crypto

10ge2p1x553-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-mrr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 1518b-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 TRex stateless runtime error 

 1518b-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.16, 0.27, 0.16, 0.55, 0.16, 0.16, 0.16, 0.16, 0.15, 0.17] 

 1518b-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 TRex stateless runtime error 

 imix-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.37, 0.38, 0.35, 0.38, 0.35, 0.39, 0.36, 0.35, 0.36, 0.37] 

 imix-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.62, 0.61, 0.63, 0.60, 0.62, 0.64, 0.61, 0.62, 0.62, 0.61] 

 imix-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [1.25, 1.21, 1.25, 1.25, 1.24, 1.23, 1.24, 1.22, 1.23, 1.23] 

10ge2p1x553-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-mrr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 1518b-1t1c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-mrr

 [0.36, 0.38, 0.37, 0.34, 0.37, 0.39, 0.36, 0.37, 0.34, 0.40] 

 1518b-2t2c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-mrr

 [0.53, 0.53, 0.53, 0.53, 0.53, 0.53, 0.53, 0.53, 0.53, 0.53] 

 1518b-4t4c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-mrr

 [1.31, 1.37, 1.24, 1.32, 1.29, 1.34, 1.30, 1.34, 1.31, 1.18] 

 imix-1t1c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-mrr

 [0.56, 0.57, 0.56, 0.56, 0.56, 0.56, 1.01, 0.86, 0.84, 0.81] 

 imix-2t2c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-mrr

 [1.90, 1.91, 1.92, 1.78, 1.91, 1.88, 1.77, 1.88, 1.86, 1.84] 

 imix-4t4c-ethip4ipsec1000tnlsw- 
ip4base-int-aes256gcm-mrr

 [2.17, 2.23, 3.63, 3.26, 2.63, 2.84, 3.20, 3.75, 3.50, 3.28] 

10ge2p1x553-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-mrr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 1518b-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.08, 0.08, 0.08, 0.08, 0.08, 0.08, 0.08, 0.08, 0.08, 0.08] 

 1518b-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17, 0.17] 

 1518b-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.29, 0.25, 0.26, 0.25, 0.31, 0.27, 0.26, 0.26, 0.26, 0.26] 

 imix-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.43, 0.44, 0.44, 0.41, 0.42, 0.42, 0.44, 0.44, 0.43, 0.41] 

 imix-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [0.40, 0.39, 0.39, 0.54, 0.55, 0.39, 0.40, 0.39, 0.39, 0.39] 

 imix-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-mrr

 [1.40, 1.38, 1.40, 1.39, 1.39, 1.36, 1.17, 1.39, 1.17, 1.35] 

10ge2p1x553-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-mrr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 1518b-1t1c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-mrr

 [0.35, 0.35, 0.35, 0.35, 0.35, 0.35, 0.35, 0.35, 0.35, 0.35] 

 1518b-2t2c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-mrr

 [0.69, 0.68, 0.68, 0.68, 0.68, 0.68, 0.68, 0.68, 0.68, 0.68] 

 1518b-4t4c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-mrr

 [1.36, 1.35, 1.36, 1.31, 1.33, 1.33, 1.32, 1.36, 1.36, 1.29] 

 imix-1t1c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-mrr

 [0.90, 0.91, 0.90, 0.90, 0.90, 0.90, 0.90, 0.90, 0.91, 0.90] 

 imix-2t2c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-mrr

 [1.76, 1.76, 1.76, 1.76, 1.76, 1.76, 1.76, 1.76, 1.76, 1.76] 

 imix-4t4c-ethip4ipsec4tnlsw- 
ip4base-int-aes256gcm-mrr

 [3.50, 3.48, 3.50, 3.49, 3.50, 3.49, 3.49, 3.51, 3.50, 3.49] 

ip4

10ge2p1x553-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-ethip4-ip4base-mrr 

 [6.11, 6.12, 6.10, 6.12, 6.11, 6.11, 6.12, 6.11, 6.10, 6.11] 

 64b-2t2c-ethip4-ip4base-mrr 

 [11.63, 11.62, 11.62, 11.59, 11.60, 11.61, 11.62, 11.62, 11.61, 11.63] 

 64b-4t4c-ethip4-ip4base-mrr 

 [22.71, 22.51, 22.51, 22.57, 22.52, 22.57, 22.58, 22.58, 22.50, 22.50] 

10ge2p1x553-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
ethip4-ip4scale20k-mrr

 [4.78, 4.79, 4.78, 4.80, 4.79, 4.77, 4.78, 4.77, 4.78, 4.78] 

 64b-2t2c- 
ethip4-ip4scale20k-mrr

 [9.00, 8.97, 8.96, 8.95, 8.96, 8.94, 8.97, 8.95, 8.96, 8.96] 

 64b-4t4c- 
ethip4-ip4scale20k-mrr

 [17.35, 17.30, 17.33, 17.44, 17.39, 17.34, 17.32, 17.46, 17.34, 17.32] 

ip4 tunnels

10ge2p1x553-ethip4vxlan-l2bdbasemaclrn-mrr

RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
ethip4vxlan-l2bdbasemaclrn-mrr

 [3.65, 3.66, 3.66, 3.66, 3.66, 3.65, 3.65, 3.65, 3.65, 3.65] 

