Note
Data sources for reported test results: i) FD.io test executor jobs hc2vpp-csit-integration-1701-ubuntu1404/1 , ii) archived FD.io jobs test result output files.
7.4.1. mgmt-cfg-acl-apihc-apivat-func¶
Honeycomb access control lists test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb can create ACL classify table | Check if Honeycomb API can create an ACL table. | PASS |
| TC02: Honeycomb can remove ACL table | Check if Honeycomb API can delete an ACL table. | PASS |
| TC03: Honeycomb manages more than one ACL table | Check if Honeycomb API can create another ACL table. | PASS |
| TC04: Honeycomb can add ACL session to table | Check if Honeycomb API can add an ACL session to a table. | PASS |
| TC05: Honeycomb can remove ACL session | Check if Honeycomb API can remove an ACL session. | PASS |
| TC06: Honeycomb manages more than one ACL session on one table | Check if Honeycomb API can add another ACL session to a table. | PASS |
| TC07: Honeycomb enables ACL on interface | Check if Honeycomb API can enable ACL on an interface. | PASS |
| TC08: Honeycomb disables ACL on interface | Check if Honeycomb API can disable ACL on an interface. | PASS |
| TC09: Honeycomb can remove one out of multiple ACL tables | Check if Honeycomb API can delete an ACL table if more than one table exists. | PASS |
7.4.2. mgmt-cfg-int-apihcnc-func¶
Netconf test suite. Contains test cases that need to bypass REST API.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb can create and delete interfaces | Repeatedly create and delete an interface through Netconf and check the reply for any errors. | PASS |
| TC02: Transaction revert test case 1 | Configure two conflicting VxLAN tunnels, then verify that neither tunnel exists. | PASS |
| TC03: Transaction revert test case 2 | Configure two conflicting TAP interfaces, then verify that neither interface exists. | PASS |
7.4.3. mgmt-cfg-int-subint-apihc-apivat-func¶
Honeycomb sub-interface management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honycomb creates sub-interface | Check if Honeycomb creates a sub-interface. | PASS |
| TC02: Honeycomb sets interface and sub-interface up | Honeycomb changes the state of interface and of its sub-interface to up. | PASS |
| TC03: Honeycomb sets sub-interface down while its super-interface is up | Honeycomb sets the sub-interface down while its super-interface is up. It must be possible. | PASS |
| TC04: Honeycomb sets interface and sub-interface down | Honeycomb changes the state of interface down and then changes the state of its sub-interface down, in this order. | PASS |
| TC05: Honeycomb fails to set sub-interface up while its super-interface is down | Honeycomb tries to set the sub-interface up while its super-interface is down. It must not be possible. | PASS |
| TC06: Honeycomb fails to delete sub-interface | Check if Honeycomb can delete an existing sub-interface. | PASS |
| TC07: Honeycomb adds sub-interface to new bridge domain | Check if Honeycomb adds a sub-interface to bridge domain. | PASS |
| TC08: Honeycomb enables tag-rewrite pop 1 | Check if Honeycomb enables tag-rewrite and sets its parameters correctly. Case: pop 1. | PASS |
| TC09: Honeycomb enables tag-rewrite push | Check if Honeycomb enables tag-rewrite and sets its parameters correctly. Case: push. | PASS |
| TC10: Honeycomb enables tag-rewrite translate 1-2 | Check if Honeycomb enables tag-rewrite and sets its parameters correctly. Case: translate 1-2. | PASS |
| TC11: Honeycomb disables tag-rewrite | Check if Honeycomb disables the tag-rewrite. | PASS |
| TC12: Honeycomb enables tag-rewrite pop 1 again | Check if Honeycomb can enable tag-rewrite again, once it was disabled by Honeycomb. | PASS |
| TC13: Honeycomb modifies the tag-rewrite | Honeycomb sets the tag-rewrite: 1. pop 1, then 2. push, then 3. translate 1 - 2 Then Honeycomb disables the tag-rewrite. | PASS |
| TC14: Honeycomb fails to set wrong vlan-type in tag-rewrite | Check that Honeycomb does not accept wrong values of vlan-type in tag-rewrite. | PASS |
| TC15: Honeycomb configures sub-interface ipv4 address | Check if Honeycomb can configure an ipv4 address on the sub-interface. | PASS |
| TC16: Honeycomb removes sub-interface ipv4 address | Check if Honeycomb can remove configured ipv4 addresses from the sub-interface. | PASS |
