc18-9000b-4t4c-ethip4vxlan-l2bdbasemaclrn-pdrdisc |
|
10.1.4.4. 10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc02-64b-1t1c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc03-1518b-1t1c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc04-1518b-1t1c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc05-9000b-1t1c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc06-9000b-1t1c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc07-64b-2t2c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc08-64b-2t2c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc09-1518b-2t2c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc10-1518b-2t2c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc11-9000b-2t2c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc12-9000b-2t2c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc13-64b-4t4c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc14-64b-4t4c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc15-1518b-4t4c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc16-1518b-4t4c-ethip4vxlan-l2xcbase-pdrdisc |
|
tc17-9000b-4t4c-ethip4vxlan-l2xcbase-ndrdisc |
|
tc18-9000b-4t4c-ethip4vxlan-l2xcbase-pdrdisc |
|
10.1.5. ip6¶
10.1.5.1. 10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 whitelist test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 COP security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc02-78b-1t1c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc03-1518b-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc04-1518b-1t1c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc05-9000b-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc06-9000b-1t1c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc07-78b-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc08-78b-2t2c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc09-1518b-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc10-1518b-2t2c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc11-9000b-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc12-9000b-2t2c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc13-78b-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc14-78b-4t4c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc15-1518b-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc16-1518b-4t4c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
tc17-9000b-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc |
|
tc18-9000b-4t4c-ethip6-ip6base-copwhtlistbase-pdrdisc |
|
10.1.5.2. 10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 iAcl whitelist test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc02-78b-1t1c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc03-1518b-1t1c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc04-1518b-1t1c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc05-9000b-1t1c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc06-9000b-1t1c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc07-78b-2t2c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc08-78b-2t2c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc09-1518b-2t2c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc10-1518b-2t2c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc11-9000b-2t2c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc12-9000b-2t2c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc13-78b-4t4c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc14-78b-4t4c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc15-1518b-4t4c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc16-1518b-4t4c-ethip6-ip6base-iacldstbase-pdrdisc |
