.. |br| raw:: html
.. |prein| raw:: html


.. |preout| raw:: html

    
srv6 ```` 2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''' 2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''' **Segment routing over IPv6 dataplane with one SID (SRH not inserted) test suite.** - **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes. - **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with one SID - Segment Routing Header not inserted. - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. - **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy.csv} 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' **Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.** - **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes. - **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted. - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. - **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy.csv} 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''''''' 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''''''' **Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite.** - **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes. - **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted. - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. - **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.csv} 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy ''''''''''''''''''''''''''''''''''''''''''''''''''''''''' 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy ''''''''''''''''''''''''''''''''''''''''''''''''''''''''' **Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test suite.** - **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes. - **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted. - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. - **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy.csv} 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' **Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases** - **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes. - **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted. - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. - **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy.csv} 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' 2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' **Segment routing over IPv6 dataplane with Static SRv6 proxy test cases.** - **[Top] Network topologies:** TG-DUT1 2-node topology with one link between nodes. - **[Cfg] DUT configuration:** On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted. - **[Ver] TG verification:** ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. - **[Ref] Applicable standard specifications:** SRv6 Network Programming - draft 3. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy.csv}