.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


3n-tsh-x520
```````````

10ge2p1x520-ethip4-ip4base-mrr
''''''''''''''''''''''''''''''

**RFC2544: Pkt throughput IPv4 routing test cases**

- **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular 	opology with single links between nodes.

- **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing.

- **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. 
outing and two static IPv4 /24 route entries. DUT1 and DUT2 are 	ested with Intel-X520-DA2.

- **[Ver] TG vefication:** In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

- **[Ref] Applicable standard specifications:** RFC2544.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: 10ge2p1x520-ethip4-ip4base-mrr.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_mrr_results_3n_tsh/10ge2p1x520-ethip4-ip4base-mrr.csv}


10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr
'''''''''''''''''''''''''''''''''''''''''''''''''''

**RFC2544: Packet throughput IPv4 test cases with ACL**

- **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular 	opology with single links between nodes.

- **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.

- **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. 
outing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

- **[Ver] TG vefication:** In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, ${flows_per_dir} flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

- **[Ref] Applicable standard specifications:** RFC2544.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: 10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_mrr_results_3n_tsh/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.csv}


10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr
'''''''''''''''''''''''''''''''''''''''''''''''''''

**RFC2544: Packet throughput IPv4 test cases with ACL**

- **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular 	opology with single links between nodes.

- **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.

- **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. 
outing and one static IPv4 /24 route entries. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

- **[Ver] TG vefication:** In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, ${flows_per_dir} flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

- **[Ref] Applicable standard specifications:** RFC2544.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: 10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_mrr_results_3n_tsh/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.csv}


10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-mrr
'''''''''''''''''''''''''''''''''''''''''''''''''''

**RFC2544: Packet throughput IPv4 test cases with ACL**

- **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular 	opology with single links between nodes.

- **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.

- **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. 
outing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are 	ested with Intel-X520-DA2.

- **[Ver] TG vefication:** In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, ${flows_per_dir} flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

- **[Ref] Applicable standard specifications:** RFC2544.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: 10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-mrr.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_mrr_results_3n_tsh/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-mrr.csv}


10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-mrr
'''''''''''''''''''''''''''''''''''''''''''''''''''

**RFC2544: Packet throughput IPv4 test cases with ACL**

- **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular 	opology with single links between nodes.

- **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for IPv4 routing.

- **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. 
outing and one static IPv4 /24 route entries. Required ACL rules are applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are 	ested with Intel-X520-DA2.

- **[Ver] TG vefication:** In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, ${flows_per_dir} flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

- **[Ref] Applicable standard specifications:** RFC2544.

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: 10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-mrr.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_mrr_results_3n_tsh/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-mrr.csv}