|
tc17-9000b-4t4c-ethip6-ip6base-iacldstbase-ndrdisc |
|
tc18-9000b-4t4c-ethip6-ip6base-iacldstbase-pdrdisc |
|
10.1.5.3. 10ge2p1x520-ethip6-ip6base-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6base-ndrdisc |
|
tc02-78b-1t1c-ethip6-ip6base-pdrdisc |
|
tc03-1518b-1t1c-ethip6-ip6base-ndrdisc |
|
tc04-1518b-1t1c-ethip6-ip6base-pdrdisc |
|
tc05-9000b-1t1c-ethip6-ip6base-ndrdisc |
|
tc06-9000b-1t1c-ethip6-ip6base-pdrdisc |
|
tc07-78b-2t2c-ethip6-ip6base-ndrdisc |
|
tc08-78b-2t2c-ethip6-ip6base-pdrdisc |
|
tc09-1518b-2t2c-ethip6-ip6base-ndrdisc |
|
tc10-1518b-2t2c-ethip6-ip6base-pdrdisc |
|
tc11-9000b-2t2c-ethip6-ip6base-ndrdisc |
|
tc12-9000b-2t2c-ethip6-ip6base-pdrdisc |
|
tc13-78b-4t4c-ethip6-ip6base-ndrdisc |
|
tc14-78b-4t4c-ethip6-ip6base-pdrdisc |
|
tc15-1518b-4t4c-ethip6-ip6base-ndrdisc |
|
tc16-1518b-4t4c-ethip6-ip6base-pdrdisc |
|
tc17-9000b-4t4c-ethip6-ip6base-ndrdisc |
|
tc18-9000b-4t4c-ethip6-ip6base-pdrdisc |
|
10.1.5.4. 10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6scale200k-ndrdisc |
|
tc02-78b-1t1c-ethip6-ip6scale200k-pdrdisc |
|
tc03-1518b-1t1c-ethip6-ip6scale200k-ndrdisc |
|
tc04-1518b-1t1c-ethip6-ip6scale200k-pdrdisc |
|
tc05-9000b-1t1c-ethip6-ip6scale200k-ndrdisc |
|
tc06-9000b-1t1c-ethip6-ip6scale200k-pdrdisc |
|
tc07-78b-2t2c-ethip6-ip6scale200k-ndrdisc |
|
tc08-78b-2t2c-ethip6-ip6scale200k-pdrdisc |
|
tc09-1518b-2t2c-ethip6-ip6scale200k-ndrdisc |
|
tc10-1518b-2t2c-ethip6-ip6scale200k-pdrdisc |
|
tc11-9000b-2t2c-ethip6-ip6scale200k-ndrdisc |
|
tc12-9000b-2t2c-ethip6-ip6scale200k-pdrdisc |
|
tc13-78b-4t4c-ethip6-ip6scale200k-ndrdisc |
|
tc14-78b-4t4c-ethip6-ip6scale200k-pdrdisc |
|
tc15-1518b-4t4c-ethip6-ip6scale200k-ndrdisc |
|
tc16-1518b-4t4c-ethip6-ip6scale200k-pdrdisc |
|
tc17-9000b-4t4c-ethip6-ip6scale200k-ndrdisc |
|
tc18-9000b-4t4c-ethip6-ip6scale200k-pdrdisc |
|
10.1.5.5. 10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6scale20k-ndrdisc |
|
tc02-78b-1t1c-ethip6-ip6scale20k-pdrdisc |
|
tc03-1518b-1t1c-ethip6-ip6scale20k-ndrdisc |
|
tc04-1518b-1t1c-ethip6-ip6scale20k-pdrdisc |
|
tc05-9000b-1t1c-ethip6-ip6scale20k-ndrdisc |
|
tc06-9000b-1t1c-ethip6-ip6scale20k-pdrdisc |
|
tc07-78b-2t2c-ethip6-ip6scale20k-ndrdisc |
|
tc08-78b-2t2c-ethip6-ip6scale20k-pdrdisc |
|
tc09-1518b-2t2c-ethip6-ip6scale20k-ndrdisc |
|
tc10-1518b-2t2c-ethip6-ip6scale20k-pdrdisc |
|
tc11-9000b-2t2c-ethip6-ip6scale20k-ndrdisc |
|
tc12-9000b-2t2c-ethip6-ip6scale20k-pdrdisc |
|
tc13-78b-4t4c-ethip6-ip6scale20k-ndrdisc |
|
tc14-78b-4t4c-ethip6-ip6scale20k-pdrdisc |
|
tc15-1518b-4t4c-ethip6-ip6scale20k-ndrdisc |
|
tc16-1518b-4t4c-ethip6-ip6scale20k-pdrdisc |
|
tc17-9000b-4t4c-ethip6-ip6scale20k-ndrdisc |
|
tc18-9000b-4t4c-ethip6-ip6scale20k-pdrdisc |
|
10.1.5.6. 10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6scale2m-ndrdisc |
|
tc02-78b-1t1c-ethip6-ip6scale2m-pdrdisc |
|
tc03-1518b-1t1c-ethip6-ip6scale2m-ndrdisc |
|
tc04-1518b-1t1c-ethip6-ip6scale2m-pdrdisc |
|
tc05-9000b-1t1c-ethip6-ip6scale2m-ndrdisc |
|
tc06-9000b-1t1c-ethip6-ip6scale2m-pdrdisc |
|
tc07-78b-2t2c-ethip6-ip6scale2m-ndrdisc |
|
tc08-78b-2t2c-ethip6-ip6scale2m-pdrdisc |
|
tc09-1518b-2t2c-ethip6-ip6scale2m-ndrdisc |
|
tc10-1518b-2t2c-ethip6-ip6scale2m-pdrdisc |
|
tc11-9000b-2t2c-ethip6-ip6scale2m-ndrdisc |
|
tc12-9000b-2t2c-ethip6-ip6scale2m-pdrdisc |
|
tc13-78b-4t4c-ethip6-ip6scale2m-ndrdisc |
|
tc14-78b-4t4c-ethip6-ip6scale2m-pdrdisc |
|
tc15-1518b-4t4c-ethip6-ip6scale2m-ndrdisc |
|
tc16-1518b-4t4c-ethip6-ip6scale2m-pdrdisc |