| TC17: Honeycomb modifies existing sub-interface ipv4 address | Check if Honeycomb can modify an ipv4 address already configured on the sub-interface. | PASS |
7.4.4. mgmt-cfg-intip4-intip6-apihc-apivat-func¶
Honeycomb interface management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb configures and reads interface state | Check if Honeycomb API can modify the admin state of VPP interfaces. | PASS |
| TC02: Honeycomb modifies interface IPv4 address with netmask | Check if Honeycomb API can configure interfaces for ipv4 with address and netmask provided. | PASS |
| TC03: Honeycomb removes IPv4 address from interface | Check if Honeycomb API can remove configured ipv4 addresses from interface. | PASS |
| TC04: Honeycomb modifies interface IPv4 address with prefix | Check if Honeycomb API can configure interfaces for ipv4 with address and prefix provided. | PASS |
| TC05: Honeycomb modifies IPv4 neighbor table | Check if Honeycomb API can add and remove ARP entries. | PASS |
| TC06: Honeycomb modifies interface configuration - IPv6 | Check if Honeycomb API can configure interfaces for ipv6. | PASS |
| TC07: Honeycomb modifies interface configuration - MTU | Check if Honeycomb API can configure interface MTU value. | PASS |
7.4.5. mgmt-cfg-inttap-apihc-apivat-func¶
Honeycomb TAP management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb configures TAP interface | Check if Honeycomb API can configure a TAP interface. | PASS |
| TC02: Honeycomb modifies existing TAP interface configuration | Check if Honeycomb API can re-configure and existing TAP interface with new settings. | PASS |
| TC03: Honeycomb removes TAP interface | Check if Honeycomb API can remove TAP interface. | PASS |
7.4.6. mgmt-cfg-intvhost-apihc-apivat-func¶
Honeycomb vhost-user interface management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb creates vhost-user interface - server | Check if Honeycomb creates a vhost-user interface, role: server. | FAIL |
| TC02: Honeycomb modifies vhost-user interface - server | Check if Honeycomb can modify properties of existing vhost-user interface, role: server. | FAIL |
| TC03: Honeycomb deletes vhost-user interface - server | Check if Honeycomb can delete an existing vhost-user interface, role: server. | FAIL |
| TC04: Honeycomb creates vhost-user interface - client | Check if Honeycomb creates a vhost-user interface, role: client. | FAIL |
| TC05: Honeycomb modifies vhost-user interface - client | Check if Honeycomb can modify properties of existing vhost-user interface, role: client. | FAIL |
| TC06: Honeycomb deletes vhost-user interface - client | Check if Honeycomb can delete an existing vhost-user interface, role: client. | FAIL |
| TC07: Honeycomb does not set vhost-user configuration on another interface type | Check if Honeycomb refuses to set vhost-user configuration for interface which is not v3po:vhost-user type. | FAIL |
| TC08: Honeycomb does not set invalid vhost-user configuration | Check if Honeycomb refuses to set invalid parameters to vhost-user interface. | FAIL |
7.4.7. mgmt-cfg-l2bd-apihc-apivat-func¶
Honeycomb bridge domain management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb sets up l2 bridge domain | Check if Honeycomb can create bridge domains on VPP node. | PASS |
| TC02: Honeycomb manages multiple bridge domains on node | Check if Honeycomb can manage multiple bridge domains on a single node. | PASS |
| TC03: Honeycomb removes bridge domains | Check if Honeycomb can remove bridge domains from a VPP node. | PASS |
| TC04: Honeycomb assigns interfaces to bridge domain | Check if Honeycomb can assign VPP interfaces to an existing bridge domain. | PASS |
| TC05: Honeycomb cannot remove bridge domain with an interface assigned | Check if Honeycomb can remove a bridge domain that has an interface assigned to it. Expect to fail with code 500. | PASS |
7.4.8. mgmt-cfg-l2fib-apihc-apivat-func¶
Honeycomb L2 FIB management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb adds L2 FIB entry (forward) | Honeycomb creates a bridge domain and assignes an interface to it. Then adds an L2 FIB entry (forward) to the bridge domain. | PASS |
| TC02: Honeycomb adds L2 FIB entry (static, forward) | Honeycomb adds an L2 FIB entry (static, forward) to the bridge domain. | PASS |
| TC03: Honeycomb adds L2 FIB entry (static, filter) | Honeycomb adds an L2 FIB entry (static, filter) to the bridge domain. | PASS |