 64b-2t2c- 
ethip4vxlan-l2bdbasemaclrn-mrr

 [6.52, 6.51, 6.52, 6.51, 6.51, 6.51, 6.51, 6.51, 6.51, 6.51] 

 64b-4t4c- 
ethip4vxlan-l2bdbasemaclrn-mrr

 [12.10, 12.10, 12.09, 12.09, 12.09, 12.10, 12.10, 12.10, 12.08, 12.09] 

10ge2p1x553-ethip4vxlan-l2xcbase-mrr

RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544, RFC7348.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
ethip4vxlan-l2xcbase-mrr

 [4.41, 4.41, 4.41, 4.41, 4.40, 4.40, 4.40, 4.41, 4.40, 4.41] 

 64b-2t2c- 
ethip4vxlan-l2xcbase-mrr

 [7.72, 7.71, 7.71, 7.70, 7.71, 7.70, 7.70, 7.70, 7.71, 7.71] 

 64b-4t4c- 
ethip4vxlan-l2xcbase-mrr

 [14.32, 14.32, 14.31, 14.32, 14.32, 14.32, 14.33, 14.31, 14.30, 14.30] 

ip6

10ge2p1x553-ethip6-ip6base-mrr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c-ethip6-ip6base-mrr 

 [5.10, 5.09, 5.08, 5.07, 5.06, 5.06, 5.06, 5.06, 5.06, 5.07] 

 78b-2t2c-ethip6-ip6base-mrr 

 [10.20, 10.20, 10.20, 10.20, 10.20, 10.19, 10.19, 10.19, 10.19, 10.19] 

 78b-4t4c-ethip6-ip6base-mrr 

 [19.81, 19.83, 19.81, 19.81, 19.81, 19.80, 19.81, 19.79, 19.81, 19.81] 

10ge2p1x553-ethip6-ip6scale20k-mrr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 78b-1t1c- 
ethip6-ip6scale20k-mrr

 [2.39, 2.43, 2.34, 2.34, 2.33, 2.33, 2.43, 2.36, 2.37, 2.39] 

 78b-2t2c- 
ethip6-ip6scale20k-mrr

 [4.77, 4.69, 4.52, 4.51, 4.58, 4.72, 4.54, 4.44, 4.49, 4.26] 

 78b-4t4c- 
ethip6-ip6scale20k-mrr

 [9.06, 8.91, 8.93, 8.82, 8.60, 8.45, 8.42, 8.41, 8.51, 8.52] 

l2

10ge2p1x553-eth-l2bdbasemaclrn-mrr

RFC2544: Pkt throughput L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
eth-l2bdbasemaclrn-mrr

 [5.94, 5.95, 5.95, 5.96, 5.96, 5.95, 5.95, 5.96, 5.95, 5.96] 

 64b-2t2c- 
eth-l2bdbasemaclrn-mrr

 [11.40, 11.41, 11.37, 11.39, 11.39, 11.39, 11.40, 11.41, 11.42, 11.38] 

 64b-4t4c- 
eth-l2bdbasemaclrn-mrr

 [22.20, 22.22, 22.22, 22.21, 22.18, 22.20, 22.18, 22.13, 22.14, 22.17] 

10ge2p1x553-eth-l2bdscale10kmaclrn-mrr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c- 
eth-l2bdscale10kmaclrn-mrr

 [3.87, 3.90, 3.89, 3.88, 3.89, 3.88, 3.88, 3.88, 3.89, 3.89] 

 64b-2t2c- 
eth-l2bdscale10kmaclrn-mrr

 [7.69, 7.72, 7.70, 7.72, 7.70, 7.69, 7.69, 7.69, 7.71, 7.70] 

 64b-4t4c- 
eth-l2bdscale10kmaclrn-mrr

 [14.30, 14.32, 14.33, 14.11, 14.34, 14.40, 14.19, 14.25, 14.29, 14.18] 

10ge2p1x553-eth-l2patch-mrr

RFC2544: Pkt throughput L2patch test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 patch.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 patch DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header,IPv4 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2patch-mrr 

 [12.10, 12.10, 12.09, 12.11, 12.10, 12.09, 12.11, 12.12, 12.10, 12.10] 

 64b-2t2c-eth-l2patch-mrr 

 [22.39, 22.40, 22.38, 22.38, 22.38, 22.39, 22.39, 22.39, 22.39, 22.41] 

 64b-4t4c-eth-l2patch-mrr 

 [29.76, 29.76, 29.76, 29.76, 29.76, 29.76, 29.76, 29.76, 29.76, 29.76] 

10ge2p1x553-eth-l2xcbase-mrr

RFC2544: Pkt throughput L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with Intel-X553.

  • [Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2xcbase-mrr 

 [8.07, 8.07, 8.08, 8.07, 8.07, 8.08, 8.08, 8.07, 8.08, 8.07] 

 64b-2t2c-eth-l2xcbase-mrr 

 [15.14, 15.13, 15.12, 15.12, 15.13, 15.15, 15.13, 15.12, 15.14, 15.12] 

 64b-4t4c-eth-l2xcbase-mrr 

 [29.02, 29.04, 29.04, 29.00, 28.97, 29.04, 29.02, 29.05, 29.03, 29.07]