|
tc17-9000b-4t4c-ethip6-ip6scale2m-ndrdisc |
|
tc18-9000b-4t4c-ethip6-ip6scale2m-pdrdisc |
|
10.1.5.7. 40ge2p1xl710-ethip6-ip6base-ndrpdrdisc¶
RFC2544: Pkt throughput IPv6 routing test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6-ip6base-ndrdisc |
|
tc03-1518b-1t1c-ethip6-ip6base-ndrdisc |
|
tc07-78b-2t2c-ethip6-ip6base-ndrdisc |
|
tc09-1518b-2t2c-ethip6-ip6base-ndrdisc |
|
tc13-78b-4t4c-ethip6-ip6base-ndrdisc |
|
tc15-1518b-4t4c-ethip6-ip6base-ndrdisc |
|
10.1.6. ip6 tunnels¶
10.1.6.1. 10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc¶
RFC6830: Pkt throughput Lisp test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search
- [Ref] Applicable standard specifications: RFC6830.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6lispip4-ip6base-ndrdisc |
|
tc02-78b-1t1c-ethip6lispip4-ip6base-pdrdisc |
|
tc03-1460b-1t1c-ethip6lispip4-ip6base-ndrdisc |
|
tc04-1460b-1t1c-ethip6lispip4-ip6base-pdrdisc |
|
tc05-9000b-1t1c-ethip6lispip4-ip6base-ndrdisc |
|
tc06-9000b-1t1c-ethip6lispip4-ip6base-pdrdisc |
|
tc07-78b-2t2c-ethip6lispip4-ip6base-ndrdisc |
|
tc08-78b-2t2c-ethip6lispip4-ip6base-pdrdisc |
|
tc09-1460b-2t2c-ethip6lispip4-ip6base-ndrdisc |
|
tc10-1460b-2t2c-ethip6lispip4-ip6base-pdrdisc |
|
tc11-9000b-2t2c-ethip6lispip4-ip6base-ndrdisc |
|
tc12-9000b-2t2c-ethip6lispip4-ip6base-pdrdisc |
|
tc13-78b-4t4c-ethip6lispip4-ip6base-ndrdisc |
|
tc14-78b-4t4c-ethip6lispip4-ip6base-pdrdisc |
|
tc15-1460b-4t4c-ethip6lispip4-ip6base-ndrdisc |
|
tc16-1460b-4t4c-ethip6lispip4-ip6base-pdrdisc |
|
tc17-9000b-4t4c-ethip6lispip4-ip6base-ndrdisc |
|
tc18-9000b-4t4c-ethip6lispip4-ip6base-pdrdisc |
|
10.1.6.2. 10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc¶
RFC6830: Pkt throughput Lisp test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search
- [Ref] Applicable standard specifications: RFC6830.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6lispip6-ip6base-ndrdisc |
|
tc02-78b-1t1c-ethip6lispip6-ip6base-pdrdisc |
|
tc03-1460b-1t1c-ethip6lispip6-ip6base-ndrdisc |
|
tc04-1460b-1t1c-ethip6lispip6-ip6base-pdrdisc |
|
tc05-9000b-1t1c-ethip6lispip6-ip6base-ndrdisc |
|
tc06-9000b-1t1c-ethip6lispip6-ip6base-pdrdisc |
|
tc07-78b-2t2c-ethip6lispip6-ip6base-ndrdisc |
|
tc08-78b-2t2c-ethip6lispip6-ip6base-pdrdisc |
|
tc09-1460b-2t2c-ethip6lispip6-ip6base-ndrdisc |
|
tc10-1460b-2t2c-ethip6lispip6-ip6base-pdrdisc |
|
tc11-9000b-2t2c-ethip6lispip6-ip6base-ndrdisc |
|
tc12-9000b-2t2c-ethip6lispip6-ip6base-pdrdisc |
|
tc13-78b-4t4c-ethip6lispip6-ip6base-ndrdisc |
|
tc14-78b-4t4c-ethip6lispip6-ip6base-pdrdisc |
|
tc15-1460b-4t4c-ethip6lispip6-ip6base-ndrdisc |
|
tc16-1460b-4t4c-ethip6lispip6-ip6base-pdrdisc |
|
tc17-9000b-4t4c-ethip6lispip6-ip6base-ndrdisc |
|
tc18-9000b-4t4c-ethip6lispip6-ip6base-pdrdisc |
|
10.1.7. l2¶
10.1.7.1. 10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC Cisco-VIC-1227.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc05-9000b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc06-9000b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc11-9000b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc12-9000b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
tc17-9000b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc18-9000b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
10.1.7.2. 10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC with 802.1ad test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 xconnect. 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B vlan tag (id=100) and outer 4B vlan tag (id=200).