| TC04: Honeycomb adds and removes L2 FIB entry (forward) | Honeycomb adds an L2 FIB entry (forward) to the bridge domain and then Honeycomb removes it from the bridge domain. | PASS |
| TC05: Honeycomb adds more than one L2 FIB entry | Honeycomb adds three L2 FIB entries to the bridge domain. | PASS |
| TC06: Honeycomb fails to set wrong L2 FIB entry | Honeycomb tries to add an L2 FIB entry with wrong parameters to the bridge domain. It must fail. | PASS |
| TC07: Honeycomb fails to modify existing L2 FIB entry | Honeycomb tries to modify an existing L2 FIB entry. It must fail. | PASS |
7.4.9. mgmt-cfg-lisp-apihc-apivat-func¶
Honeycomb Lisp test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb enables Lisp feature | Check if Honeycomb can enable the Lisp feature. | PASS |
| TC02: Honeycomb adds locator set and locator | Check if Honeycomb can configure a locator set. | PASS |
| TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain | Check if Honeycomb can configure a remote Lisp mapping with a bridge domain. | PASS |
| TC04: Honeycomb can remove Lisp mapping | Check if Honeycomb can remove a configured Lisp mapping. | PASS |
| TC05: Honeycomb configures Lisp - remote mapping - VRF | Check if Honeycomb can configure a remote Lisp mapping with VRF. | PASS |
| TC06: Honeycomb configures Lisp - local mapping - Bridge Domain | Check if Honeycomb can configure a local Lisp mapping with a bridge domain. | PASS |
| TC07: Honeycomb configures Lisp - local mapping - VRF | Check if Honeycomb can configure a local Lisp mapping with VRF. | PASS |
| TC08: Honeycomb configures Lisp mapping with adjacency | Check if Honeycomb can configure local and remote Lisp mappings with VRF, and configure adjacency. | PASS |
| TC09: Honeycomb configures Lisp map resolver | Check if Honeycomb can configure a Lisp map resolver. | PASS |
| TC10: Honeycomb enabled Lisp PITR feature | Check if Honeycomb can configure the Lisp PITR feature. | PASS |
| TC11: Honeycomb can remove configuration of Lisp features | Check if Honeycomb can disable all Lisp features. | PASS |
7.4.10. mgmt-cfg-nsh-apihc-apivat-func¶
Honeycomb NSH test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb can configure NSH entry | Check if Honeycomb can configure an NSH entry. | PASS |
| TC02: Honeycomb can remove NSH entry | Check if Honeycomb can remove an existing NSH entry. | PASS |
| TC03: Honeycomb can configure new NSH entry | Check if Honeycomb can configure an NSH antry after one has been deleted. | PASS |
| TC04: Honeycomb can configure multiple NSH entries at the same time | Check if Honeycomb can configure an NSH entry when one already exists. | PASS |
| TC05: Honeycomb can configure NSH map | Check if Honeycomb can configure an NSH map. | PASS |
| TC06: Honeycomb can remove NSH map | Check if Honeycomb can remove an existing NSH map. | PASS |
| TC07: Honeycomb can modify existing NSH map | Check if Honeycomb can configure an NSH map after one has been deleted. | PASS |
| TC08: Honeycomb can configure multiple NSH maps at the same time | Check if Honeycomb can configure and NSH map when one already exists. | PASS |
7.4.11. mgmt-cfg-pbb-apihc-apivat-func¶
Honeycomb provider backbone bridge test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb sets PBB sub-interface | Honeycomb creates a new PBB sub-interface. | PASS |
| TC02: Honeycomb modifies existing PBB sub-interface | Honeycomb modifies an existing PBB sub-interface. | PASS |
| TC03: Honeycomb deletes existing PBB sub-interface | Honeycomb deletes an existing PBB sub-interface. | PASS |
| TC04: Honeycomb fails to set wrong destination-address for new PBB sub-interface | Honeycomb fails to create a new PBB sub-interface with wrong value of parameter destination-address, type yang:mac-address. | PASS |
| TC05: Honeycomb fails to set wrong source-address for new PBB sub-interface | Honeycomb fails to create a new PBB sub-interface with wrong value of parameter source-address, type yang:mac-address. | PASS |
| TC06: Honeycomb fails to set wrong b-vlan-tag-vlan-id for new PBB sub-interface | Honeycomb fails to create a new PBB sub-interface with wrong value of parameter b-vlan-tag-vlan-id, type uint16, 12 bit range, range 1..4095. | PASS |