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-dot1ad-l2xcbase-ndrdisc |
|
tc02-64b-1t1c-dot1ad-l2xcbase-pdrdisc |
|
tc03-1514b-1t1c-dot1ad-l2xcbase-ndrdisc |
|
tc04-1514b-1t1c-dot1ad-l2xcbase-pdrdisc |
|
tc05-9000b-1t1c-dot1ad-l2xcbase-ndrdisc |
|
tc06-9000b-1t1c-dot1ad-l2xcbase-pdrdisc |
|
tc07-64b-2t2c-dot1ad-l2xcbase-ndrdisc |
|
tc08-64b-2t2c-dot1ad-l2xcbase-pdrdisc |
|
tc09-1514b-2t2c-dot1ad-l2xcbase-ndrdisc |
|
tc10-1514b-2t2c-dot1ad-l2xcbase-pdrdisc |
|
tc11-9000b-2t2c-dot1ad-l2xcbase-ndrdisc |
|
tc12-9000b-2t2c-dot1ad-l2xcbase-pdrdisc |
|
tc13-64b-4t4c-dot1ad-l2xcbase-ndrdisc |
|
tc14-64b-4t4c-dot1ad-l2xcbase-pdrdisc |
|
tc15-1514b-4t4c-dot1ad-l2xcbase-ndrdisc |
|
tc16-1514b-4t4c-dot1ad-l2xcbase-pdrdisc |
|
tc17-9000b-4t4c-dot1ad-l2xcbase-ndrdisc |
|
tc18-9000b-4t4c-dot1ad-l2xcbase-pdrdisc |
|
10.1.7.3. 10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with 802.1q test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc02-64b-1t1c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc03-1518b-1t1c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc04-1518b-1t1c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc05-imix-1t1c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc06-imix-1t1c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc07-64b-2t2c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc08-64b-2t2c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc09-1518b-2t2c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc10-1518b-2t2c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc11-imix-2t2c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc12-imix-2t2c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc13-64b-4t4c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc14-64b-4t4c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc15-1518b-4t4c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc16-1518b-4t4c-dot1q-l2bdbasemaclrn-pdrdisc |
|
tc17-imix-4t4c-dot1q-l2bdbasemaclrn-ndrdisc |
|
tc18-imix-4t4c-dot1q-l2bdbasemaclrn-pdrdisc |
|
10.1.7.4. 10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC with 802.1q test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-dot1q-l2xcbase-ndrdisc |
|
tc02-64b-1t1c-dot1q-l2xcbase-pdrdisc |
|
tc03-1518b-1t1c-dot1q-l2xcbase-ndrdisc |
|
tc04-1518b-1t1c-dot1q-l2xcbase-pdrdisc |
|
tc05-9000b-1t1c-dot1q-l2xcbase-ndrdisc |
|
tc06-9000b-1t1c-dot1q-l2xcbase-pdrdisc |
|
tc07-64b-2t2c-dot1q-l2xcbase-ndrdisc |
|
tc08-64b-2t2c-dot1q-l2xcbase-pdrdisc |
|
tc09-1518b-2t2c-dot1q-l2xcbase-ndrdisc |
|
tc10-1518b-2t2c-dot1q-l2xcbase-pdrdisc |
|
tc11-9000b-2t2c-dot1q-l2xcbase-ndrdisc |
|
tc12-9000b-2t2c-dot1q-l2xcbase-pdrdisc |
|
tc13-64b-4t4c-dot1q-l2xcbase-ndrdisc |
|
tc14-64b-4t4c-dot1q-l2xcbase-pdrdisc |
|
tc15-1518b-4t4c-dot1q-l2xcbase-ndrdisc |
|
tc16-1518b-4t4c-dot1q-l2xcbase-pdrdisc |
|
tc17-9000b-4t4c-dot1q-l2xcbase-ndrdisc |
|
tc18-9000b-4t4c-dot1q-l2xcbase-pdrdisc |
|
10.1.7.5. 10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-pdrdisc |
|
10.1.7.6. 10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-pdrdisc |
|
10.1.7.7. 10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-pdrdisc |
|
10.1.7.8. 10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-pdrdisc |
|
10.1.7.9. 10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-pdrdisc |
|
10.1.7.10. 10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-pdrdisc |
|
10.1.7.11. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-pdrdisc |
|
10.1.7.12. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-pdrdisc |
|
10.1.7.13. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-pdrdisc |
|
10.1.7.14. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-pdrdisc |
|
10.1.7.15. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-pdrdisc |
|
10.1.7.16. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-pdrdisc |
|
10.1.7.17. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-pdrdisc |
|
10.1.7.18. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-pdrdisc |
|
10.1.7.19. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-pdrdisc |
|
10.1.7.20. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-pdrdisc |
|
10.1.7.21. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-pdrdisc |
|
10.1.7.22. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-pdrdisc |
|
10.1.7.23. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-pdrdisc |
|
10.1.7.24. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-pdrdisc |
|
10.1.7.25. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-pdrdisc |
|
10.1.7.26. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-pdrdisc |
|
10.1.7.27. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-pdrdisc |
|
10.1.7.28. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-pdrdisc |
|
10.1.7.29. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-pdrdisc |
|
10.1.7.30. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-pdrdisc |
|
10.1.7.31. 10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-pdrdisc |
|
10.1.7.32. 10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc05-9000b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc06-9000b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc11-9000b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc12-9000b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
tc17-9000b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc18-9000b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
10.1.7.33. 10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-pdrdisc |
|
10.1.7.34. 10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-pdrdisc |
|
10.1.7.35. 10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-pdrdisc |
|
10.1.7.36. 10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-pdrdisc |
|
10.1.7.37. 10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-pdrdisc |
|
10.1.7.38. 10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-pdrdisc |
|
10.1.7.39. 10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-pdrdisc |
|
10.1.7.40. 10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-pdrdisc |
|
10.1.7.41. 10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-pdrdisc |
|
10.1.7.42. 10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-pdrdisc |
|
10.1.7.43. 10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-pdrdisc |
|
10.1.7.44. 10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-pdrdisc |
|
10.1.7.45. 10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-pdrdisc |
|
10.1.7.46. 10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-pdrdisc |
|
10.1.7.47. 10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-pdrdisc |
|
10.1.7.48. 10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100 flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-pdrdisc |
|
10.1.7.49. 10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-pdrdisc |
|
10.1.7.50. 10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with ACL
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-pdrdisc |
|
tc03-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-ndrdisc |
|
tc04-64b-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-pdrdisc |
|
tc05-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-ndrdisc |
|
tc06-64b-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-pdrdisc |
|
10.1.7.51. 10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 50k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:c3:4f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:c3:4f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:c3:4f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:c3:4f,
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc05-9000b-1t1c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc06-9000b-1t1c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc11-9000b-2t2c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc12-9000b-2t2c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdscale100kmaclrn-pdrdisc |
|
tc17-9000b-4t4c-eth-l2bdscale100kmaclrn-ndrdisc |
|
tc18-9000b-4t4c-eth-l2bdscale100kmaclrn-pdrdisc |
|
10.1.7.52. 10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:13:87, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:13:87, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:13:87, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:13:87,
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc04-1518b-1t1c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc05-9000b-1t1c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc06-9000b-1t1c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc07-64b-2t2c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc08-64b-2t2c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc09-1518b-2t2c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc10-1518b-2t2c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc11-9000b-2t2c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc12-9000b-2t2c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc13-64b-4t4c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc14-64b-4t4c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc15-1518b-4t4c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc16-1518b-4t4c-eth-l2dbscale10kmaclrn-pdrdisc |
|
tc17-9000b-4t4c-eth-l2dbscale10kmaclrn-ndrdisc |
|
tc18-9000b-4t4c-eth-l2dbscale10kmaclrn-pdrdisc |
|
10.1.7.53. 10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f,
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc05-9000b-1t1c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc06-9000b-1t1c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc11-9000b-2t2c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc12-9000b-2t2c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdscale1mmaclrn-pdrdisc |
|
tc17-9000b-4t4c-eth-l2bdscale1mmaclrn-ndrdisc |
|
tc18-9000b-4t4c-eth-l2bdscale1mmaclrn-pdrdisc |
|
10.1.7.54. 10ge2p1x520-eth-l2xcbase-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-pdrdisc |
|
tc03-1518b-1t1c-eth-l2xcbase-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-pdrdisc |
|
tc05-9000b-1t1c-eth-l2xcbase-ndrdisc |
|
tc06-9000b-1t1c-eth-l2xcbase-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-pdrdisc |
|
tc11-9000b-2t2c-eth-l2xcbase-ndrdisc |
|
tc12-9000b-2t2c-eth-l2xcbase-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-pdrdisc |
|
tc17-9000b-4t4c-eth-l2xcbase-ndrdisc |
|
tc18-9000b-4t4c-eth-l2xcbase-pdrdisc |
|