| TC07: Honeycomb fails to set wrong i-tag-isid for new PBB sub-interface | Honeycomb fails to create a new PBB sub-interface with wrong value of parameter i-tag-isid, type uint32, 24 bit range, range 1..16777215. | PASS |
| TC08: Honeycomb fails to create new PBB sub-interface without vlan tag | Honeycomb fails to create a new PBB sub-interface without parameter b-vlan-tag-vlan-id. | PASS |
7.4.12. mgmt-cfg-snat44-apihc-apivat-func¶
Honeycomb NAT test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb configures NAT entry | Honeycomb configures a static NAT entry. | PASS |
| TC02: Honeycomb removes NAT entry | Honeycomb removes a configured static NAT entry. | PASS |
| TC03: Honeycomb configures multiple NAT entries | Honeycomb configures two static NAT entries. | PASS |
| TC04: Honeycomb enables NAT on interface - inbound | Honeycomb configures NAT on an interface in inbound direction. | PASS |
| TC05: Honeycomb removes NAT interface configuration | Honeycomb removes NAT configuration from an interface. | PASS |
| TC06: Honeycomb enables NAT on interface - outbound | Honeycomb configures NAT on an interface in outbound direction. | PASS |
7.4.13. mgmt-cfg-vxlan-apihc-apivat-func¶
Honeycomb VxLAN management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb configures VxLAN tunnel | Check if Honeycomb API can configure VxLAN settings. | PASS |
| TC02: Honeycomb disables VxLAN tunnel | Check if Honeycomb API can reset VxLAN configuration. | PASS |
| TC03: Honeycomb can configure VXLAN tunnel after one has been disabled | Check if Honeycomb API can configure VxLAN settings again after previous settings have been removed. | PASS |
| TC04: Honeycomb does not set VxLAN configuration on another interface type | Check if Honeycomb API prevents setting VxLAN on incorrect interface. | PASS |
| TC05: Honeycomb does not set invalid VxLAN configuration | Check if Honeycomb API prevents setting incorrect VxLAN settings. | PASS |
| TC06: Honeycomb configures VxLAN tunnel with ipv6 | Check if Honeycomb API can configure VxLAN with ipv6 settings. | PASS |
7.4.14. mgmt-cfg-vxlangpe-apihc-apivat-func¶
Honeycomb VxLAN-GPE management test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb creates VxLAN GPE tunnel | Check if Honeycomb API can configure a VxLAN GPE tunnel. | PASS |
| TC02: Honeycomb removes VxLAN GPE tunnel | Check if Honeycomb API can remove VxLAN GPE tunnel. | PASS |
| TC03: Honeycomb sets wrong interface type while creating VxLAN GPE tunnel | Check if Honeycomb refuses to create a VxLAN GPE tunnel with a wrong interface type set. | PASS |
| TC04: Honeycomb sets wrong protocol while creating VxLAN GPE tunnel | Check if Honeycomb refuses to create a VxLAN GPE tunnel with a wrong next-protocol set. | PASS |
| TC05: Honeycomb sets VxLAN GPE tunnel on existing interface with wrong type | Check if Honeycomb refuses to create a VxLAN GPE tunnel on existing interface with wrong type. | PASS |
| TC06: Honeycomb creates VxLAN GPE tunnel with ipv6 | Check if Honeycomb API can configure a VxLAN GPE tunnel with IPv6 addresses. | PASS |
| TC07: Honeycomb creates a second VxLAN GPE tunnel with ipv6 | Check if Honeycomb API can configure another VxLAN GPE tunnel with IPv6 addresses. | PASS |
7.4.15. mgmt-notif-apihcnc-func¶
Honeycomb notifications test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb sends notification on interface state change | Check if Honeycomb sends a state-changed notification when the state of an interface is changed. | PASS |
| TC02: Honeycomb sends notification on interface deletion | Check if Honeycomb sends an interface-deleted notification when an interface is deleted. | PASS |
7.4.16. mgmt-statepersist-apihc-func¶
Honeycomb configuration persistence test suite.
| Name | Documentation | Status |
|---|---|---|
| TC01: Honeycomb persists configuration through restart of both Honeycomb and VPP | Checks if Honeycomb maintains configuration after both Honeycomb and VPP are restarted. | FAIL |
| TC02: Honeycomb persists configuration through restart of Honeycomb | Checks if Honeycomb maintains configuration after it is restarted. | FAIL |
| TC03: Honeycomb persists configuration through restart of VPP | Checks if Honeycomb updates VPP settings after VPP is restarted. | FAIL |
| TC04: Honeycomb reverts to defaults if persistence files are invalid | Checks if Honeycomb reverts to default configuration when persistence files are damaged or invalid. | PASS |