10.1.7.55. 10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc05-9000b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc06-9000b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc11-9000b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc12-9000b-2t2c-eth-l2bdbasemaclrn-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
tc17-9000b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc18-9000b-4t4c-eth-l2bdbasemaclrn-pdrdisc |
|
10.1.7.56. 40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC NIC_Cisco-VIC-1385.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc05-9000b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc19-imix-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc20-imix-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc21-imix-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
10.1.7.57. 40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC XL710-DA2 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
tc19-imix-1t1c-eth-l2bdbasemaclrn-ndrdisc |
|
tc20-imix-2t2c-eth-l2bdbasemaclrn-ndrdisc |
|
tc21-imix-4t4c-eth-l2bdbasemaclrn-ndrdisc |
|
10.1.7.58. 40ge2p1xl710-eth-l2xcbase-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-ndrdisc |
|
tc03-1518b-1t1c-eth-l2xcbase-ndrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-ndrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-ndrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-ndrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-ndrdisc |
|
tc19-imix-1t1c-eth-l2xcbase-ndrdisc |
|
tc20-imix-2t2c-eth-l2xcbase-ndrdisc |
|
tc21-imix-4t4c-eth-l2xcbase-ndrdisc |
|
10.1.8. srv6¶
10.1.8.1. 10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc¶
Packet throughput Segment routing over IPv6 dataplane with one SID (SRH not inserted) test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc |
|
tc02-78b-1t1c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc |
|
tc03-78b-2t2c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc |
|
tc04-78b-2t2c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc |
|
tc05-78b-4t4c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc |
|
tc06-78b-4t4c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc |
|
tc07-1518b-1t1c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc |
|
tc08-1518b-1t1c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc |
|
tc09-1518b-2t2c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc |
|
tc10-1518b-2t2c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc |
|
tc11-1518b-4t4c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc |
|
tc12-1518b-4t4c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc |
|
10.1.8.2. 10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc¶
Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over SRv6.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and two SR behaviours (functions) - End and End.DX6 - for other direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc |
|
tc02-78b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc |
|
tc03-78b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc |
|
tc04-78b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc |
|
tc05-78b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc |
|
tc06-78b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc |
|
tc07-1518b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc |
|
tc08-1518b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc |
|
tc09-1518b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc |
|
tc10-1518b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc |
|
tc11-1518b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc |
|
tc12-1518b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc |
|
10.1.8.3. 10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc¶
Packet throughput Segment routing over IPv6 dataplane with two SIDs (SRH inserted) without decapsulation test cases
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static route, SR policy and steering policy for one direction and one SR behaviour (function) - End - for other direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header,IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-78b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc |
|
tc02-78b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc |
|
tc03-78b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc |
|
tc04-78b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc |
|
tc05-78b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc |
|
tc06-78b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc |
|
tc07-1518b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc |
|
tc08-1518b-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc |
|
tc09-1518b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc |
|
tc10-1518b-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc |
|
tc11-1518b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc |
|
tc12-1518b-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc |
|
10.1.9. vm vhost¶
10.1.9.1. 10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.2. 10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.3. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel..
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
10.1.9.4. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.5. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
10.1.9.6. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc03-1518b-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc |
|
10.1.9.7. 10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domains and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
10.1.9.8. 10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel..
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:c3:4f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:c3:4f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:c3:4f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:c3:4f,
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
10.1.9.9. 10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel..
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:13:87, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:13:87, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:13:87, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:13:87,
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
10.1.9.10. 10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel..
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f,
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
10.1.9.11. 10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
10.1.9.12. 10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.13. 10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2XC test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
10.1.9.14. 10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc¶
RFC2544: Packet throughput L2XC test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc03-1518b-1t1c-etc-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc |
|
10.1.9.15. 10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc¶
RFC2544: Pkt throughput L2XC test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connects. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
10.1.9.16. 10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc |
|
10.1.9.17. 10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.18. 10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc¶
RFC2544: Packet throughput IP4 test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc03-1518b-1t1c–ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc05-imix-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc06-imix-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc11-imix-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc12-imix-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
tc17-imix-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc |
|
tc18-imix-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc |
|
10.1.9.19. 10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc¶
RFC2544: Packet throughput IP4 test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc05-imix-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc06-imix-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc11-imix-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc12-imix-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
tc17-imix-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc |
|
tc18-imix-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc |
|
10.1.9.20. 10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc¶
RFC2544: Pkt throughput IPv4 test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static IPv4 /24 route entries. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc02-64b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc03-1518b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc04-1518b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc05-imix-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc06-imix-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc07-64b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc08-64b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc09-1518b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc10-1518b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc11-imix-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc12-imix-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc13-64b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc14-64b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc15-1518b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc16-1518b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc17-imix-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc18-imix-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
10.1.9.21. 10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 and vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.22. 10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Pkt throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.23. 40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc |
|
10.1.9.24. 40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc¶
RFC2544: Packet throughput L2BD test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc |
|
10.1.9.25. 40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc¶
RFC2544: Packet throughput L2XC test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connects. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 (cpus 24-28 and 29-34) and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc02-64b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc03-1518b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc04-1518b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc05-imix-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc06-imix-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc07-64b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc08-64b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc09-1518b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc10-1518b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc11-imix-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc12-imix-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc13-64b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc14-64b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc15-1518b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc16-1518b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
tc17-imix-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc |
|
tc18-imix-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc |
|
10.1.9.26. 40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc¶
RFC2544: Packet throughput IP14 test cases with vhost
- [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 forIPv4 routing.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static IPv4 /24 route entries. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 (cpus 24-28 and 29-34) and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
- [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance or throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using either binary search or linear search algorithms with configured starting rate and final step that determines throughput measurement resolution. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
- [Ref] Applicable standard specifications: RFC2544.
Name | VPP API Test (VAT) Commands History - Commands Used Per Test Case |
---|---|
tc01-64b-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc02-64b-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc03-1518b-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc04-1518b-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc05-imix-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc06-imix-1t1c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc07-64b-2t2c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc08-64b-2t2c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc09-1518b-2t2c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc10-1518b-2t2c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc11-imix-2t2c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc12-imix-2t2c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc13-64b-4t4c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc14-64b-4t4c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc15-1518b-4t4c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc16-1518b-4t4c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|
tc17-imix-4t4c-eth-ip4base-eth-4vhostvr1024-2vm-ndrdisc |
|
tc18-imix-4t4c-eth-ip4base-eth-4vhostvr1024-2vm-pdrdisc |
|